LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

TI CD74FCT16827ATSM

Manufacturer
MPN
CD74FCT16827ATSM
LCSC Part #
C3757078
Packaging
SSOP-56
Customer #
Key Attributes
Schmitt trigger 4.5V~5.5V 10 2 SSOP-56 Buffers, Drivers, Receivers, Transceivers
DatasheetTI CD74FCT16827ATSM
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Logic/Buffers, Drivers, Receivers, Transceivers
ManufacturerTI
PackagingSSOP-56
Input typeSchmitt trigger
Voltage - Supply4.5V~5.5V
Output TypeTri-State
Operating Temperature-40℃~+85℃
Quiescent Supply Current500uA
FunctionPower-off isolation;Output enable
Current - Output High(IOH)32mA
SeriesCD74FCT
Current - Output Low(IOL)64mA
Number of Bits per Element10
Channel Type-
Number of Elements2
Propagation Delay8ns@5V,50pF;15ns@5V,300pF

Introduction

AI Translation

These devices are 20-bit wide bus drivers designed to provide buffering and high-performance bus interfaces for wide data/address paths or buses with parity. Two pairs of NAND output enable controls allow the devices to operate as two 10-bit buffers or one 20-bit buffer. Signal pins feature a flow-through layout for ease of routing, and all inputs incorporate hysteresis to improve noise immunity. The CD74FCT16827T output buffers feature a power-off disable function, allowing boards to be "hot-swapped" when the device is used as a backplane driver. The CD74FCT162827T features ±24mA balanced output drivers. The outputs incorporate current-limiting resistors to control the output edge rate, thereby reducing ground bounce and undershoot. For most interface applications, this eliminates the need for external termination resistors. The CD74FCT162H827T features a "bus-hold" function that retains the last state of the input whenever the input becomes high-impedance, preventing inputs from "floating" and eliminating the need for pull-up and pull-down resistors.

Features

AI Translation
  • Advanced 0.6-micron CMOS technology — high-speed, low-power, high-current drive capability
  • Supply voltage VCC = 5V ± 10%
  • Hysteresis on all inputs
  • CD74FCT16827T: High output drive, Ioh = -32mA, Iol = 64mA
  • Power-off disable outputs allow "live insertion"; typical output ground bounce Volp < 1.0V at VCC = 5V, Ta = 25°C
  • CD74FCT162827T: Balanced output drivers, ±24mA
  • Reduced system switching noise; typical output ground bounce Volp < 0.6V at VCC = 5V, Ta = 25°C
  • CD74FCT162H827T: Bus-hold retains last valid bus state during three-state
  • No external pull-up resistors required