TI SN74ALS193AN
| Manufacturer | |
| MPN | SN74ALS193AN |
| LCSC Part # | C1547966 |
| Packaging | PDIP-16 |
| Customer # | |
| Key Attributes | Rising Edge 1 30MHz PDIP-16 Counters, Dividers RoHS |
| Datasheet | TI SN74ALS193AN |
| RoHS Compliance | 1 documents available |
| Alternative Parts | 5 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Counters, Dividers | |
| Manufacturer | TI | |
| Packaging | PDIP-16 | |
| Logic Family | 74ALS | |
| Voltage - Supply | 4.5V~5.5V | |
| Direction | Up Counter;Down Counter | |
| Trigger Type | Rising Edge | |
| Timing | Synchronous | |
| Operating Temperature | 0℃~+70℃ | |
| Reset | Asynchronous | |
| Number of Elements | 1 | |
| Propagation Delay | - | |
| Count Rate | 30MHz | |
| Features | Programmable divide ratio;Asynchronous parallel load;Multi-mode counting;Synchronous counting;Cascade counter;Reset function |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Counters, Dividers | |
| Manufacturer | TI | |
| Packaging | PDIP-16 | |
| Logic Family | 74ALS | |
| Voltage - Supply | 4.5V~5.5V | |
| Direction | Up Counter;Down Counter | |
| Trigger Type | Rising Edge |
| Type | Description | |
|---|---|---|
| Timing | Synchronous | |
| Operating Temperature | 0℃~+70℃ | |
| Reset | Asynchronous | |
| Number of Elements | 1 | |
| Propagation Delay | - | |
| Count Rate | 30MHz | |
| Features | Programmable divide ratio;Asynchronous parallel load;Multi-mode counting;Synchronous counting;Cascade counter;Reset function |
Introduction
The ALS193A is a synchronous reversible 4-bit binary up/down counter. Synchronous counting operation is achieved by clocking all flip-flops simultaneously, so that the outputs change simultaneously when instructed by the control logic. This mode of operation eliminates the output counting spikes typically associated with asynchronous (ripple clock) counters. The outputs of the four flip-flops are triggered on the low-to-high transition of either count/clock (UP or DOWN) input. The counting direction is determined by which count input is pulsed, while the other count input is held high. All four counters are fully programmable; that is, each output can be preset to any level by pulling the LOAD input low and applying the desired data to the data inputs. The outputs will follow the data inputs regardless of the count pulses. This feature allows the counter to be used as a divide-by-N counter by modifying the count length via preset inputs. Applying a high level to the clear (CLR) input forces all outputs low. The clear function is independent of the count and LOAD inputs. The UP, DOWN, and LOAD inputs are all buffered to reduce drive requirements, which significantly reduces the load or required current from clock drivers and similar circuits in long parallel word configurations. These counters are designed to cascade without external circuitry. The borrow (BO) output generates a low pulse when the count reaches zero (all Q outputs low) and the DOWN input is low. Similarly, the carry (CO) output generates a low pulse when the count reaches 15 (all Q outputs high) and the UP input is low. Counter cascading can be easily achieved by feeding BO and CO to the down-count and up-count inputs of the next-stage counter, respectively. The SN74ALS193A operates over a temperature range of 0℃ to 70℃.
Features
- Look-ahead circuitry enhances cascaded counter performance
- Fully synchronous in counting mode
- Parallel asynchronous load for modulo-N count lengths
- Asynchronous clear
- Available in multiple package options, including plastic small-outline (D), ceramic chip carrier (FK), and standard plastic (N) and ceramic (J) 300-mil DIP packages
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Counters, Dividers | |
| Manufacturer | TI | |
| Packaging | PDIP-16 | |
| Logic Family | 74ALS | |
| Voltage - Supply | 4.5V~5.5V | |
| Direction | Up Counter;Down Counter | |
| Trigger Type | Rising Edge | |
| Timing | Synchronous | |
| Operating Temperature | 0℃~+70℃ | |
| Reset | Asynchronous | |
| Number of Elements | 1 | |
| Propagation Delay | - | |
| Count Rate | 30MHz | |
| Features | Programmable divide ratio;Asynchronous parallel load;Multi-mode counting;Synchronous counting;Cascade counter;Reset function |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Counters, Dividers | |
| Manufacturer | TI | |
| Packaging | PDIP-16 | |
| Logic Family | 74ALS | |
| Voltage - Supply | 4.5V~5.5V | |
| Direction | Up Counter;Down Counter | |
| Trigger Type | Rising Edge |
| Type | Description | |
|---|---|---|
| Timing | Synchronous | |
| Operating Temperature | 0℃~+70℃ | |
| Reset | Asynchronous | |
| Number of Elements | 1 | |
| Propagation Delay | - | |
| Count Rate | 30MHz | |
| Features | Programmable divide ratio;Asynchronous parallel load;Multi-mode counting;Synchronous counting;Cascade counter;Reset function |
Introduction
The ALS193A is a synchronous reversible 4-bit binary up/down counter. Synchronous counting operation is achieved by clocking all flip-flops simultaneously, so that the outputs change simultaneously when instructed by the control logic. This mode of operation eliminates the output counting spikes typically associated with asynchronous (ripple clock) counters. The outputs of the four flip-flops are triggered on the low-to-high transition of either count/clock (UP or DOWN) input. The counting direction is determined by which count input is pulsed, while the other count input is held high. All four counters are fully programmable; that is, each output can be preset to any level by pulling the LOAD input low and applying the desired data to the data inputs. The outputs will follow the data inputs regardless of the count pulses. This feature allows the counter to be used as a divide-by-N counter by modifying the count length via preset inputs. Applying a high level to the clear (CLR) input forces all outputs low. The clear function is independent of the count and LOAD inputs. The UP, DOWN, and LOAD inputs are all buffered to reduce drive requirements, which significantly reduces the load or required current from clock drivers and similar circuits in long parallel word configurations. These counters are designed to cascade without external circuitry. The borrow (BO) output generates a low pulse when the count reaches zero (all Q outputs low) and the DOWN input is low. Similarly, the carry (CO) output generates a low pulse when the count reaches 15 (all Q outputs high) and the UP input is low. Counter cascading can be easily achieved by feeding BO and CO to the down-count and up-count inputs of the next-stage counter, respectively. The SN74ALS193A operates over a temperature range of 0℃ to 70℃.
Features
- Look-ahead circuitry enhances cascaded counter performance
- Fully synchronous in counting mode
- Parallel asynchronous load for modulo-N count lengths
- Asynchronous clear
- Available in multiple package options, including plastic small-outline (D), ceramic chip carrier (FK), and standard plastic (N) and ceramic (J) 300-mil DIP packages
C1547966 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |

