TI UCC28251PWR
| Manufacturer | |
| MPN | UCC28251PWR |
| LCSC Part # | C702428 |
| Packaging | TSSOP-20 |
| Customer # | |
| Key Attributes | Advanced PWM Controller with Pre-Biased Operation |
| Datasheet | TI UCC28251PWR |
| RoHS Compliance | 2 documents available |
| Alternative Parts | 2 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/DC DC Switching Controllers | |
| Manufacturer | TI | |
| Packaging | TSSOP-20 | |
| Operating Temperature | -40℃~+150℃ | |
| Output Current | 200mA | |
| Features | Adjustable soft-start;Synchronous rectification drive;Leading edge blanking;Hiccup current limiting;Under-voltage lockout;Over Voltage Protection;Overtemperature protection (OTP);Over Current Protection;Under Voltage Protection | |
| Topology | Half-Bridge;Full-Bridge;Push-Pull | |
| Duty Cycle(Max) | - | |
| Feedback System | Primary-side feedback | |
| Operating Voltage | 4.7V~17V | |
| Frequency - Switching | 90kHz~106kHz | |
| Output Voltage | 3.25V |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/DC DC Switching Controllers | |
| Manufacturer | TI | |
| Packaging | TSSOP-20 | |
| Operating Temperature | -40℃~+150℃ | |
| Output Current | 200mA | |
| Features | Adjustable soft-start;Synchronous rectification drive;Leading edge blanking;Hiccup current limiting;Under-voltage lockout;Over Voltage Protection;Overtemperature protection (OTP);Over Current Protection;Under Voltage Protection |
| Type | Description | |
|---|---|---|
| Topology | Half-Bridge;Full-Bridge;Push-Pull | |
| Duty Cycle(Max) | - | |
| Feedback System | Primary-side feedback | |
| Operating Voltage | 4.7V~17V | |
| Frequency - Switching | 90kHz~106kHz | |
| Output Voltage | 3.25V |
Introduction
The UCC28251 PWM controller is designed for high power density applications with stringent pre-bias startup requirements. The UCC28251's integrated synchronous rectifier control outputs target high-efficiency, high-performance topologies such as half-bridge, full-bridge, interleaved forward, and push-pull. The UCC27210 half-bridge driver and UCC2752x MOSFET drivers used with the UCC28251 provide a complete power converter solution. The combination of an externally programmable soft-start with the internal pre-bias startup circuit allows the controller to gradually reach its steady-state operating point under all output conditions. The UCC28251 can be configured for primary- or secondary-side control and supports both voltage-mode and current-mode control. The oscillator operates at frequencies up to 1.8 MHz and can synchronize to an external clock. Input voltage feed-forward, cycle-by-cycle current limiting, and a programmable hiccup timer keep the system within a safe operating range. Input voltage, output voltage, and temperature protections are supported. Dead times between primary-side switches and secondary-side synchronous rectifiers can be set independently.
Features
- Pre-biased startup
- Synchronous rectifier control output with programmable delay (including zero-delay support)
- Voltage mode control or current mode control with input voltage feedforward
- Primary-side or secondary-side control
- 3.3V, 1.5% high-accuracy reference output
- Lower minimum operating frequency
- 1% high-accuracy cycle-by-cycle overcurrent protection with matched duty cycle outputs
- Programmable soft-start and hiccup restart timer
- Thermally enhanced 4mm × 4mm ultra-thin VQFN-20 package and 20-pin TSSOP package
Applications
- Half-bridge, full-bridge, interleaved forward, and push-pull isolated converters
- Telecom and data communication power supplies
- Wireless base station power supplies
- Server power supplies
- Industrial power systems
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/DC DC Switching Controllers | |
| Manufacturer | TI | |
| Packaging | TSSOP-20 | |
| Operating Temperature | -40℃~+150℃ | |
| Output Current | 200mA | |
| Features | Adjustable soft-start;Synchronous rectification drive;Leading edge blanking;Hiccup current limiting;Under-voltage lockout;Over Voltage Protection;Overtemperature protection (OTP);Over Current Protection;Under Voltage Protection | |
| Topology | Half-Bridge;Full-Bridge;Push-Pull | |
| Duty Cycle(Max) | - | |
| Feedback System | Primary-side feedback | |
| Operating Voltage | 4.7V~17V | |
| Frequency - Switching | 90kHz~106kHz | |
| Output Voltage | 3.25V |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/DC DC Switching Controllers | |
| Manufacturer | TI | |
| Packaging | TSSOP-20 | |
| Operating Temperature | -40℃~+150℃ | |
| Output Current | 200mA | |
| Features | Adjustable soft-start;Synchronous rectification drive;Leading edge blanking;Hiccup current limiting;Under-voltage lockout;Over Voltage Protection;Overtemperature protection (OTP);Over Current Protection;Under Voltage Protection |
| Type | Description | |
|---|---|---|
| Topology | Half-Bridge;Full-Bridge;Push-Pull | |
| Duty Cycle(Max) | - | |
| Feedback System | Primary-side feedback | |
| Operating Voltage | 4.7V~17V | |
| Frequency - Switching | 90kHz~106kHz | |
| Output Voltage | 3.25V |
Introduction
The UCC28251 PWM controller is designed for high power density applications with stringent pre-bias startup requirements. The UCC28251's integrated synchronous rectifier control outputs target high-efficiency, high-performance topologies such as half-bridge, full-bridge, interleaved forward, and push-pull. The UCC27210 half-bridge driver and UCC2752x MOSFET drivers used with the UCC28251 provide a complete power converter solution. The combination of an externally programmable soft-start with the internal pre-bias startup circuit allows the controller to gradually reach its steady-state operating point under all output conditions. The UCC28251 can be configured for primary- or secondary-side control and supports both voltage-mode and current-mode control. The oscillator operates at frequencies up to 1.8 MHz and can synchronize to an external clock. Input voltage feed-forward, cycle-by-cycle current limiting, and a programmable hiccup timer keep the system within a safe operating range. Input voltage, output voltage, and temperature protections are supported. Dead times between primary-side switches and secondary-side synchronous rectifiers can be set independently.
Features
- Pre-biased startup
- Synchronous rectifier control output with programmable delay (including zero-delay support)
- Voltage mode control or current mode control with input voltage feedforward
- Primary-side or secondary-side control
- 3.3V, 1.5% high-accuracy reference output
- Lower minimum operating frequency
- 1% high-accuracy cycle-by-cycle overcurrent protection with matched duty cycle outputs
- Programmable soft-start and hiccup restart timer
- Thermally enhanced 4mm × 4mm ultra-thin VQFN-20 package and 20-pin TSSOP package
Applications
- Half-bridge, full-bridge, interleaved forward, and push-pull isolated converters
- Telecom and data communication power supplies
- Wireless base station power supplies
- Server power supplies
- Industrial power systems
C702428 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



