LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

TI CD74FCT16374ATMT

Manufacturer
MPN
CD74FCT16374ATMT
LCSC Part #
C3826425
Packaging
TSSOP-48
Customer #
Key Attributes
4.5V~5.5V 8 2 6.5ns@5V,50pF TSSOP-48 Flip Flops
DatasheetTI CD74FCT16374ATMT
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Logic/Flip Flops
ManufacturerTI
PackagingTSSOP-48
Voltage - Supply4.5V~5.5V
Number of Bits per Element8
Output TypeTri-State
Operating Temperature-40℃~+85℃
SeriesCD74FCT
Synchronous/Asynchronous-
Number of Elements2
Current - Output High(IOH)32mA
Current - Output Low(IOL)64mA
Setup Time-
Quiescent Current500uA
Hold Time-
Propagation Delay6.5ns@5V,50pF
Trigger TypeRising Edge

Introduction

AI Translation

These devices are 16-bit octal registers built with sixteen D-type flip-flops, featuring a buffered common clock and three-state outputs. The output enable (xOE) and clock (xCLK) controls can be configured as two 8-bit registers or one 16-bit register. When OE is high, the outputs are in a high-impedance state. Input data meeting the D input setup and hold time requirements is transferred to the Q outputs on the low-to-high transition of the clock input. The CD74FCT16374T output buffers feature a power-off disable function, allowing boards to be "hot inserted" when used as backplane drivers. The CD74FCT162374T features ±24mA balanced output drivers. The outputs incorporate current-limiting resistors to control output edge rates, thereby reducing ground bounce and undershoot. For most interface applications, this eliminates the need for external termination resistors. The CD74FCT162H374T features a "bus-hold" function that retains the last input state when the input goes to high impedance, preventing "floating" inputs and eliminating the need for pull-up and pull-down resistors.

Features

AI Translation
  • Advanced 0.6-micron CMOS technology — high-speed, low-power devices with high current drive capability
  • Supply voltage VCC = 5V ± 10%
  • Hysteresis on all inputs
  • High output drive: Ioh = -32mA; Iol = 64mA
  • Power-off disable outputs allow "live insertion"; typical output ground bounce VOLP < 1.0V at VCC = 5V, Ta = 25°C
  • Balanced output drivers: ±24mA
  • Reduced system switching noise; typical output ground bounce VOLP < 0.6V at VCC = 5V, Ta = 25°C
  • Bus-hold retains last active bus state during three-state
  • No external pull-up resistors required