LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

DIODES PI7C9X794FCEX

Manufacturer
MPN
PI7C9X794FCEX
LCSC Part #
C2678029
Packaging
LQFP-64(10x10)
Customer #
Key Attributes
LQFP-64(10x10) Controllers RoHS
DatasheetDIODES PI7C9X794FCEX
RoHS Compliance4 documents available
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Interface/Controllers
ManufacturerDIODES
PackagingLQFP-64(10x10)
FeaturesHardware flow control support;Software flow control support;Automatic RS-485 direction control;Low-power mode;Soft reset
Voltage - Supply1.62V~3.6V

Introduction

AI Translation

The PI7C9X794 (794), is a 1.62V to 3.6V Quad Universal Asynchronous Receiver and Transmitter (UART) with 5V tolerant serial (modem) inputs. The highly integrated device is designed for high bandwidth requirement in communication systems. The global interrupt source register provides a complete interrupt status indication for all 8 channels to speed up interrupt parsing. Each UART has its own 16C550 compatible set of configuration registers, TX and RX FIFOs of 64 bytes, fully programmable transmit and receive FIFO trigger levels, TX and RX FIFO level counters, automatic RTS/CTS or DTR/DSR hardware flow control with programmable hysteresis, automatic software (Xon/Xoff) flow control, RS-485 half-duplex direction control, and auto address detection, Intel or Motorola bus interface and sleep mode with a wake-up indicator.

Features

AI Translation
  • 1.62V to 3.6V with 5V Tolerant Serial Inputs
  • Single Interrupt output for all 4 UARTs
  • A Global Interrupt Source Register for all 4 UARTs
  • 5G “Flat” UART Registers for easier programming
  • Simultaneous Initialization of all UART channels
  • A General Purpose Command-driven 16-bit Timer/counter
  • Sleep Mode with Wake-up Indication
  • Highly Integrated Device for Space Saving
  • Each UART is independently controlled with:
    • 16C550 Compatible 5G Register Set
    • 64-byte Transmit and Receive FIFOs
    • Transmit and Receive FIFO Level Counters
    • Programmable TX and RX FIFO Trigger Level
    • Automatic RTS/CTS or DTR/DSR Flow Control
    • Automatic Xon/Xoff Software Flow Control
    • RS485 HDX Control Output
    • RS485 auto address detection
    • Infrared (IrDA 1.0/1.1) Data Encoder/Decoder
    • Programmable Data Rate with Prescaler
  • Up to 8 Mbps Serial Data Rate with 64MHz external clock input
  • Crystal oscillator(up to 24MHz) or external clock(up to 80MHz) input
  • Built in Power-On-Reset circuit

Applications

AI Translation
  • Remote Access Servers
  • Ethernet Network to Serial Ports
  • Network Management
  • Factory Automation and Process Control
  • Point-of-Sale Systems
  • Multi-port RS-232/RS-422/RS-485 Cards