- Pinout
- Footprint
ElecSuper MAX3485EESA+T(ES)
| Manufacturer | ElecSuperAsian Brands |
| MPN | MAX3485EESA+T(ES) |
| LCSC Part # | C41438285 |
| Packaging | SOP-8 |
| Customer # | |
| Key Attributes | MAX3485EESA+T RS-485/RS422 Transceiver |
| Datasheet | ElecSuper MAX3485EESA+T(ES) |
| RoHS Compliance | 1 documents available |
| Alternative Parts | 5 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ElecSuper | |
| Packaging | SOP-8 | |
| Voltage - Supply | 3V~5.5V | |
| Type | Transceiver | |
| Data Rate | 14Mbps | |
| Operating Temperature | -40℃~+125℃ | |
| Number of Nodes | 256 | |
| ESD Protect | ±15kV | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 1 | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection;Low-power mode | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 270uA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ElecSuper | |
| Packaging | SOP-8 | |
| Voltage - Supply | 3V~5.5V | |
| Type | Transceiver | |
| Data Rate | 14Mbps | |
| Operating Temperature | -40℃~+125℃ |
| Type | Description | |
|---|---|---|
| Number of Nodes | 256 | |
| ESD Protect | ±15kV | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 1 | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection;Low-power mode | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 270uA |
Introduction
MAX3485EE SA+T is a RS-485 transceiver operating from a 3.0V~5.5V wide supply voltage, with bus port ESD protection up to 15kV (HBM), ±15V bus fault protection, half-duplex, low-power operation, and full compliance with TIA/EIA-485 standard requirements. It includes one driver and one receiver, each independently enable/disable controlled. When both are disabled, the driver and receiver outputs enter a high-impedance state. With 1/8 unit load, up to 256 MAX3485EESA+T transceivers can be connected in parallel on the same communication bus. Error-free data transmission at up to 14Mbps is supported. Operating voltage is 3.3V, with fail-safe, current-limiting protection, and overvoltage protection features.
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ElecSuper | |
| Packaging | SOP-8 | |
| Voltage - Supply | 3V~5.5V | |
| Type | Transceiver | |
| Data Rate | 14Mbps | |
| Operating Temperature | -40℃~+125℃ | |
| Number of Nodes | 256 | |
| ESD Protect | ±15kV | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 1 | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection;Low-power mode | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 270uA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ElecSuper | |
| Packaging | SOP-8 | |
| Voltage - Supply | 3V~5.5V | |
| Type | Transceiver | |
| Data Rate | 14Mbps | |
| Operating Temperature | -40℃~+125℃ |
| Type | Description | |
|---|---|---|
| Number of Nodes | 256 | |
| ESD Protect | ±15kV | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 1 | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection;Low-power mode | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 270uA |
Introduction
MAX3485EE SA+T is a RS-485 transceiver operating from a 3.0V~5.5V wide supply voltage, with bus port ESD protection up to 15kV (HBM), ±15V bus fault protection, half-duplex, low-power operation, and full compliance with TIA/EIA-485 standard requirements. It includes one driver and one receiver, each independently enable/disable controlled. When both are disabled, the driver and receiver outputs enter a high-impedance state. With 1/8 unit load, up to 256 MAX3485EESA+T transceivers can be connected in parallel on the same communication bus. Error-free data transmission at up to 14Mbps is supported. Operating voltage is 3.3V, with fail-safe, current-limiting protection, and overvoltage protection features.
C41438285 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS Compliant |
| ECCN | - |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS Compliant |
| ECCN | - |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |