ADI LTC486IN#PBF
| Manufacturer | |
| MPN | LTC486IN#PBF |
| LCSC Part # | C688609 |
| Packaging | PDIP-16 |
| Customer # | |
| Key Attributes | 4.75V~5.25V Driver 32 PDIP-16 Drivers, Receivers, Transceivers RoHS |
| Datasheet | ADI LTC486IN#PBF |
| RoHS Compliance | 1 documents available |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ADI | |
| Packaging | PDIP-16 | |
| Voltage - Supply | 4.75V~5.25V | |
| Type | Driver | |
| Number of Nodes | 32 | |
| Operating Temperature | -40℃~+85℃ | |
| ESD Protect | ±2kV | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 4 | |
| Features | Hot-swap protection;Thermal shutdown protection | |
| Number of Receivers | 0 | |
| Quiescent Supply Current | 110uA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ADI | |
| Packaging | PDIP-16 | |
| Voltage - Supply | 4.75V~5.25V | |
| Type | Driver | |
| Number of Nodes | 32 | |
| Operating Temperature | -40℃~+85℃ |
| Type | Description | |
|---|---|---|
| ESD Protect | ±2kV | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 4 | |
| Features | Hot-swap protection;Thermal shutdown protection | |
| Number of Receivers | 0 | |
| Quiescent Supply Current | 110uA |
Introduction
The LTC486 is a low power differential bus/line driver designed for multipoint data transmission standard RS485 applications with extended common - mode range (12V to -7V). It also meets RS422 requirements. The CMOS design offers significant power savings over its bipolar counterpart without sacrificing ruggedness against overload or ESD damage. The driver features three - state outputs, with the driver outputs maintaining high impedance over the entire common - mode range. Excessive power dissipation caused by bus contention or faults is prevented by a thermal shutdown circuit which forces the driver outputs into a high impedance state. Both AC and DC specifications are guaranteed from 0℃ to 70℃ (Commercial), -40℃ to 85℃ (Industrial), over the 4.75V to 5.25V supply voltage range.
Features
- Very Low Power: lCC = 110μA Typ
- Designed for RS485 or RS422 Applications
- Single 5V Supply
- –7V to 12V Bus Common - Mode Range Permits ±7V GND Difference Between Devices on the Bus
- Thermal Shutdown Protection
- Power - Up/Down Glitch - Free Driver Outputs Permit Live Insertion/Removal of Package
- Driver Maintains High Impedance in Three - State or with the Power Off
- 28ns Typical Driver Propagation Delays with 5ns Skew
- Pin Compatible with the SN75172, DS96172, μA96172, and DS96F172
Applications
- Low Power RS485/RS422 Drivers Level Translator
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 9.4337 | $ 9.43 |
| 200+ | $ 3.6504 | $ 730.08 |
| 500+ | $ 3.5222 | $ 1761.10 |
| 1,000+ | $ 3.459 | $ 3459.00 |
Standard Packaging25/Full Tube | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ADI | |
| Packaging | PDIP-16 | |
| Voltage - Supply | 4.75V~5.25V | |
| Type | Driver | |
| Number of Nodes | 32 | |
| Operating Temperature | -40℃~+85℃ | |
| ESD Protect | ±2kV | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 4 | |
| Features | Hot-swap protection;Thermal shutdown protection | |
| Number of Receivers | 0 | |
| Quiescent Supply Current | 110uA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ADI | |
| Packaging | PDIP-16 | |
| Voltage - Supply | 4.75V~5.25V | |
| Type | Driver | |
| Number of Nodes | 32 | |
| Operating Temperature | -40℃~+85℃ |
| Type | Description | |
|---|---|---|
| ESD Protect | ±2kV | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 4 | |
| Features | Hot-swap protection;Thermal shutdown protection | |
| Number of Receivers | 0 | |
| Quiescent Supply Current | 110uA |
Introduction
The LTC486 is a low power differential bus/line driver designed for multipoint data transmission standard RS485 applications with extended common - mode range (12V to -7V). It also meets RS422 requirements. The CMOS design offers significant power savings over its bipolar counterpart without sacrificing ruggedness against overload or ESD damage. The driver features three - state outputs, with the driver outputs maintaining high impedance over the entire common - mode range. Excessive power dissipation caused by bus contention or faults is prevented by a thermal shutdown circuit which forces the driver outputs into a high impedance state. Both AC and DC specifications are guaranteed from 0℃ to 70℃ (Commercial), -40℃ to 85℃ (Industrial), over the 4.75V to 5.25V supply voltage range.
Features
- Very Low Power: lCC = 110μA Typ
- Designed for RS485 or RS422 Applications
- Single 5V Supply
- –7V to 12V Bus Common - Mode Range Permits ±7V GND Difference Between Devices on the Bus
- Thermal Shutdown Protection
- Power - Up/Down Glitch - Free Driver Outputs Permit Live Insertion/Removal of Package
- Driver Maintains High Impedance in Three - State or with the Power Off
- 28ns Typical Driver Propagation Delays with 5ns Skew
- Pin Compatible with the SN75172, DS96172, μA96172, and DS96F172
Applications
- Low Power RS485/RS422 Drivers Level Translator
C688609 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |