LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

Forsinve FSV9531

Manufacturer
ForsinveAsian Brands
MPN
FSV9531
LCSC Part #
C5336465
Packaging
SOIC-32_300mil
Customer #
Key Attributes
ISO/IEC 14443 A/B Reader IC
DatasheetForsinve FSV9531
RoHS Compliance2 documents available
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryRF and Wireless/RFID, RF Access, Monitoring ICs
ManufacturerForsinve
PackagingSOIC-32_300mil
transmission rate-
FeaturesBuilt-in antenna driver;Built-in encryption;Built-in non-volatile memory;Data verification;Low power wake-up
Voltage - Supply3V~5.5V
Frequency13.56MHz
agreementISO 14443A,ISO 14443B,MIFARE
InterfaceSPI

Introduction

AI Translation

The FSV9531 is a highly integrated reader IC for contactless communication at 13.56 MHz. The FSV9531 reader IC provides: • outstanding modulation and demodulation for passive contactless communication • a wide range of methods and protocols • a small, fully integrated package • pin compatibility with the FSV9505 and FSV9504

All protocol layers of the ISO/IEC 14443 A and ISO/IEC 14443 B communication standards are supported provided: additional components, such as the oscillator, power supply, coil etc. are correctly applied. standardized protocols, such as ISO/IEC 14443-4 and/or ISO/IEC 14443 B anticollision are correctly implemented

The FSV9531 supports contactless communication using MIFARE higher baud rates (see Section 9.12 on page 38). The receiver module provides a robust and efficient demodulation/decoding circuitry implementation for compatible transponder signals (see Section 9.10 on page 32).

The digital module, manages the complete ISO/IEC 14443 standard framing and error detection (parity and CRC). In addition, it supports the fast MIFARE security algorithm for authenticating the MIFARE products (see Section 9.14 on page 40).

The internal transmitter module (Section 9.9 on page 29) can directly drive an antenna designed for a proximity operating distance up to 100 mm without any additional active circuitry.

A parallel interface can be directly connected to any 8-bit microprocessor to ensure reader/terminal design flexibility. In addition, Serial Peripheral Interface (SPI) compatibility is supported (see Section 9.1.4 on page 9).

Features

AI Translation
  • Highly integrated analog circuitry for demodulating and decoding card/label response
  • Buffered output drivers enable antenna connection using the minimum of external components
  • Proximity operating distance up to 100 mm
  • Supports both ISO/IEC 14443 A and ISO/IEC 14443 B standards
  • Supports the MIFARE Mini, MIFARE 1K, MIFARE 4K protocols
  • Contactless communication at MIFARE higher baud rates (up to 424 kBd)
  • Crypto1 and secure non-volatile internal key memory
  • Pin-compatible with the FSV9505 and the FSV9504
  • Parallel microprocessor interface with internal address latch and IRQ line
  • SPI compatibility
  • Flexible interrupt handling
  • Automatic detection of parallel microprocessor interface type
  • 64-byte send and receive FIFO buffer
  • Hard reset with low power function
  • Software controlled Power-down mode
  • Programmable timer
  • Unique serial number
  • User programmable start-up configuration
  • Bit-oriented and byte oriented framing
  • Independent power supply pins for analog, digital and transmitter modules
  • Internal oscillator buffer optimized for low phase jitter enables 13.56 MHz quartz connection
  • Clock frequency filtering
  • 3.3 V to 5 V operation for transmitter in short range and proximity applications
  • 3.3 V or 5 V operation for the digital module

Applications

AI Translation
  • Electronic payment systems
  • Identification systems
  • Access control systems
  • Subscriber services
  • Banking systems
  • Digital content systems