LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

TI CD74LPT16952ASM

Manufacturer
MPN
CD74LPT16952ASM
LCSC Part #
C3587102
Packaging
SSOP-56
Customer #
Key Attributes
Schmitt trigger 2.7V~3.6V 8 2 10ns@3.3V,50pF SSOP-56 Buffers, Drivers, Receivers, Transceivers
DatasheetTI CD74LPT16952ASM
Alternative Parts1
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Logic/Buffers, Drivers, Receivers, Transceivers
ManufacturerTI
PackagingSSOP-56
Input typeSchmitt trigger
Voltage - Supply2.7V~3.6V
Output TypeTri-State
Operating Temperature-40℃~+85℃
Quiescent Supply Current10uA
FunctionPower-off isolation;Output enable;Level shifting
Current - Output High(IOH)110mA
SeriesCD74LPT
Current - Output Low(IOL)200mA
Number of Bits per Element8
Channel TypeBidirectional
Number of Elements2
Propagation Delay10ns@3.3V,50pF

Introduction

AI Translation

Harris's CD74LPT16952 is manufactured using advanced 0.6-micron CMOS technology, achieving industry-leading speed grades.

The CD74LPT16952 is a 16-bit registered transceiver consisting of two groups of eight D-type latches, each with independent input and output controls. For example, for data flow from A to B, the A-to-B enable (xCEAB) input must be low to accept data from the xA inputs. When xCLKAB transitions from low to high, the data on Port A is latched into the B registers. xOEAB controls the output enable function on Port B. Data control from B to A is similar, but uses the xCEAB, xCLKAB, and xOEAB inputs. Full 16-bit operation is achieved by tying the control pins of the two individual transceivers together. The output buffers feature a power-off disable function, which allows boards to be "hot-inserted" when used as backplane drivers.

The CD74LPT16952 can be driven by 3.3V or 5.0V devices, enabling the device to be used as a translator in mixed 3.3/5.0V systems.

Features

AI Translation
  • Compatible with LCX series products
  • Supports 5V tolerant mixed-voltage operation — inputs accept 3V or 5V, outputs drive 3V or connect to 5V bus
  • Advanced low-power CMOS operation
  • Excellent output drive capability: balanced drive (24mA sink and source)
  • Pin-compatible with industry-standard dual-density pinout
  • Low ground bounce output
  • Hysteresis on all inputs
  • Multiple center pins and distributed VCC/GND pins for minimized switching noise