LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

SILICON LABS C8051F981-C-GMR

Manufacturer
MPN
C8051F981-C-GMR
LCSC Part #
C2052927
Packaging
QFN-20-EP(3x3)
Customer #
Key Attributes
51 Series 8 Bit 25MHz QFN-20-EP(3x3) Microcontrollers RoHS
DatasheetSILICON LABS C8051F981-C-GMR
Alternative Parts5
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Embedded/Microcontrollers
ManufacturerSILICON LABS
PackagingQFN-20-EP(3x3)
Number of I/O16
Operating Temperature-40℃~+85℃
Voltage - Supply1.8V~3.6V
Program Memory TypeFLASH
EEPROM-
Program Storage Size8KB
CPU Core51 Series
Core Size8 Bit
CPU Maximum Speed25MHz
Oscillator TypeBuilt-in

Introduction

AI Translation

Ultra Low Power, 8-2 kB Flash, Capacitive Sensing MCU

Features

AI Translation
  • 150 μA/MHz in active mode (24.5 MHz clock)
  • 2 μs wakeup time
  • 10 nA sleep mode with memory retention
  • 50 nA sleep mode with brownout detector
  • 300 nA sleep mode with LFO
  • 600 nA sleep mode with external crystal
  • Supply Voltage 1.8 to 3.6 V
  • Built-in LDO regulator allows a high analog supply voltage and low digital core voltage
  • 2 built-in supply monitors (brownout detector) for sleep mode and active modes
  • ±1 LSB INL (10-bit mode); ±1.5 LSB INL (12-bit mode) no missing codes
  • Programmable throughput up to 300 ksps (10-bit mode) or 75 ksps (12-bit mode)
  • Up to 10 external inputs
  • On-chip voltage reference; 0.5× gain allows measuring voltages up to twice the reference voltage
  • 16-bit auto-averaging accumulator with burst mode provides increased ADC resolution
  • Data dependent windowed interrupt generator
  • Built-in temperature sensor
  • Supports buttons, sliders, wheels, and capacitive proximity sensing
  • Fast 40 μs per channel conversion time
  • 16-bit resolution, up to 14 input channels
  • Auto scan and wake-on-touch
  • Auto-accumulate up to 64× samples
  • Programmable hysteresis and response time
  • Configurable as wake-up or reset source
  • Up to ±500 μA, can be used as a bias or for generating a custom reference voltage
  • PWM enhanced resolution mode
  • Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks
  • Up to 25 MIPS throughput with 25 MHz clock
  • Expanded interrupt handler
  • 512 bytes RAM
  • 8 kB (F990/1/6/7, F980/1/6/7), 4 kB (F982/3/8/9), or 2 kB (F985) Flash; in-system programmable
  • Up to 17 port I/O; high sink current and programmable drive strength
  • Hardware SMBus/I2C, SPI, and UART serial ports available concurrently
  • Four general purpose 16-bit counter/timers
  • Programmable 16-bit counter/timer array with three capture/compare modules and watchdog timer
  • Internal oscillators: 24.5 MHz, 2% accuracy supports UART operation; 20 MHz low power oscillator requires very little bias current
  • External oscillator: Crystal, RC, C, or CMOS Clock
  • SmaRTClock oscillator: 32 kHz Crystal or internal
  • Can switch between clock sources on-the-fly; useful in implementing various power saving modes
  • On-chip debug circuitry facilitates full-speed, nonintrusive in-system debug (no emulator required)
  • Provides breakpoints, single stepping
  • Inspect/modify memory and registers
  • Complete development kit
  • 20-pin QFN (3×3 mm)
  • 24-pin QFN (4×4 mm)
  • 24-pin QSOP (easy to hand-solder)
  • Temperature Range: -40 to +85 ℃