Infineon TLE75004ELDXUMA1
| Manufacturer | |
| MPN | TLE75004ELDXUMA1 |
| LCSC Part # | C3220043 |
| Packaging | - |
| Customer # | |
| Key Attributes | 4 Active High Low Side Switch Power Distribution Switches, Load Drivers |
| Datasheet | Infineon TLE75004ELDXUMA1 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | Infineon | |
| Packaging | - | |
| Operating Temperature | -40℃~+150℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage Protection;Under-voltage lockout;Reverse voltage protection;Latch protection | |
| number of channels | 4 | |
| Maximum Continuous Current | - | |
| Control Input Logic | Active High | |
| RDS(on) | 2.2Ω | |
| Operating Voltage | 3V~28V | |
| Type | Low Side Switch |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | Infineon | |
| Packaging | - | |
| Operating Temperature | -40℃~+150℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage Protection;Under-voltage lockout;Reverse voltage protection;Latch protection | |
| number of channels | 4 |
| Type | Description | |
|---|---|---|
| Maximum Continuous Current | - | |
| Control Input Logic | Active High | |
| RDS(on) | 2.2Ω | |
| Operating Voltage | 3V~28V | |
| Type | Low Side Switch |
Introduction
The TLE75004-ELD is a four channel low-side power switch in PG-SSOP-14-5 package providing embedded protective functions. It is specially designed to control relays and LEDs in automotive and industrial applications. A serial peripheral interface (SPI) is utilized for control and diagnosis of the loads as well as of the device. For direct control and PWM there are two input pins available connected to two outputs by default. Additional or different outputs can be controlled by the same input pins (programmable via SPI).
Features
- 16-bit serial peripheral interface for control and diagnosis
- Daisy Chain capability
- SPI also compatible with 8-bit SPI devices
- 2 CMOS compatible parallel input pins with Input Mapping functionality
- Cranking capability down to Vs = 3.0 V (supports LV124)
- Digital supply voltage range compatible with 3.3 V and 5 V microcontrollers
- Very low quiescent current (with usage of IDLE pin)
- Limp Home mode (with usage of IDLE and IN pins)
- Green Product (RoHS compliant)
- AEC Qualified
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | Infineon | |
| Packaging | - | |
| Operating Temperature | -40℃~+150℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage Protection;Under-voltage lockout;Reverse voltage protection;Latch protection | |
| number of channels | 4 | |
| Maximum Continuous Current | - | |
| Control Input Logic | Active High | |
| RDS(on) | 2.2Ω | |
| Operating Voltage | 3V~28V | |
| Type | Low Side Switch |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | Infineon | |
| Packaging | - | |
| Operating Temperature | -40℃~+150℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage Protection;Under-voltage lockout;Reverse voltage protection;Latch protection | |
| number of channels | 4 |
| Type | Description | |
|---|---|---|
| Maximum Continuous Current | - | |
| Control Input Logic | Active High | |
| RDS(on) | 2.2Ω | |
| Operating Voltage | 3V~28V | |
| Type | Low Side Switch |
Introduction
The TLE75004-ELD is a four channel low-side power switch in PG-SSOP-14-5 package providing embedded protective functions. It is specially designed to control relays and LEDs in automotive and industrial applications. A serial peripheral interface (SPI) is utilized for control and diagnosis of the loads as well as of the device. For direct control and PWM there are two input pins available connected to two outputs by default. Additional or different outputs can be controlled by the same input pins (programmable via SPI).
Features
- 16-bit serial peripheral interface for control and diagnosis
- Daisy Chain capability
- SPI also compatible with 8-bit SPI devices
- 2 CMOS compatible parallel input pins with Input Mapping functionality
- Cranking capability down to Vs = 3.0 V (supports LV124)
- Digital supply voltage range compatible with 3.3 V and 5 V microcontrollers
- Very low quiescent current (with usage of IDLE pin)
- Limp Home mode (with usage of IDLE and IN pins)
- Green Product (RoHS compliant)
- AEC Qualified
C3220043 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |
| Type | Details |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| Type | Details |
|---|---|
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |