- Pinout
- Footprint
TI UCC27212DPRR
| Manufacturer | |
| MPN | UCC27212DPRR |
| LCSC Part # | C2677326 |
| Packaging | WSON-10-EP(4x4) |
| Customer # | |
| Key Attributes | High-Frequency Half-Bridge Driver |
| Datasheet | TI UCC27212DPRR |
| RoHS Compliance | 2 documents available |
| Alternative Parts | 2 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers | |
| Manufacturer | TI | |
| Packaging | WSON-10-EP(4x4) | |
| Input Logic Level - Low | 1.2V~1.9V | |
| Low Level Delay Time | 20ns | |
| High Level Delay Time | 16ns | |
| Quiescent Current | 85uA | |
| Input Logic Level - High | 1.7V~2.55V | |
| Voltage - Supply | 7V~17V | |
| Operating Temperature | -40℃~+140℃ | |
| Driven Configuration | Half-Bridge | |
| Current - Output Low(IOL) | 4A | |
| Rise Time | 7.8ns | |
| Fall Time | 6ns | |
| Features | Built-in bootstrap diode | |
| Current - Output High(IOH) | 4A | |
| Load Type | MOSFET |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers | |
| Manufacturer | TI | |
| Packaging | WSON-10-EP(4x4) | |
| Input Logic Level - Low | 1.2V~1.9V | |
| Low Level Delay Time | 20ns | |
| High Level Delay Time | 16ns | |
| Quiescent Current | 85uA | |
| Input Logic Level - High | 1.7V~2.55V | |
| Voltage - Supply | 7V~17V |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+140℃ | |
| Driven Configuration | Half-Bridge | |
| Current - Output Low(IOL) | 4A | |
| Rise Time | 7.8ns | |
| Fall Time | 6ns | |
| Features | Built-in bootstrap diode | |
| Current - Output High(IOH) | 4A | |
| Load Type | MOSFET |
Introduction
The UCC27212 device has a peak output current of 4-A source and 4-A sink, which allows for the ability to drive large power MOSFETs. The device features an on-chip 120-V rated bootstrap diode eliminating the need for external discrete diodes. The input structure can directly handle -10 V, which increases robustness and is also independent of supply voltage. The UCC27212 offers 5 V UVLO which helps lower power losses and increased input hysteresis that allows for interface to analog or digital PWM controllers with enhanced noise immunity. The switching node of the UCC27212 (HS pin) can handle -18 V maximum, which allows the high-side channel to be protected from inherent negative voltages.
Features
- 4-A Sink, 4-A Source Output Currents
- Maximum Boot Voltage 120-V DC
- 7-V to 17-V VDD Operating Range
- 20-V ABS Maximum VDD Operating Range
- 5-V Turn-off Under Voltage Lockout (UVLO)
- Input Pins Can Tolerate -10 V to +20 V
- 7.2-ns Rise and 5.5-ns Fall Time (1000-pF Load)
- 20-ns Typical Propagation Delay
- 4-ns Typical Delay Matching
- Specified from -40°C to +140°C
Applications
- DC-DC Power Supplies
- Merchant Telecom Rectifiers
- Half-Bridge and Full-Bridge Converters
- Push-Pull and Active-Clamp Forward Converters
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers | |
| Manufacturer | TI | |
| Packaging | WSON-10-EP(4x4) | |
| Input Logic Level - Low | 1.2V~1.9V | |
| Low Level Delay Time | 20ns | |
| High Level Delay Time | 16ns | |
| Quiescent Current | 85uA | |
| Input Logic Level - High | 1.7V~2.55V | |
| Voltage - Supply | 7V~17V | |
| Operating Temperature | -40℃~+140℃ | |
| Driven Configuration | Half-Bridge | |
| Current - Output Low(IOL) | 4A | |
| Rise Time | 7.8ns | |
| Fall Time | 6ns | |
| Features | Built-in bootstrap diode | |
| Current - Output High(IOH) | 4A | |
| Load Type | MOSFET |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers | |
| Manufacturer | TI | |
| Packaging | WSON-10-EP(4x4) | |
| Input Logic Level - Low | 1.2V~1.9V | |
| Low Level Delay Time | 20ns | |
| High Level Delay Time | 16ns | |
| Quiescent Current | 85uA | |
| Input Logic Level - High | 1.7V~2.55V | |
| Voltage - Supply | 7V~17V |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+140℃ | |
| Driven Configuration | Half-Bridge | |
| Current - Output Low(IOL) | 4A | |
| Rise Time | 7.8ns | |
| Fall Time | 6ns | |
| Features | Built-in bootstrap diode | |
| Current - Output High(IOH) | 4A | |
| Load Type | MOSFET |
Introduction
The UCC27212 device has a peak output current of 4-A source and 4-A sink, which allows for the ability to drive large power MOSFETs. The device features an on-chip 120-V rated bootstrap diode eliminating the need for external discrete diodes. The input structure can directly handle -10 V, which increases robustness and is also independent of supply voltage. The UCC27212 offers 5 V UVLO which helps lower power losses and increased input hysteresis that allows for interface to analog or digital PWM controllers with enhanced noise immunity. The switching node of the UCC27212 (HS pin) can handle -18 V maximum, which allows the high-side channel to be protected from inherent negative voltages.
Features
- 4-A Sink, 4-A Source Output Currents
- Maximum Boot Voltage 120-V DC
- 7-V to 17-V VDD Operating Range
- 20-V ABS Maximum VDD Operating Range
- 5-V Turn-off Under Voltage Lockout (UVLO)
- Input Pins Can Tolerate -10 V to +20 V
- 7.2-ns Rise and 5.5-ns Fall Time (1000-pF Load)
- 20-ns Typical Propagation Delay
- 4-ns Typical Delay Matching
- Specified from -40°C to +140°C
Applications
- DC-DC Power Supplies
- Merchant Telecom Rectifiers
- Half-Bridge and Full-Bridge Converters
- Push-Pull and Active-Clamp Forward Converters
C2677326 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |