ADI AD711AQ
| Manufacturer | |
| MPN | AD711AQ |
| LCSC Part # | C650577 |
| Packaging | CDIP-8 |
| Customer # | |
| Key Attributes | High Speed, Precision Monolithic Operational Amplifier |
| Datasheet |  ADI AD711AQ |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps | |
| Manufacturer | ADI | |
| Packaging | CDIP-8 | |
| Quiescent Current | 2.5mA | |
| Gain Bandwidth Product | 4MHz | |
| Vos - Input Offset Voltage | 300uV | |
| Slew Rate | 20V/us | |
| Input Offset Current(Ios) | 10pA | |
| Input Voltage Noise Density | 16nV/√Hz | |
| Operating Temperature | -40℃~+85℃ | |
| Features | ESD protection | |
| Common Mode Rejection Ratio(CMRR) | 88dB | |
| Ib - Input Bias Current | 15pA | |
| Output Current | 25mA | |
| Input Offset Voltage Drift(Vos TC) | 7uV/℃ |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 48 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The AD711 is a high speed, precision monolithic op amp that offers high performance at a very reasonable price. Its very low offset voltage and offset voltage drift are achieved through the use of advanced laser wafer trimming techniques. These performance advantages allow the user to easily upgrade designs currently using older precision BiFETs and, in many cases, bipolar op amps.
The excellent AC and DC performance of this amplifier makes it suitable for active filter applications. With a slew rate of 16 V/μs and a settling time of 1 ms to ±0.01%, the AD711 is an ideal choice for 12-bit D/A and A/D converter buffers and high speed integrators. Its settling time is superior to any comparable IC amplifier.
The combination of excellent noise performance and low input current also makes the AD711 suitable for photodiode preamplifier applications. A CMR of 88 dB and an open-loop gain of 400 V/mV ensure 12-bit performance even in high speed unity-gain buffer circuits.
The AD711 is available in the standard op amp pin configuration and in seven performance grades. The AD711J and AD711K are rated for operation over the 0°C to 70°C temperature range. The AD711A, AD711B, and AD711C are rated over the −40°C to +85°C range. The AD711S and AD711T are rated over the −40°C to +125°C range and can be processed to MIL-STD-883B REV. E.
Features
- Enhanced replacement for LF411 and TL081
- AC performance: settles to ±0.01% in 1.0 μs
- Minimum slew rate 16 V/μs (AD711J)
- Minimum unity-gain bandwidth 3 MHz (AD711J)
- DC performance: maximum offset voltage 0.25 mV (AD711C)
- Maximum drift 3 μV/°C (AD711C)
- Minimum open-loop gain 200 V/mV (AD711K)
- Maximum noise 4 μV p-p, 0.7 Hz to 70 Hz (AD711C)
- Available in plastic Mini-DIP, plastic SOIC, hermetic ceramic DIP, and hermetic metal can packages
- MIL-STD-883B compliant versions available
- EIA-481A compliant surface mount (SOIC) tape and reel packaging available
- Dual op amp version: AD712
Applications
- Buffer for 12-bit D/A and A/D converters
- High-speed integrator
- Photodiode preamplifier
- Active filter applications
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 10.5077$ 9.0367 | $ 9.04 |
| 10+ | $ 10.3693$ 8.9176 | $ 89.18 |
| 48+ | $ 10.1299$ 8.7118 | $ 418.17 |
| 96+ | $ 9.9198$ 8.5311 | $ 818.99 |
Standard Packaging48/Full Tube | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps | |
| Manufacturer | ADI | |
| Packaging | CDIP-8 | |
| Quiescent Current | 2.5mA | |
| Gain Bandwidth Product | 4MHz | |
| Vos - Input Offset Voltage | 300uV | |
| Slew Rate | 20V/us | |
| Input Offset Current(Ios) | 10pA | |
| Input Voltage Noise Density | 16nV/√Hz | |
| Operating Temperature | -40℃~+85℃ | |
| Features | ESD protection | |
| Common Mode Rejection Ratio(CMRR) | 88dB | |
| Ib - Input Bias Current | 15pA | |
| Output Current | 25mA | |
| Input Offset Voltage Drift(Vos TC) | 7uV/℃ |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 48 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The AD711 is a high speed, precision monolithic op amp that offers high performance at a very reasonable price. Its very low offset voltage and offset voltage drift are achieved through the use of advanced laser wafer trimming techniques. These performance advantages allow the user to easily upgrade designs currently using older precision BiFETs and, in many cases, bipolar op amps.
The excellent AC and DC performance of this amplifier makes it suitable for active filter applications. With a slew rate of 16 V/μs and a settling time of 1 ms to ±0.01%, the AD711 is an ideal choice for 12-bit D/A and A/D converter buffers and high speed integrators. Its settling time is superior to any comparable IC amplifier.
The combination of excellent noise performance and low input current also makes the AD711 suitable for photodiode preamplifier applications. A CMR of 88 dB and an open-loop gain of 400 V/mV ensure 12-bit performance even in high speed unity-gain buffer circuits.
The AD711 is available in the standard op amp pin configuration and in seven performance grades. The AD711J and AD711K are rated for operation over the 0°C to 70°C temperature range. The AD711A, AD711B, and AD711C are rated over the −40°C to +85°C range. The AD711S and AD711T are rated over the −40°C to +125°C range and can be processed to MIL-STD-883B REV. E.
Features
- Enhanced replacement for LF411 and TL081
- AC performance: settles to ±0.01% in 1.0 μs
- Minimum slew rate 16 V/μs (AD711J)
- Minimum unity-gain bandwidth 3 MHz (AD711J)
- DC performance: maximum offset voltage 0.25 mV (AD711C)
- Maximum drift 3 μV/°C (AD711C)
- Minimum open-loop gain 200 V/mV (AD711K)
- Maximum noise 4 μV p-p, 0.7 Hz to 70 Hz (AD711C)
- Available in plastic Mini-DIP, plastic SOIC, hermetic ceramic DIP, and hermetic metal can packages
- MIL-STD-883B compliant versions available
- EIA-481A compliant surface mount (SOIC) tape and reel packaging available
- Dual op amp version: AD712
Applications
- Buffer for 12-bit D/A and A/D converters
- High-speed integrator
- Photodiode preamplifier
- Active filter applications
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |