TI SN74LVT245BDBR
| Manufacturer | |
| MPN | SN74LVT245BDBR |
| LCSC Part # | C543012 |
| Packaging | SSOP-20-208mil |
| Customer # | |
| Key Attributes | 3.3-V A-B Octal Bus Transceiver with 3-State Outputs |
| Datasheet | TI SN74LVT245BDBR |
| RoHS Compliance | 2 documents available |
| Alternative Parts | 5 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Buffers, Drivers, Receivers, Transceivers | |
| Manufacturer | TI | |
| Packaging | SSOP-20-208mil | |
| Input type | - | |
| Voltage - Supply | 2.7V~3.6V | |
| Output Type | Tri-State | |
| Operating Temperature | -40℃~+85℃ | |
| Quiescent Supply Current | 190uA | |
| Function | Power-off isolation;Output enable;Hot-swap support;Level shifting | |
| Current - Output High(IOH) | 32mA | |
| Series | 74LVT | |
| Current - Output Low(IOL) | 64mA | |
| Number of Bits per Element | 8 | |
| Channel Type | Bidirectional | |
| Number of Elements | 1 | |
| Propagation Delay | 2.3ns@3.3V,50pF |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Buffers, Drivers, Receivers, Transceivers | |
| Manufacturer | TI | |
| Packaging | SSOP-20-208mil | |
| Input type | - | |
| Voltage - Supply | 2.7V~3.6V | |
| Output Type | Tri-State | |
| Operating Temperature | -40℃~+85℃ | |
| Quiescent Supply Current | 190uA |
| Type | Description | |
|---|---|---|
| Function | Power-off isolation;Output enable;Hot-swap support;Level shifting | |
| Current - Output High(IOH) | 32mA | |
| Series | 74LVT | |
| Current - Output Low(IOL) | 64mA | |
| Number of Bits per Element | 8 | |
| Channel Type | Bidirectional | |
| Number of Elements | 1 | |
| Propagation Delay | 2.3ns@3.3V,50pF |
Introduction
This octal bus transceiver is designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. The SN74LVT245B is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE(overline) should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for hot-insertion applications using I(off) and power-up 3-state. The I(0P) circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
Features
- Mixed-mode signal operation support; 5V I/O voltage compatible at 3.3V VCC
- Unregulated battery supply support; minimum operating voltage down to 2.7V
- Typical output ground bounce <0.8V at VCC=3.3V, TA=25℃
- Ioff and power-up 3-state features for hot insertion support
- Latch-up performance exceeds 100mA per JESD 78 Class II
- ESD protection exceeds JESD 22: 2000-V HBM (A114-A), 200-V MM (A115-A), 1000-V CDM (C101)
- Data transfer direction (A-to-B or B-to-A) controlled by DIR input logic level
- Device disabled via OE input for effective bus isolation
- To ensure high-impedance state during power-up/power-down, OE should be connected to VCC through a pull-up resistor; minimum resistance determined by driver sink current capability
- Ioff circuitry disables outputs when device is powered off, preventing destructive backflow current
- Power-up 3-state circuitry places outputs in high-impedance state during power-up and power-down to avoid drive conflicts
- Absolute maximum ratings: supply voltage -0.5V~4.6V, input voltage -0.5V~7V, output voltage in high-impedance or power-off state -0.5V~7V, output voltage in high state -0.5V~VCC+0.5V, output/input current in low state 128mA, output/input current in high state 64mA, output clamp current -50mA
- Thermal resistance by package: DB 70℃/W, DW 58℃/W, GQN/ZQN 78℃/W, NS 60℃/W, PW 83℃/W, RGY 37℃/W
- Storage temperature range: -65℃~150℃
- All unused inputs must be tied to VCC or GND for proper device operation
Applications
- Asynchronous communication between data buses
- Hot-plug applications
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Buffers, Drivers, Receivers, Transceivers | |
| Manufacturer | TI | |
| Packaging | SSOP-20-208mil | |
| Input type | - | |
| Voltage - Supply | 2.7V~3.6V | |
| Output Type | Tri-State | |
| Operating Temperature | -40℃~+85℃ | |
| Quiescent Supply Current | 190uA | |
| Function | Power-off isolation;Output enable;Hot-swap support;Level shifting | |
| Current - Output High(IOH) | 32mA | |
| Series | 74LVT | |
| Current - Output Low(IOL) | 64mA | |
| Number of Bits per Element | 8 | |
| Channel Type | Bidirectional | |
| Number of Elements | 1 | |
| Propagation Delay | 2.3ns@3.3V,50pF |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Buffers, Drivers, Receivers, Transceivers | |
| Manufacturer | TI | |
| Packaging | SSOP-20-208mil | |
| Input type | - | |
| Voltage - Supply | 2.7V~3.6V | |
| Output Type | Tri-State | |
| Operating Temperature | -40℃~+85℃ | |
| Quiescent Supply Current | 190uA |
| Type | Description | |
|---|---|---|
| Function | Power-off isolation;Output enable;Hot-swap support;Level shifting | |
| Current - Output High(IOH) | 32mA | |
| Series | 74LVT | |
| Current - Output Low(IOL) | 64mA | |
| Number of Bits per Element | 8 | |
| Channel Type | Bidirectional | |
| Number of Elements | 1 | |
| Propagation Delay | 2.3ns@3.3V,50pF |
Introduction
This octal bus transceiver is designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. The SN74LVT245B is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE(overline) should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for hot-insertion applications using I(off) and power-up 3-state. The I(0P) circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
Features
- Mixed-mode signal operation support; 5V I/O voltage compatible at 3.3V VCC
- Unregulated battery supply support; minimum operating voltage down to 2.7V
- Typical output ground bounce <0.8V at VCC=3.3V, TA=25℃
- Ioff and power-up 3-state features for hot insertion support
- Latch-up performance exceeds 100mA per JESD 78 Class II
- ESD protection exceeds JESD 22: 2000-V HBM (A114-A), 200-V MM (A115-A), 1000-V CDM (C101)
- Data transfer direction (A-to-B or B-to-A) controlled by DIR input logic level
- Device disabled via OE input for effective bus isolation
- To ensure high-impedance state during power-up/power-down, OE should be connected to VCC through a pull-up resistor; minimum resistance determined by driver sink current capability
- Ioff circuitry disables outputs when device is powered off, preventing destructive backflow current
- Power-up 3-state circuitry places outputs in high-impedance state during power-up and power-down to avoid drive conflicts
- Absolute maximum ratings: supply voltage -0.5V~4.6V, input voltage -0.5V~7V, output voltage in high-impedance or power-off state -0.5V~7V, output voltage in high state -0.5V~VCC+0.5V, output/input current in low state 128mA, output/input current in high state 64mA, output clamp current -50mA
- Thermal resistance by package: DB 70℃/W, DW 58℃/W, GQN/ZQN 78℃/W, NS 60℃/W, PW 83℃/W, RGY 37℃/W
- Storage temperature range: -65℃~150℃
- All unused inputs must be tied to VCC or GND for proper device operation
Applications
- Asynchronous communication between data buses
- Hot-plug applications
C543012 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |

