MaxLinear SP3485EN-L/TR
| Manufacturer | |
| MPN | SP3485EN-L/TR |
| LCSC Part # | C8963 |
| Packaging | SOIC-8 |
| Customer # | |
| Key Attributes | +3.3V Low Power Half-Duplex RS-485 Transceiver with 10Mbps Data Rate |
| Datasheet | MaxLinear SP3485EN-L/TR |
| RoHS Compliance | 1 documents available |
| Alternative Parts | 5 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MaxLinear | |
| Packaging | SOIC-8 | |
| Voltage - Supply | 3.3V | |
| Type | Transceiver | |
| Data Rate | 10Mbps | |
| Number of Nodes | 32 | |
| Operating Temperature | -40℃~+85℃ | |
| ESD Protect | - | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 1 | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 2mA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MaxLinear | |
| Packaging | SOIC-8 | |
| Voltage - Supply | 3.3V | |
| Type | Transceiver | |
| Data Rate | 10Mbps | |
| Number of Nodes | 32 |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+85℃ | |
| ESD Protect | - | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 1 | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 2mA |
Introduction
The SP3485 device is a +3.3V low power half- duplex transceiver that meets the specifications of the RS- 485 and RS- 422 serial protocols. This device is pin- to- pin compatible with the Exar SP481, SP483 and SP485 devices as well as popular industry standards. The SP3485 features the Exar BiCMOS process, allowing low power operation without sacrificing performance. The SP3485 can meet the electrical specifications of the RS- 485 and RS- 422 serial protocols up to 10Mbps under load.
Features
- RS-485 and RS-422 transceiver
- Single +3.3V supply
- Interoperable with +5.0V logic
- Driver/receiver enable
- Common-mode input voltage range: -7V to +12V
- Up to 32 transceivers on serial bus
- Pin-compatible with 75176 industry standard
- Driver output short-circuit protection
- Data rate 10Mbps
Applications
- RS-485 and RS-422 serial protocol communication
- Serial bus communication, supporting up to 32 transceivers on the bus
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MaxLinear | |
| Packaging | SOIC-8 | |
| Voltage - Supply | 3.3V | |
| Type | Transceiver | |
| Data Rate | 10Mbps | |
| Number of Nodes | 32 | |
| Operating Temperature | -40℃~+85℃ | |
| ESD Protect | - | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 1 | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 2mA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MaxLinear | |
| Packaging | SOIC-8 | |
| Voltage - Supply | 3.3V | |
| Type | Transceiver | |
| Data Rate | 10Mbps | |
| Number of Nodes | 32 |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+85℃ | |
| ESD Protect | - | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 1 | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 2mA |
Introduction
The SP3485 device is a +3.3V low power half- duplex transceiver that meets the specifications of the RS- 485 and RS- 422 serial protocols. This device is pin- to- pin compatible with the Exar SP481, SP483 and SP485 devices as well as popular industry standards. The SP3485 features the Exar BiCMOS process, allowing low power operation without sacrificing performance. The SP3485 can meet the electrical specifications of the RS- 485 and RS- 422 serial protocols up to 10Mbps under load.
Features
- RS-485 and RS-422 transceiver
- Single +3.3V supply
- Interoperable with +5.0V logic
- Driver/receiver enable
- Common-mode input voltage range: -7V to +12V
- Up to 32 transceivers on serial bus
- Pin-compatible with 75176 industry standard
- Driver output short-circuit protection
- Data rate 10Mbps
Applications
- RS-485 and RS-422 serial protocol communication
- Serial bus communication, supporting up to 32 transceivers on the bus
C8963 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



