MAXIM MAX6822TUK+T

The MAX6821–MAX6825 are low-voltage microprocessor (µP) supervisory circuits that combine voltage monitoring, watchdog timer, and manual reset input functions in a 5-pin SOT23 package. Microprocessor supervisory circuits significantly improve system reliability and accuracy compared to separate ICs or discrete components. These devices assert a reset signal whenever the monitored voltage drops below its preset threshold, keeping it asserted for a minimum timeout period after Vcc rises above the threshold. In addition, a watchdog timer monitors against code execution errors. A debounced manual reset is also available. The MAX6821–MAX6825 monitor voltages from +1.8V to +5.0V. These outputs are guaranteed to be in the correct state for VCC down to +1.0V. Nine preprogrammed reset threshold voltages are available. The MAX6821, MAX6822, and MAX6823 all have a manual reset input and a watchdog timer. The MAX6821 has push-pull RESET, the MAX6822 has open-drain RESET, and the MAX6823 has push-pull RESET. The MAX6824 has a watchdog timer and both push-pull RESET and push-pull RESET. The MAX6825 has a manual reset input and both push-pull RESET and push-pull RESET.

• Monitors +1.8V, +2.5V, +3.0V, +3.3V, +5.0V Supplies
• 140ms (min) Reset Timeout Delay
• 1.6s Watchdog Timeout Period (MAX6821/MAX6822/MAX6823/MAX6824)
• Manual Reset Input (MAX6821/MAX6822/MAX6823/MAX6825)
• Three Reset Output Options: Push-Pull RESET, Push-Pull RESET, Open-Drain RESET
• Guaranteed Reset Valid to VCC = +1.0V
• Immune to Short Negative VCC Transients
• No External Components
• Small 5-Pin SOT23 Packages

• Set-Top Boxes
• Intelligent Instruments
• Computers and Controllers
• Critical µP Monitoring
• Portable/Battery-Powered Equipment
• Embedded Controllers