- Pinout
- Footprint
onsemi NBC12430AMNG
| Manufacturer | |
| MPN | NBC12430AMNG |
| LCSC Part # | C603409 |
| Packaging | QFN-32-EP(5x5) |
| Customer # | |
| Key Attributes | 800MHz 3.135V~5.25V Three-Wire Interface PECL 1 QFN-32-EP(5x5) Clock Generators, PLLs, Frequency Synthesizers RoHS |
| Datasheet | onsemi NBC12430AMNG |
| RoHS Compliance | 4 documents available |
| Alternative Parts | 1 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Clock/Timing/Clock Generators, PLLs, Frequency Synthesizers | |
| Manufacturer | onsemi | |
| Packaging | QFN-32-EP(5x5) | |
| Operating Temperature | -40℃~+85℃ | |
| Clock/Oscillator | External | |
| Output Frequency(Max) | 800MHz | |
| Voltage - Supply | 3.135V~5.25V | |
| Phase Offset | Not supported | |
| Period Jitter, Peak-to-Peak | 85ps;- | |
| Interface | Three-Wire Interface | |
| Features | - | |
| Input | LVCMOS;LVTTL | |
| Output Level | PECL | |
| Phase Jitter | - | |
| Number of Outputs | 1 |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Clock/Timing/Clock Generators, PLLs, Frequency Synthesizers | |
| Manufacturer | onsemi | |
| Packaging | QFN-32-EP(5x5) | |
| Operating Temperature | -40℃~+85℃ | |
| Clock/Oscillator | External | |
| Output Frequency(Max) | 800MHz | |
| Voltage - Supply | 3.135V~5.25V | |
| Phase Offset | Not supported |
| Type | Description | |
|---|---|---|
| Period Jitter, Peak-to-Peak | 85ps;- | |
| Interface | Three-Wire Interface | |
| Features | - | |
| Input | LVCMOS;LVTTL | |
| Output Level | PECL | |
| Phase Jitter | - | |
| Number of Outputs | 1 |
Introduction
The NBC12430 and NBC12430A are general purpose, PLL based synthesized clock sources. The VCO will operate over a frequency range of 400 MHz to 800 MHz. The VCO frequency is sent to the N−output divider, where it can be configured to provide division ratios of 1, 2, 4, or 8. The VCO and output frequency can be programmed using the parallel or serial interfaces to the configuration logic. Output frequency steps of 250 kHz, 500 kHz, 1.0 MHz, 2.0 MHz can be achieved using a 16 MHz crystal, depending on the output dividers settings. The PLL loop filter is fully integrated and does not require any external components.
Features
- Best−in−Class Output Jitter Performance, ±20 ps Peak−to−Peak
- 50 MHz to 800 MHz Programmable Differential PECL Outputs
- Fully Integrated Phase−Lock−Loop with Internal Loop Filter
- Parallel Interface for Programming Counter and Output Dividers During Powerup
- Minimal Frequency Overshoot
- Serial 3−Wire Programming Interface
- Crystal Oscillator Interface
- Operating Range: VCC = 3.135 V to 5.25 V
- CMOS and TTL Compatible Control Inputs
- Pin and Function Compatible with Motorola MC12430 and MPC9230
- 0°C to 70°C Ambient Operating Temperature (NBC12430)
- -40°C to 85°C Ambient Operating Temperature (NBC12430A)
- Pb−Free Packages are Available
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Clock/Timing/Clock Generators, PLLs, Frequency Synthesizers | |
| Manufacturer | onsemi | |
| Packaging | QFN-32-EP(5x5) | |
| Operating Temperature | -40℃~+85℃ | |
| Clock/Oscillator | External | |
| Output Frequency(Max) | 800MHz | |
| Voltage - Supply | 3.135V~5.25V | |
| Phase Offset | Not supported | |
| Period Jitter, Peak-to-Peak | 85ps;- | |
| Interface | Three-Wire Interface | |
| Features | - | |
| Input | LVCMOS;LVTTL | |
| Output Level | PECL | |
| Phase Jitter | - | |
| Number of Outputs | 1 |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Clock/Timing/Clock Generators, PLLs, Frequency Synthesizers | |
| Manufacturer | onsemi | |
| Packaging | QFN-32-EP(5x5) | |
| Operating Temperature | -40℃~+85℃ | |
| Clock/Oscillator | External | |
| Output Frequency(Max) | 800MHz | |
| Voltage - Supply | 3.135V~5.25V | |
| Phase Offset | Not supported |
| Type | Description | |
|---|---|---|
| Period Jitter, Peak-to-Peak | 85ps;- | |
| Interface | Three-Wire Interface | |
| Features | - | |
| Input | LVCMOS;LVTTL | |
| Output Level | PECL | |
| Phase Jitter | - | |
| Number of Outputs | 1 |
Introduction
The NBC12430 and NBC12430A are general purpose, PLL based synthesized clock sources. The VCO will operate over a frequency range of 400 MHz to 800 MHz. The VCO frequency is sent to the N−output divider, where it can be configured to provide division ratios of 1, 2, 4, or 8. The VCO and output frequency can be programmed using the parallel or serial interfaces to the configuration logic. Output frequency steps of 250 kHz, 500 kHz, 1.0 MHz, 2.0 MHz can be achieved using a 16 MHz crystal, depending on the output dividers settings. The PLL loop filter is fully integrated and does not require any external components.
Features
- Best−in−Class Output Jitter Performance, ±20 ps Peak−to−Peak
- 50 MHz to 800 MHz Programmable Differential PECL Outputs
- Fully Integrated Phase−Lock−Loop with Internal Loop Filter
- Parallel Interface for Programming Counter and Output Dividers During Powerup
- Minimal Frequency Overshoot
- Serial 3−Wire Programming Interface
- Crystal Oscillator Interface
- Operating Range: VCC = 3.135 V to 5.25 V
- CMOS and TTL Compatible Control Inputs
- Pin and Function Compatible with Motorola MC12430 and MPC9230
- 0°C to 70°C Ambient Operating Temperature (NBC12430)
- -40°C to 85°C Ambient Operating Temperature (NBC12430A)
- Pb−Free Packages are Available
C603409 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |