RENESAS R2A20112ASP#W0
| Manufacturer | |
| MPN | R2A20112ASP#W0 |
| LCSC Part # | C6749685 |
| Packaging | SOP-16 |
| Customer # | |
| Key Attributes | SOP-16 PFC (Power Factor Correction) RoHS |
| Datasheet | RENESAS R2A20112ASP#W0 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/PFC (Power Factor Correction) | |
| Manufacturer | RENESAS | |
| Packaging | SOP-16 | |
| Features | Soft-start;Overvoltage protection;Undervoltage Protection;Under-voltage lockout |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/PFC (Power Factor Correction) | |
| Manufacturer | RENESAS |
| Type | Description | |
|---|---|---|
| Packaging | SOP-16 | |
| Features | Soft-start;Overvoltage protection;Undervoltage Protection;Under-voltage lockout |
Introduction
The R2A20112A controls a boost converter to provide an active power factor correction. The R2A20112A adopts critical conduction mode for power factor correction and realizes high efficiency and a low switching noise by zero current switching. Interleaving function improves ripple current on input or output capacitor by 180 degrees phase shift. Soft-star, the feedback loop short detection, two mode over-voltage-protection, over-current-protection, Over current ON/OFF timer protection for boost Diode short and slave ZCD open detection are built in the R2A20112A, and can constitute a power supply system of high reliability with few external parts.
Features
- Boost converter control with critical conduction mode
- Interleaving control
- Soft start function for the reference voltage of Error Amp
- Two mode PFC output Over-voltage-protection Mode1: Dynamic OVP corresponding to a voltage rise by dynamic load change. Mode2: Static OVP corresponding to over-voltage in stable.
- PFC output Dynamic-under-voltage-protection (DUVP)
- Feedback loop open/short detection
- Master and Slave independence over-current-protection
- 280 μs restart timer Slave ZCD signal open detection
- Over current ON/OFF timer protection for boost Diode short
- Pb-free SOP-16
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 4.4846 | $ 4.48 |
| 200+ | $ 1.7904 | $ 358.08 |
| 500+ | $ 1.7303 | $ 865.15 |
| 1,000+ | $ 1.7003 | $ 1700.30 |
Standard Packaging2000/Full Reel | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/PFC (Power Factor Correction) | |
| Manufacturer | RENESAS | |
| Packaging | SOP-16 | |
| Features | Soft-start;Overvoltage protection;Undervoltage Protection;Under-voltage lockout |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/PFC (Power Factor Correction) | |
| Manufacturer | RENESAS |
| Type | Description | |
|---|---|---|
| Packaging | SOP-16 | |
| Features | Soft-start;Overvoltage protection;Undervoltage Protection;Under-voltage lockout |
Introduction
The R2A20112A controls a boost converter to provide an active power factor correction. The R2A20112A adopts critical conduction mode for power factor correction and realizes high efficiency and a low switching noise by zero current switching. Interleaving function improves ripple current on input or output capacitor by 180 degrees phase shift. Soft-star, the feedback loop short detection, two mode over-voltage-protection, over-current-protection, Over current ON/OFF timer protection for boost Diode short and slave ZCD open detection are built in the R2A20112A, and can constitute a power supply system of high reliability with few external parts.
Features
- Boost converter control with critical conduction mode
- Interleaving control
- Soft start function for the reference voltage of Error Amp
- Two mode PFC output Over-voltage-protection Mode1: Dynamic OVP corresponding to a voltage rise by dynamic load change. Mode2: Static OVP corresponding to over-voltage in stable.
- PFC output Dynamic-under-voltage-protection (DUVP)
- Feedback loop open/short detection
- Master and Slave independence over-current-protection
- 280 μs restart timer Slave ZCD signal open detection
- Over current ON/OFF timer protection for boost Diode short
- Pb-free SOP-16
C6749685 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |

