NORDIC NRF5340 AUDIO DK
| Manufacturer | |
| MPN | NRF5340 AUDIO DK |
| LCSC Part # | C17699580 |
| Packaging | - |
| Customer # | |
| Key Attributes | nRF5340 RF, RFID, Wireless Evaluation Boards RoHS |
| Datasheet | NORDIC NRF5340 AUDIO DK |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/RF, RFID, Wireless Evaluation Boards | |
| Manufacturer | NORDIC | |
| Packaging | - | |
| Features | Mesh networking | |
| Utilized IC / Part | nRF5340 | |
| Voltage - Supply | 1.7V~5.5V | |
| Interface | UART;GPIO;SPI;I2C;USB;DMA;PWM |
| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/RF, RFID, Wireless Evaluation Boards | |
| Manufacturer | NORDIC | |
| Packaging | - | |
| Features | Mesh networking |
| Type | Description | |
|---|---|---|
| Utilized IC / Part | nRF5340 | |
| Voltage - Supply | 1.7V~5.5V | |
| Interface | UART;GPIO;SPI;I2C;USB;DMA;PWM |
Introduction
The nRF5340 Audio Development Kit (DK) is the recommended platform for Bluetooth “LE Audio” products and contains everything needed to start development. The kit is configurable and can function as a USB dongle to send or receive audio data from a PC. It can also function as a Business Headset, a broadcast receiver or a True Wireless Stereo (TWS) Earbud. The three main components of this DK are the nRF5340 SoC, nPM1100 PMIC, and Cirrus Logic’s CS47L63 Audio DSP. The CS47L63’s high-performance DAC and differential output driver are optimized for direct connection to an external headphone load. It is perfect for earbuds with mono-only and direct speaker output. The nRF5340 Audio DK is typically powered via USB and has a battery connector for a Li-Ion/Li-Po battery. The current consumption can be measured by using the dedicated current measurement pins. The new “Low Complexity Communications Codec” (LC3) that replaced Bluetooth Classic’s “Low Complexity Subband Codec” (SBC) is also available for this DK. The LC3 codec has superior audio quality compared to SBC, even at about half the wireless data rate. This low data rate is a key factor in minimizing the power consumption of your products.
Features
- Bluetooth LE Audio support
- Based on our nRF5340 SoC
- 2.4 GHz antenna
- Two 3.5 mm audio jacks
- Cirrus Logic Audio DSP CS47L63
- SWF RF connector for direct RF measurements
- 5 user-programmable buttons
- 4 user-programmable LEDs
- SEGGER J-Link debugger on board
- Pins for measuring power consumption
- SD-Card holder for additional storage
Applications
- LE Audio
- Headphones
- Hearing Aids
- Audio Guidles
- Office Headsets
- Audio Broadcast Solutions
- Conference Speakerphones
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/RF, RFID, Wireless Evaluation Boards | |
| Manufacturer | NORDIC | |
| Packaging | - | |
| Features | Mesh networking | |
| Utilized IC / Part | nRF5340 | |
| Voltage - Supply | 1.7V~5.5V | |
| Interface | UART;GPIO;SPI;I2C;USB;DMA;PWM |
| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/RF, RFID, Wireless Evaluation Boards | |
| Manufacturer | NORDIC | |
| Packaging | - | |
| Features | Mesh networking |
| Type | Description | |
|---|---|---|
| Utilized IC / Part | nRF5340 | |
| Voltage - Supply | 1.7V~5.5V | |
| Interface | UART;GPIO;SPI;I2C;USB;DMA;PWM |
Introduction
The nRF5340 Audio Development Kit (DK) is the recommended platform for Bluetooth “LE Audio” products and contains everything needed to start development. The kit is configurable and can function as a USB dongle to send or receive audio data from a PC. It can also function as a Business Headset, a broadcast receiver or a True Wireless Stereo (TWS) Earbud. The three main components of this DK are the nRF5340 SoC, nPM1100 PMIC, and Cirrus Logic’s CS47L63 Audio DSP. The CS47L63’s high-performance DAC and differential output driver are optimized for direct connection to an external headphone load. It is perfect for earbuds with mono-only and direct speaker output. The nRF5340 Audio DK is typically powered via USB and has a battery connector for a Li-Ion/Li-Po battery. The current consumption can be measured by using the dedicated current measurement pins. The new “Low Complexity Communications Codec” (LC3) that replaced Bluetooth Classic’s “Low Complexity Subband Codec” (SBC) is also available for this DK. The LC3 codec has superior audio quality compared to SBC, even at about half the wireless data rate. This low data rate is a key factor in minimizing the power consumption of your products.
Features
- Bluetooth LE Audio support
- Based on our nRF5340 SoC
- 2.4 GHz antenna
- Two 3.5 mm audio jacks
- Cirrus Logic Audio DSP CS47L63
- SWF RF connector for direct RF measurements
- 5 user-programmable buttons
- 4 user-programmable LEDs
- SEGGER J-Link debugger on board
- Pins for measuring power consumption
- SD-Card holder for additional storage
Applications
- LE Audio
- Headphones
- Hearing Aids
- Audio Guidles
- Office Headsets
- Audio Broadcast Solutions
- Conference Speakerphones
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS Compliant |
| ECCN | 5A992 |
| CNHTS | 8517629900 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | ROHS Compliant |
| ECCN | 5A992 |
| CNHTS | 8517629900 |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |



