LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

RENESAS HIP4083ABZ

Manufacturer
MPN
HIP4083ABZ
LCSC Part #
C1549622
Packaging
SOIC-16
Customer #
Key Attributes
3 MOSFET 400mA 35ns 30ns 450mA SOIC-16 Full, Half-Bridge (H Bridge) Drivers RoHS
DatasheetRENESAS HIP4083ABZ
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Full, Half-Bridge (H Bridge) Drivers
ManufacturerRENESAS
PackagingSOIC-16
Input Logic Level - High-
Input Logic Level - Low-
Propagation Delay tpHL-
Quiescent Current(Iq)1.5mA
Number of Drivers3
Load TypeMOSFET
Current - Output High(IOH)400mA
Rise Time35ns
Fall Time30ns
Propagation Delay tpLH-
Driven ConfigurationHigh Side
Current - Output Low(IOL)450mA
Operating Temperature-40℃~+125℃
FeaturesEnable shutdown;Dead-time control
Voltage - Supply7V~15V

Introduction

AI Translation

The HIP4083 is a three phase high side N-channel MOSFET driver, specifically targeted for PWM motor control. Two HIP4083 may be used together for 3 phase full bridge applications. Alternatively, the lower gates may be controlled directly from a buffered microprocessor output. Unlike other members of the HIP408x family, the HIP4083 has no built in turn-on delay. Each output (AHO, BHO, and CHO) will turn-on 65ns after its input is switched low. Likewise, each output will turn-off 60ns after its input is switched high. Very short and very long dead times are possible when two HIP4083 are used to drive a full bridge. This dead time is controlled by the input signal timing. The HIP4083 does not have a built in charge pump. Therefore, the bootstrap capacitors must be recharged on a periodic basis by initiating a short refresh pulse. In most bridge applications, this will happen automatically every time the lower FETs turn-on and the upper FETs turn-off. However, it is still possible to use the HIP4083 in applications that require the high side FETs to be on for extended periods of time. This can be easily accomplished by sending a short refresh pulse to the DIS pin. The HIP4083 has reduced drive current compared to the HIP4086 making it ideal for low to moderate power applications. The HIP4083 is optimized for applications where size and cost are important. For high power applications driving large power FETs, the HIP4086 is recommended.

Features

AI Translation
  • Independently Drives Three High Side N-Channel MOSFETs in Three Phase Bridge Configuration
  • Bootstrap Supply Max Voltage to 95VDC
  • Bias Supply Operation from 7V to 15V
  • Drives 1000pF Load with Typical Rise Times of 35ns and Fall Times of 30ns
  • CMOS/TTL Compatible Inputs
  • Programmable Undervoltage Protection
  • Pb-free Available

Applications

AI Translation
  • Brushless Motors
  • High Side Switches
  • AC Motor Drives
  • Switched Reluctance Motor Drives