TI TPS51604DSGT
| Manufacturer | |
| MPN | TPS51604DSGT |
| LCSC Part # | C2676927 |
| Packaging | WSON-8-EP(2x2) |
| Customer # | |
| Key Attributes | 4.5V~5.5V WSON-8-EP(2x2) Gate Drivers RoHS |
| Datasheet | TI TPS51604DSGT |
| RoHS Compliance | 1 documents available |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers | |
| Manufacturer | TI | |
| Packaging | WSON-8-EP(2x2) | |
| Input Logic Level - Low | - | |
| Low Level Delay Time | - | |
| High Level Delay Time | - | |
| Quiescent Current | - | |
| Input Logic Level - High | - | |
| Voltage - Supply | 4.5V~5.5V | |
| Driven Configuration | Half-Bridge | |
| Operating Temperature | -40℃~+105℃ | |
| Current - Output Low(IOL) | - | |
| Rise Time | 30ns | |
| Fall Time | 8ns | |
| Features | Enable shutdown;Dead-time control;Interleaved conduction protection | |
| Current - Output High(IOH) | - | |
| Load Type | MOSFET |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers | |
| Manufacturer | TI | |
| Packaging | WSON-8-EP(2x2) | |
| Input Logic Level - Low | - | |
| Low Level Delay Time | - | |
| High Level Delay Time | - | |
| Quiescent Current | - | |
| Input Logic Level - High | - | |
| Voltage - Supply | 4.5V~5.5V |
| Type | Description | |
|---|---|---|
| Driven Configuration | Half-Bridge | |
| Operating Temperature | -40℃~+105℃ | |
| Current - Output Low(IOL) | - | |
| Rise Time | 30ns | |
| Fall Time | 8ns | |
| Features | Enable shutdown;Dead-time control;Interleaved conduction protection | |
| Current - Output High(IOH) | - | |
| Load Type | MOSFET |
Introduction
The TPS51604 driver is optimized for high-frequency CPU VCORE applications. Advanced features such as dead-time reduction driving and automatic zero-crossing enable efficiency optimization across the full load range. The SKIP pin provides a CCM operation option to support controlled management of the output voltage. Additionally, the TPS51604 supports two low-power modes. With PWM input tri-state, quiescent current is reduced to 130μA while supporting immediate response. When SKIP is held in tri-state, current is reduced to 8μA (resuming switching typically requires 20μs). Paired with a suitable controller, this driver can serve as an outstanding high-performance power system. The TPS51604 device is a synchronous-buck MOSFET driver designed to drive both high-side and low-side MOSFETs. It allows high-frequency operation with current driving capability matched to the application. The integrated boost switch is internal. The TPS51604 device employs dead-time reduction control and shoot-through protection, which helps avoid simultaneous conduction of high-side and low-side MOSFETs. Also, the drivers improve light-load efficiency with integrated DCM-mode operation using adaptive crossing detection. Typical applications yield a steady-state duty cycle of 60% or less. For high steady-state duty cycle applications, including a small external Schottky diode may help to ensure sufficient charging of the bootstrap capacitor.
Features
- Reduced dead-time drive circuit optimized for CCM
- Automatic zero-crossing detection for optimized DCM efficiency
- Multiple low-power modes for optimized light-load efficiency
- Optimized signal path delay for high-efficiency operation
- Integrated BST switch drive strength for Ultrabook FETs
- Optimized for 5V FET drive
- Conversion input voltage range (VIN): 4.5V to 28V
- 2mm×2mm 8-pin WSON thermal pad package
Applications
- Tablets with high-frequency CPU and the following power inputs:
- Adapter
- Battery
- NVDC
- 5V to 12V power rails
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers | |
| Manufacturer | TI | |
| Packaging | WSON-8-EP(2x2) | |
| Input Logic Level - Low | - | |
| Low Level Delay Time | - | |
| High Level Delay Time | - | |
| Quiescent Current | - | |
| Input Logic Level - High | - | |
| Voltage - Supply | 4.5V~5.5V | |
| Driven Configuration | Half-Bridge | |
| Operating Temperature | -40℃~+105℃ | |
| Current - Output Low(IOL) | - | |
| Rise Time | 30ns | |
| Fall Time | 8ns | |
| Features | Enable shutdown;Dead-time control;Interleaved conduction protection | |
| Current - Output High(IOH) | - | |
| Load Type | MOSFET |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers | |
| Manufacturer | TI | |
| Packaging | WSON-8-EP(2x2) | |
| Input Logic Level - Low | - | |
| Low Level Delay Time | - | |
| High Level Delay Time | - | |
| Quiescent Current | - | |
| Input Logic Level - High | - | |
| Voltage - Supply | 4.5V~5.5V |
| Type | Description | |
|---|---|---|
| Driven Configuration | Half-Bridge | |
| Operating Temperature | -40℃~+105℃ | |
| Current - Output Low(IOL) | - | |
| Rise Time | 30ns | |
| Fall Time | 8ns | |
| Features | Enable shutdown;Dead-time control;Interleaved conduction protection | |
| Current - Output High(IOH) | - | |
| Load Type | MOSFET |
Introduction
The TPS51604 driver is optimized for high-frequency CPU VCORE applications. Advanced features such as dead-time reduction driving and automatic zero-crossing enable efficiency optimization across the full load range. The SKIP pin provides a CCM operation option to support controlled management of the output voltage. Additionally, the TPS51604 supports two low-power modes. With PWM input tri-state, quiescent current is reduced to 130μA while supporting immediate response. When SKIP is held in tri-state, current is reduced to 8μA (resuming switching typically requires 20μs). Paired with a suitable controller, this driver can serve as an outstanding high-performance power system. The TPS51604 device is a synchronous-buck MOSFET driver designed to drive both high-side and low-side MOSFETs. It allows high-frequency operation with current driving capability matched to the application. The integrated boost switch is internal. The TPS51604 device employs dead-time reduction control and shoot-through protection, which helps avoid simultaneous conduction of high-side and low-side MOSFETs. Also, the drivers improve light-load efficiency with integrated DCM-mode operation using adaptive crossing detection. Typical applications yield a steady-state duty cycle of 60% or less. For high steady-state duty cycle applications, including a small external Schottky diode may help to ensure sufficient charging of the bootstrap capacitor.
Features
- Reduced dead-time drive circuit optimized for CCM
- Automatic zero-crossing detection for optimized DCM efficiency
- Multiple low-power modes for optimized light-load efficiency
- Optimized signal path delay for high-efficiency operation
- Integrated BST switch drive strength for Ultrabook FETs
- Optimized for 5V FET drive
- Conversion input voltage range (VIN): 4.5V to 28V
- 2mm×2mm 8-pin WSON thermal pad package
Applications
- Tablets with high-frequency CPU and the following power inputs:
- Adapter
- Battery
- NVDC
- 5V to 12V power rails
C2676927 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |

