LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

Infineon/CYPRESS CY7C1353F-100ACT

Manufacturer
MPN
CY7C1353F-100ACT
LCSC Part #
C2955501
Packaging
LQFP-100(14x20)
Customer #
Key Attributes
4Mbit Parallel Port (Parallel) LQFP-100(14x20) Memory
DatasheetInfineon/CYPRESS CY7C1353F-100ACT
Alternative Parts5
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Memory/Memory
ManufacturerInfineon/CYPRESS
PackagingLQFP-100(14x20)
Operating Temperature0℃~+70℃
FeaturesAuto power-down function
Memory Size4Mbit
Voltage - Supply205mA;3.135V~3.6V
Access Time8ns
Standby Supply Current40mA
InterfaceParallel Port (Parallel)

Introduction

AI Translation

The CY7C1353F is a 3.3V, 256K x 18 synchronous flow-through burst SRAM designed to support unlimited consecutive read and write operations without wait states. The device features advanced No Bus Latency (NoBL™) logic that transfers data every clock cycle, enabling continuous read/write operations. This characteristic significantly improves data throughput through the SRAM, making it especially suitable for systems requiring frequent write-to-read transitions. All synchronous inputs pass through input registers controlled by the rising edge of the clock. The clock input is qualified by a Clock Enable (CEN) signal; when CEN is deasserted, operation is suspended and the previous clock cycle is extended. The maximum access latency from the rising clock edge is 6.5 ns (133-MHz device). Write operations are controlled by two Byte Write Selects (BW[A:B]#) and one Write Enable (WE#) input. All write operations are performed through an on-chip synchronous self-timed write circuit. Three synchronous chip enables (CE1#, CE2, CE3#) and one asynchronous Output Enable (OE#) facilitate memory bank selection and output three-state control. To prevent bus contention, the output drivers synchronously enter three-state during the data portion of a write sequence.

Features

AI Translation
  • Zero wait-state bus operation up to 133 MHz, transferring data every clock cycle
  • Pin-compatible with ZBT™ devices, functionally equivalent
  • Internal self-timed output buffer control, no OE required
  • Registered inputs for flow-through operation
  • Byte-write capability with 256K x 18 universal I/O architecture
  • 2.5V / 3.3V I/O supply
  • Fast clock-to-output time: 6.5 ns (133-MHz devices); 7.5 ns (117-MHz devices); 8.0 ns (100-MHz devices); 11.0 ns (66-MHz devices)
  • Clock Enable (CEN) pin for operation pause
  • Synchronous self-timed write operation
  • Asynchronous output enable
  • JEDEC standard 100 TQFP package
  • Burst capability: linear or interleaved burst order
  • Low standby power consumption