VISHAY LH1512BAC
| Manufacturer | |
| MPN | LH1512BAC |
| LCSC Part # | C1558766 |
| Packaging | SMD-8P |
| Customer # | |
| Key Attributes | Dual 1 Form A/B, C Solid-State Relay |
| Datasheet | VISHAY LH1512BAC |
| RoHS Compliance | 2 documents available |
| Alternative Parts | 1 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Relays/Solid State Relays (SSR) | |
| Manufacturer | VISHAY | |
| Packaging | SMD-8P | |
| Turn-on time | 1.4ms | |
| Isolation Voltage(Vrms) | 3.75kV | |
| Turn-off time | 700us | |
| Forward voltage | 1.45V | |
| Forward Current(If) | 50mA | |
| Load Voltage | 200V | |
| Total Power Dissipation(Pd) | 600mW | |
| Insulation Resistance | - | |
| Load Current | 200mA | |
| Contact Form | 1 Set Normally Open: 1A (SPST NO);One set of normally closed: 1B (SPST-NC) | |
| RDS(on) | 10Ω | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Overcurrent Protection | |
| Input type | - |
| Type | Description | |
|---|---|---|
| Category | Relays/Solid State Relays (SSR) | |
| Manufacturer | VISHAY | |
| Packaging | SMD-8P | |
| Turn-on time | 1.4ms | |
| Isolation Voltage(Vrms) | 3.75kV | |
| Turn-off time | 700us | |
| Forward voltage | 1.45V | |
| Forward Current(If) | 50mA | |
| Load Voltage | 200V |
| Type | Description | |
|---|---|---|
| Total Power Dissipation(Pd) | 600mW | |
| Insulation Resistance | - | |
| Load Current | 200mA | |
| Contact Form | 1 Set Normally Open: 1A (SPST NO);One set of normally closed: 1B (SPST-NC) | |
| RDS(on) | 10Ω | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Overcurrent Protection | |
| Input type | - |
Introduction
The LH1512 relays contain normally open and normally closed switches that can be used independently as a 1 form A and 1 form B relay, or when used together, as a 1 form C relay. The relays are constructed as a multi-chip hybrid device. Actuation control is via an infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity.
Features
- Current limit protection
- Isolation test voltage 3750 VRMS
- Typical Rₒₙ 10 Ω
- Load voltage 200 V
- Load current 200 mA
- High surge capability
- Clean bounce free switching
- Low power consumption
- SMD lead available on tape and reel
Applications
- General telecom switching - On / off hook control - Ring delay - Dial pulse - Ground start - Ground fault protection
- Instrumentation
- Industrial controls
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Relays/Solid State Relays (SSR) | |
| Manufacturer | VISHAY | |
| Packaging | SMD-8P | |
| Turn-on time | 1.4ms | |
| Isolation Voltage(Vrms) | 3.75kV | |
| Turn-off time | 700us | |
| Forward voltage | 1.45V | |
| Forward Current(If) | 50mA | |
| Load Voltage | 200V | |
| Total Power Dissipation(Pd) | 600mW | |
| Insulation Resistance | - | |
| Load Current | 200mA | |
| Contact Form | 1 Set Normally Open: 1A (SPST NO);One set of normally closed: 1B (SPST-NC) | |
| RDS(on) | 10Ω | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Overcurrent Protection | |
| Input type | - |
| Type | Description | |
|---|---|---|
| Category | Relays/Solid State Relays (SSR) | |
| Manufacturer | VISHAY | |
| Packaging | SMD-8P | |
| Turn-on time | 1.4ms | |
| Isolation Voltage(Vrms) | 3.75kV | |
| Turn-off time | 700us | |
| Forward voltage | 1.45V | |
| Forward Current(If) | 50mA | |
| Load Voltage | 200V |
| Type | Description | |
|---|---|---|
| Total Power Dissipation(Pd) | 600mW | |
| Insulation Resistance | - | |
| Load Current | 200mA | |
| Contact Form | 1 Set Normally Open: 1A (SPST NO);One set of normally closed: 1B (SPST-NC) | |
| RDS(on) | 10Ω | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Overcurrent Protection | |
| Input type | - |
Introduction
The LH1512 relays contain normally open and normally closed switches that can be used independently as a 1 form A and 1 form B relay, or when used together, as a 1 form C relay. The relays are constructed as a multi-chip hybrid device. Actuation control is via an infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity.
Features
- Current limit protection
- Isolation test voltage 3750 VRMS
- Typical Rₒₙ 10 Ω
- Load voltage 200 V
- Load current 200 mA
- High surge capability
- Clean bounce free switching
- Low power consumption
- SMD lead available on tape and reel
Applications
- General telecom switching - On / off hook control - Ring delay - Dial pulse - Ground start - Ground fault protection
- Instrumentation
- Industrial controls
C1558766 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8536411090 |
| USHTS | 8536410030 |
| TARIC | 8536411090 |
| CAHTS | 8536410099 |
| BRHTS | 85364100 |
| INHTS | 85364100 |
| MXHTS | 8536.41.10 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8536411090 |
| USHTS | 8536410030 |
| TARIC | 8536411090 |
| Type | Details |
|---|---|
| CAHTS | 8536410099 |
| BRHTS | 85364100 |
| INHTS | 85364100 |
| MXHTS | 8536.41.10 |

