LCSC Electronics logoLCSC Electronics svg logo
Iniciar sesión
USD
Carrito
ADI LTC3210EUD-3#PBF product image
Imágenes ilustrativas

ADI LTC3210EUD-3#PBF

Fabricante
ADI
N.º de pieza fab.
LTC3210EUD-3#PBF
Nº LCSC
C684292
Emb.
TQFN-16-EP(3x3)
Número de Cliente
Atrib. clave
800kHz PWM 4 DC-DC TQFN-16-EP(3x3) LED Drivers RoHS
Hoja de DatosADI LTC3210EUD-3#PBF
Cumplimiento RoHS1 documentos disponibles
Agotado
Avisarme
Mínimo: 1Múltiplo: 1Unidad de venta: Piece
Añadir a la Lista BOM
Cant.Prec. unit.(Solo como referencia)Importo total
1+$ 2.5173$ 2.52
10+$ 2.1379$ 21.38
30+$ 1.9003$ 57.01
100+$ 1.6582$ 165.82
Encapsulado Estándar121/Full Tube
¿Mejor precio por mayor cantidad?
$

Especificaciones del Producto

Todo
TipoDescripción
CategoríaIntegrated Circuits (ICs)/Power Management (PMIC)/LED Drivers
FabricanteADI
Emb.TQFN-16-EP(3x3)
Frequency - Switching800kHz
DimmingPWM
Voltage - Input(AC)-
Number of Channels4
TypeDC-DC
Switch tube (built-in/external)-
Output Voltage-
Output Current-
Operating Temperature-40℃~+85℃
FeaturesBuilt-in soft-start;Short Circuit Protection;LED open-circuit protection;Over-Temperature Protection (OTP)
TopologyCharge Pump
Voltage - Input(DC)-
Constant Current Accuracy-
Ayuda y comentariosMostrar productos similares (0) >

Descripción

Traducción por IA

The LTC3210-2/LTC3210-3 are low noise charge pump DC/DC converters designed to drive three or four MAIN LEDs and one high current CAM LED for camera lighting. The LTC3210-2/LTC3210-3 require only four small ceramic capacitors and two current set resistors to form a complete LED power supply and current controller. Built-in soft-start circuitry prevents excessive inrush current during start-up and mode changes. High switching frequency enables the use of small external capacitors. Independent MAIN and CAM full-scale current settings are programmed by two external resistors. Shutdown mode and current output levels are selected via two logic inputs. ENM and ENC are toggled to adjust the LED currents via internal counters and DACs. A 5-bit linear DAC (32 steps) provides high resolution brightness control for the MAIN display. The charge pump optimizes efficiency based on the voltage across the LED current sources. The part powers up in 1x mode and will automatically switch to boost mode whenever any enabled LED current source begins to enter dropout. The LTC3210-2/LTC3210-3 are available in a 3mm×3mm 16-lead QFN package.

Características

Traducción por IA
  • Low Noise Charge Pump Provides High Efficiency with Automatic Mode Switching
  • Multimode Operation: 1x, 1.5x, 2x
  • Individual Full-Scale Current Set Resistors
  • Up to 500mA Total Output Current
  • Single Wire EN/Brightness Control for MAIN and CAM LEDs
  • 32:1 Linear Brightness Control Range for MAIN Display
  • Three or Four 25mA Low Dropout MAIN LED Outputs
  • One 400mA Low Dropout CAM LED Output
  • Low Noise Constant Frequency Operation
  • Low Shutdown Current: 3µA
  • Internal Soft-Start Limits Inrush Current During Startup and Mode Switching
  • Open/Short LED Protection
  • No Inductors
  • 3mm×3mm 16-Lead Plastic QFN Package

Aplicaciones

Traducción por IA
  • Multi-LED Light Supply for Cellphones/DSCs/PDAs