TI TLA2021IRUGR
| Manufacturer | |
| MPN | TLA2021IRUGR |
| LCSC Part # | C1880094 |
| Packaging | X2-QFN-10(1.5x2) |
| Customer # | |
| Key Attributes | Cost-optimized ultra-small, 12-bit system monitoring ADC |
| Datasheet | TI TLA2021IRUGR |
| RoHS Compliance | 2 documents available |
| Alternative Parts | 5 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC) | |
| Manufacturer | TI | |
| Packaging | X2-QFN-10(1.5x2) | |
| Operating Temperature | -40℃~+85℃ | |
| Interface | I2C | |
| Quiescent Current (Iq) | 500nA | |
| Voltage - Supply | 2V~5.5V | |
| Number of Channels | 1 | |
| Integral non - linearity | 1LSB | |
| Voltage Reference | Built-in | |
| Clock/Oscillator | Built-in | |
| Clock Frequency | 1MHz | |
| Features | Power-on reset;Soft reset | |
| Resolution(Bits) | 12;3.3kHz | |
| S/N Ratio | - | |
| DNL (LSB) | - | |
| ADC architecture | Sigma-Delta | |
| Programmable Gain | Not supported |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC) | |
| Manufacturer | TI | |
| Packaging | X2-QFN-10(1.5x2) | |
| Operating Temperature | -40℃~+85℃ | |
| Interface | I2C | |
| Quiescent Current (Iq) | 500nA | |
| Voltage - Supply | 2V~5.5V | |
| Number of Channels | 1 | |
| Integral non - linearity | 1LSB |
| Type | Description | |
|---|---|---|
| Voltage Reference | Built-in | |
| Clock/Oscillator | Built-in | |
| Clock Frequency | 1MHz | |
| Features | Power-on reset;Soft reset | |
| Resolution(Bits) | 12;3.3kHz | |
| S/N Ratio | - | |
| DNL (LSB) | - | |
| ADC architecture | Sigma-Delta | |
| Programmable Gain | Not supported |
Introduction
The TLA2021, TLA2022, and TLA2024 devices (TLA202x) are easy-to-use, low-power, 12-bit Δ-Σ ADCs designed for any type of system monitoring application, such as power supply or battery voltage monitoring, current sensing, or temperature measurement. The TLA2021 and TLA2022 are single-channel ADCs available in an ultra-compact, leadless 10-pin X2QFN package, while the TLA2024 features a flexible input MUX with two differential input measurement options or four single-ended input measurement options. The TLA202x integrates a voltage reference and oscillator. In addition, the TLA2022 and TLA2024 include a PGA with selectable input ranges from ±256mV to ±6.144V, supporting both large- and small-signal measurements simultaneously. The TLA202x communicates via an I²C-compatible interface and can operate in either continuous-conversion mode or single-shot conversion mode. In single-shot conversion mode, the devices automatically power down after a single conversion, significantly reducing power consumption during idle periods. All these features, combined with a wide operating supply voltage range, make the TLA202x well-suited for power-constrained and space-constrained system monitoring applications that demand high efficiency, high power density, and robustness.
Features
- Industry's lowest-cost 12-bit ADC - Ultra-compact X2QFN package: 2mm×1.5mm
- High integration
- 4 single-ended or 2 differential inputs achieve the industry's highest channel density ADC with TLA2024 (0.75mm² per channel)
- PGA (TLA2022 and TLA2024 only)
- Voltage reference
- Oscillator
- Low current consumption: 150μA
- Wide supply voltage range: 2V to 5.5V
- Programmable data rate: 128SPS to 3.3kSPS
- I²C-compatible interface
- Standard mode and fast mode support
- Three pin-selectable I²C addresses
- Operating temperature range: -40°C to +85°C
Applications
- Consumer Electronics
- TVs, tablets, mobile phones
- Wearable devices
- Drones, toys
- Home appliances and kitchen appliances
- Building Automation
- HVAC, smoke detectors
- Battery voltage and current monitoring
- Temperature sensing
- Battery-powered, portable instrumentation
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC) | |
| Manufacturer | TI | |
| Packaging | X2-QFN-10(1.5x2) | |
| Operating Temperature | -40℃~+85℃ | |
| Interface | I2C | |
| Quiescent Current (Iq) | 500nA | |
| Voltage - Supply | 2V~5.5V | |
| Number of Channels | 1 | |
| Integral non - linearity | 1LSB | |
| Voltage Reference | Built-in | |
| Clock/Oscillator | Built-in | |
| Clock Frequency | 1MHz | |
| Features | Power-on reset;Soft reset | |
| Resolution(Bits) | 12;3.3kHz | |
| S/N Ratio | - | |
| DNL (LSB) | - | |
| ADC architecture | Sigma-Delta | |
| Programmable Gain | Not supported |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC) | |
| Manufacturer | TI | |
| Packaging | X2-QFN-10(1.5x2) | |
| Operating Temperature | -40℃~+85℃ | |
| Interface | I2C | |
| Quiescent Current (Iq) | 500nA | |
| Voltage - Supply | 2V~5.5V | |
| Number of Channels | 1 | |
| Integral non - linearity | 1LSB |
| Type | Description | |
|---|---|---|
| Voltage Reference | Built-in | |
| Clock/Oscillator | Built-in | |
| Clock Frequency | 1MHz | |
| Features | Power-on reset;Soft reset | |
| Resolution(Bits) | 12;3.3kHz | |
| S/N Ratio | - | |
| DNL (LSB) | - | |
| ADC architecture | Sigma-Delta | |
| Programmable Gain | Not supported |
Introduction
The TLA2021, TLA2022, and TLA2024 devices (TLA202x) are easy-to-use, low-power, 12-bit Δ-Σ ADCs designed for any type of system monitoring application, such as power supply or battery voltage monitoring, current sensing, or temperature measurement. The TLA2021 and TLA2022 are single-channel ADCs available in an ultra-compact, leadless 10-pin X2QFN package, while the TLA2024 features a flexible input MUX with two differential input measurement options or four single-ended input measurement options. The TLA202x integrates a voltage reference and oscillator. In addition, the TLA2022 and TLA2024 include a PGA with selectable input ranges from ±256mV to ±6.144V, supporting both large- and small-signal measurements simultaneously. The TLA202x communicates via an I²C-compatible interface and can operate in either continuous-conversion mode or single-shot conversion mode. In single-shot conversion mode, the devices automatically power down after a single conversion, significantly reducing power consumption during idle periods. All these features, combined with a wide operating supply voltage range, make the TLA202x well-suited for power-constrained and space-constrained system monitoring applications that demand high efficiency, high power density, and robustness.
Features
- Industry's lowest-cost 12-bit ADC - Ultra-compact X2QFN package: 2mm×1.5mm
- High integration
- 4 single-ended or 2 differential inputs achieve the industry's highest channel density ADC with TLA2024 (0.75mm² per channel)
- PGA (TLA2022 and TLA2024 only)
- Voltage reference
- Oscillator
- Low current consumption: 150μA
- Wide supply voltage range: 2V to 5.5V
- Programmable data rate: 128SPS to 3.3kSPS
- I²C-compatible interface
- Standard mode and fast mode support
- Three pin-selectable I²C addresses
- Operating temperature range: -40°C to +85°C
Applications
- Consumer Electronics
- TVs, tablets, mobile phones
- Wearable devices
- Drones, toys
- Home appliances and kitchen appliances
- Building Automation
- HVAC, smoke detectors
- Battery voltage and current monitoring
- Temperature sensing
- Battery-powered, portable instrumentation
C1880094 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



