LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
MICROCHIP PIC12F752T-I/MF product image
Images for reference only

MICROCHIP PIC12F752T-I/MF

Manufacturer
MICROCHIP
MPN
PIC12F752T-I/MF
LCSC Part #
C624019
Packaging
DFN-8-EP(3x3)
Customer #
Key Attributes
PIC 8 Bit 20MHz DFN-8-EP(3x3) Microcontrollers RoHS
DatasheetMICROCHIP PIC12F752T-I/MF
RoHS Compliance2 documents available
Alternative Parts5
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Embedded/Microcontrollers
ManufacturerMICROCHIP
PackagingDFN-8-EP(3x3)
DAC (Bit)5bit
ADC (Bit)10bit
Number of I/O5
Operating Temperature-40℃~+85℃
Program Memory TypeFLASH
Voltage - Supply2V~5.5V
EEPROM-
Program Storage Size1.75KB
CPU CorePIC
Core Size8 Bit
CPU Maximum Speed20MHz
Oscillator TypeBuilt-in
Help & FeedbackShow similar products (0) >

Features

AI Translation
  • High-Performance RISC CPU:
    • Only 35 Instructions to Learn
    • All single-cycle instructions except branches
    • Operating Speed: DC - 20 MHz clock input; DC - 200 ns instruction cycle
    • 1024 x 14 On-chip Flash Program Memory
    • Self Read/Write Program Memory
    • 64 x 8 General Purpose Registers (SRAM)
    • Interrupt Capability
    • 8-Level Deep Hardware Stack
    • Direct, Indirect and Relative Addressing modes
  • Microcontroller Features:
    • Precision Internal Oscillator: Factory calibrated to ±1%, typical; Software selectable frequency: 8 MHz, 4 MHz, 1 MHz or 31 kHz; Software tunable
    • Power-Saving Sleep mode
    • Voltage Range (PIC12F752): 2.0V to 5.5V
    • Shunt Voltage Regulator (PIC12HV752): 2.0V to user defined; 5-volt regulation; 1 mA to 50 mA shunt range
    • Multiplexed Master Clear with Pull-up/Input Pin
    • Interrupt-on-Change Pins
    • Individually Programmable Weak Pull-ups
    • Power-on Reset (POR)
    • Power-up Timer (PWRT)
    • Brown-out Reset (BOR)
    • Watchdog Timer (WDT) with Internal Oscillator for Reliable Operation
    • Industrial and Extended Temperature Range
    • High Endurance Flash: 100,000 write Flash endurance; Flash retention: >40 years
    • Programmable Code Protection
    • In-Circuit Debug (ICD) via Two Pins
    • In-Circuit Serial Programming™ (ICSP™) via Two Pins
  • eXtreme Low-Power (XLP) Features:
    • Sleep Current: 50 nA @ 2.0V, typical
    • Operating Current: 11 μA @ 32 kHz, 2.0V, typical; 260 μA @ 4 MHz, 2.0V, typical
    • Watchdog Timer Current: <1 μA @ 2.0V, typical
  • Peripheral Features:
    • Five I/O Pins and One Input-only Pin
    • High Current Source/Sink: 50 mA I/O, (2 pins); 25 mA I/O, (3 pins)
    • Two High-Speed Analog Comparator modules: 40 ns response time; Fixed Voltage Reference (FVR); Programmable on-chip voltage reference via integrated 5-bit DAC; Internal/external inputs and outputs (selectable); Built-in Hysteresis (software selectable)
    • A/D Converter: 10-bit resolution; Four external channels; Two internal reference voltage channels
    • Dual Range Digital-to-Analog Converter (DAC): 5-bit resolution; Full Range or Limited Range output; 4 mV steps @ 2.0V (Limited Range); 65 mV steps @ 2.0V (Full Range)
    • Fixed Voltage Reference (FVR), 1.2V reference
    • Capture, Compare, PWM (CCP) module: 16-bit Capture, max. resolution = 12.5 ns; Compare, max. resolution = 200 ns; 10-bit PWM, max. frequency = 20 kHz
    • Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler
    • Enhanced Timer1: 16-bit Timer/Counter with Prescaler; External Timer1 Gate (count enable); Four Selectable Clock sources
    • Timer2: 8-Bit Timer/Counter with Prescaler: 8-bit Period Register and Postscaler
    • Hardware Limit Timer (HLT): 8-bit Timer with Prescaler; 8-bit period register and postscaler; Asynchronous H/W Reset sources
    • Complementary Output Generator (COG): Complementary Waveforms from selectable sources; Two I/O (50 mA) for direct MOSFET drive; Rising and/or Falling edge dead-band control; Phase control, Blanking control; Auto-shutdown