LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
MAXIM MAX988EUK+T product image
  • MAX988EUK+T thumbnail 1
  • MAX988EUK+T thumbnail 2
  • MAX988EUK+T thumbnail 3
  • Pinbelegung
  • Footprint
Abbildung ähnlich

MAXIM MAX988EUK+T

Hersteller
MAXIM
Herst.-Teilenr.
MAX988EUK+T
LCSC-Nr.
C143628
Verp.
SOT-23-5
Kundennummer
Hauptmerkm.
1 48uA 500uV Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Comparators RoHS
Datenblattpdf iconMAXIM MAX988EUK+T
RoHS-Konformität1 Dokumente verfügbar
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 2.141$ 2.14
10+$ 2.0966$ 20.97
30+$ 2.066$ 61.98
100+$ 2.0369$ 203.69
Standardgehäuse2500/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Linear/Comparators
HerstellerMAXIM
Verp.SOT-23-5
FeaturesBuilt-in hysteresis
Ib - Input Bias Current1nA
Output Type-
Number of Channels1
Common Mode Rejection Ratio(CMRR)-
Propagation Delay(tpd)120ns
Input Hysteresis Voltage (Vhys)2.5mV
Quiescent Current(Iq)48uA
Vos - Input Offset Voltage500uV
Output Mode-
Rail to RailRail-to-Rail Input, Rail-to-Rail Output
Operating Temperature-40℃~+85℃
Fehler meldenÄhnliche Produkte anzeigen (0) >

Beschreibung

KI-Übersetzung

The MAX987/MAX988/MAX991/MAX992/MAX995/ MAX996 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making them ideal for both 3V and 5V systems. These comparators also operate with ±1.25V to ±2.75V dual supplies. They consume only 48μA per comparator while achieving a 120ns propagation delay. Input bias current is typically 1.00A, and input offset voltage is typically 0.5mV. Internal hysteresis ensures clean output switching, even with slow-moving input signals. The output stage’s unique design limits supply-current surges while switching, virtually eliminating the supply glitches typical of many other comparators. The MAX987/ MAX991/MAX995 have a push-pull output stage that sinks as well as sources current. Large internal output drivers allow rail-to-rail output swing with loads up to 8mA. The MAX988/MAX992/MAX996 have an open-drain output stage that can be pulled beyond Vcc to 6V (max) above VEE. These open-drain versions are ideal for level translators and bipolar to single-ended converters. The single MAX987/MAX988 are available in tiny 5-pin SC70 packages, while the dual MAX991/MAX992 are available in ultra-small μMAX package.

Merkmale

KI-Übersetzung
  • 120ns Propagation Delay
  • 48μA Quiescent Supply Current
  • +2.5V to +5.5V Single-Supply Operation
  • Common-Mode Input Voltage Range Extends 250mV Beyond the Rails
  • Push-Pull Output Stage Sinks and Sources 8mA Current (MAX987/MAX991/MAX995)
  • Open-Drain Output Voltage Extends Beyond VCC (MAX988/MAX992/MAX996)
  • Unique Output Stage Reduces Output Switching Current, Minimizing Overall Power Consumption
  • 100μA Supply Current at 1MHz Switching Frequency
  • No Phase Reversal for Overdriven Inputs
  • Available in Space-Saving Packages:
    • 5-Pin SC70 (MAX987/MAX988)
    • 8-Pin μMAX (MAX991/MAX992)

Anwendungen

KI-Übersetzung
  • Portable/Battery-Powered Systems
  • Threshold Detectors/Discriminators
  • Mobile Communications
  • Ground/Supply Sensing
  • Zero-Crossing Detectors
  • IR Receivers
  • Window Comparators
  • Digital Line Receivers
  • Level Translators