TI TLC2543IDWR

The TLC2543C and TLC2543I are 12-bit, switched-capacitor, successive-approximation, analog-to-digital converters. Each device, with three control inputs [chip select (CS), the input-output clock, and the address input (DATA INPUT)], is designed for communication with the serial port of a host processor or peripheral through a serial 3-state output. The device allows high-speed data transfers from the host. In addition to the high-speed converter and versatile control capability, the device has an on-chip 14-channel multiplexer that can select any one of 11 inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range. The TLC2543C is characterized for operation from TA = 0°C to 70°C. The TLC2543I is characterized for operation from TA = -40°C to 85°C. The TLC2543M is characterized for operation from TA = -55°C to 125°C.

• 12-Bit-Resolution A/D Converter
• 10-μs Conversion Time Over Operating Temperature
• 11 Analog Input Channels
• 3 Built-In Self-Test Modes
• Inherent Sample-and-Hold Function
• Linearity Error... ± 1 LSB Max
• On-Chip System Clock
• End-of-Conversion Output
• Unipolar or Bipolar Output Operation (Signed Binary With Respect to 1/2 the Applied Voltage Reference)
• Programmable MSB or LSB First
• Programmable Power Down
• Programmable Output Data Length
• CMOS Technology