RENESAS R5F563TBEDFB#V0

100-MHz 32-bit RX MCU, on-chip FPU, 165 DMIPS, Mar 31, 2016 Two 12-bit ADCs (three S/H circuits, double data registers, amplifier, comparator), one 10-bit ADC, simultaneous sampling on 7 channels using three ADCs, 100 MHz PWM (2 three-phase complementary channels +4 single-phase complementary channels or 3 three-phase complementary channels + 1 single-phase complementary channel)

• 32-bit RX CPU core
  • Max. operating frequency: 100 MHz
  • Capable of 165 DMIPS in operation at 100 MHz
  • Single precision 32-bit IEEE-754 floating point
  • Two types of multiply-and-accumulation unit (between memories and between registers)
  • 32-bit multiplier (fastest instruction execution takes one CPU clock cycle)
  • Divider (fastest instruction execution takes two CPU clock cycles)
  • Fast interrupt
  • CISC Harvard architecture with 5-stage pipeline
  • Variable-length instructions: Ultra-compact code
  • Supports the memory protection unit (MPU)
  • Two types of debugging interfaces: JTAG and FINE (two-line)
• Low-power design and architecture
  • Single 3.3-V supply or single 5-V supply; 3.3-V products can be used with a 5-V analog power supply
  • Four low-power modes
• On-chip main flash memory, no wait states
  • 100-MHz operation, 10-ns read cycle (no wait states)
  • Max. 512 Kbytes
  • User code is programmable by USB, SCI, or JTAG.
• On-chip data flash memory
  • Max. 32 Kbytes, reprogrammable up to 100,000 times
  • Programming/erasing as background operations (BGOs)
• On-chip SRAM, no wait states
  • Max. 48 Kbytes
  • For instructions and operands
• DMA
  • DMA: Incorporates four channels
  • DTC: A single unit can handle transfer on multiple channels.
• Reset and supply management
  • Power-on reset (POR)
  • Low voltage detection (LVD) with voltage settings
• Clock functions
  • External crystal oscillator or internal PLL for operation at 4 to 12.5 MHz
  • Internal 125-kHz LOCO
  • Dedicated 125-kHz LOCO for the IWDT
• Independent watchdog timer
  • 125-kHz LOCO clock operation
• Useful functions for IEC60730 compliance
  • Oscillation-stop detection, frequency measurement, CRC, IWDT, self-diagnostic function for the A/D converter, etc.
• External address space
  • 4 CS areas (4×1 Mbyte)
  • Multiplexed address data or separate address lines are selectable per area.
  • 8- or 16-bit bus space is selectable per area.
• Up to 11 communications interfaces
  • USB 2.0 full-speed function interface (1 channel)
  • CAN (compliant with ISO11898-1), incorporating 32 mailboxes (1 channel)
  • SCI with multiple functionalities (5 channels) Choose from among asynchronous mode, clock-synchronous mode, smart-card interface mode, simple SPI, simple I²C, and extended serial mode.
  • I²C bus interface for SMBus (2 channels)
  • RSPI for high-speed transfer (2 channels)
• Up to twenty 16-bit timers
  • 16-bit MTU3: 100-MHz operation, input capture, output compare, three-phase complementary PWM waveform output (2 channels), phase-counting mode (8 channels); complementary PWM does not burden the CPU.
  • 16-bit GPT: 100-MHz operation, input capture, output compare, 4-channel single-phase complementary PWM waveform output or 1-channel three-phase complementary + 1-channel single-phase complementary output, interlocking with comparator (counter operation, PWM negation control), detection of abnormal oscillation frequencies (useful for IEC60730 compliance) (8 channels); complementary PWM does not burden the CPU.
  • 16-bit CMT (4 channels)
• Generation of delays in PWM waveforms (for products with the product ID code 1)
  • The timing with which signals on the 16-bit GPT PWM output pin rise and fall can be controlled with an accuracy of up to 312 ps (in operation at 100 MHz).
• Two A/D converters for 1-MHz operation, total of 8 channels
  • Simultaneous sampling on 7 channels is possible with three units.
  • Self-diagnosis function (useful for IEC60730 compliance)
  • Two 12-bit ADCs: three sample-and-hold circuits, double data registers, amplifier, comparator (8 channels)
  • One 10-bit ADC (12 channels)
  • One 10-bit ADC (20 channels)
• 10-bit D/A converter: 2 channels
• Digital Power Supply Controller-Dedicated Calculation Function (for products with product ID code 1)
  • 16-bit fixed-point calculation function that handles compensatory calculations in the method of digital control for switched-mode power supplies.
• Register write protection function can protect values in important registers against overwriting.
• Up to 110 pins for GPIO
  • Open drain, switchable driving ability
• Operating temp. range
  • -40℃ to +85℃
  • -40℃ to +105℃