LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
ADI AD7993BRUZ-1 product image
Images for reference only

ADI AD7993BRUZ-1

Manufacturer
MPN
AD7993BRUZ-1
LCSC Part #
C652127
Packaging
TSSOP-16
Customer #
Key Attributes
4-Channel, 10- and 12-Bit ADCs with I2C-Compatible Interface in 16-Lead TSSOP
DatasheetADI AD7993BRUZ-1
RoHS Compliance1 documents available
Alternative Parts3
In-Stock: 8
8 In stock, ships now
Minimum: 1Multiple: 1Sales Unit: Piece
Add to BOM List
QtyUnit PriceTotal Amount
1+$ 13.7468$ 13.75
10+$ 13.0741$ 130.74
30+$ 11.9082$ 357.25
100+$ 10.891$ 1089.10
Standard Packaging96/Full Tube
Better price for more quantity?
$

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC)
ManufacturerADI
PackagingTSSOP-16
Operating Temperature-40℃~+125℃
InterfaceI2C
Quiescent Current (Iq)1uA
Voltage - Supply2.7V~5.5V
Number of Channels4
Integral non - linearity0.5LSB
Voltage ReferenceExternal
Clock/Oscillator-
Clock Frequency-
FeaturesMultiplexers;Synchronous triggering
Resolution(Bits)188kHz;10
S/N Ratio-
DNL (LSB)0.5LSB
ADC architectureSAR
Programmable GainNot supported

Introduction

AI Translation

The AD7993/AD7994 are 4-channel, 10- and 12-bit, low power, successive approximation ADCs with an I²C -compatible interface. The parts operate from a single 2.7 V to 5.5 V power supply and feature a 2 μs conversion time. The parts contain a 4-channel multiplexer and track-and-hold amplifier that can handle input frequencies up to 11 MHz. The AD7993/AD7994 provide a 2-wire serial interface that is compatible with I²C interfaces. Each part comes in two versions, AD7993-0/AD7994-0 and AD7993-1/AD7994-1, and each version allows for at least two different I²C addresses. The I²C interface on the AD7993-0/AD7994-0 supports standard and fast I²C interface modes. The I²C interface on the AD7993-1/ AD7994-1 supports standard, fast, and high speed I²C interface modes. The AD7993/AD7994 normally remain in a shutdown state while not converting, and power up only for conversions. The conversion process can be controlled using the CONVST pin, by a command mode where conversions occur across I²C write operations, or an automatic conversion interval mode selected through software control. The AD7993/AD7994 require an external reference that should be applied to the REFIN pin and can be in the range of 1.2 V to VDD. This allows the widest dynamic input range to the ADC. On-chip limit registers can be programmed with high and low limits for the conversion result, and an open-drain, out-ofrange indicator output (ALERT) becomes active when the programmed high or low limits are violated by the conversion result. This output can be used as an interrupt.

Features

AI Translation
  • 10- and 12-bit ADC with fast conversion time: 2 μs typ
  • 4 single-ended analog input channels
  • Specified for VDD of 2.7 V to 5.5 V
  • Low power consumption
  • Fast throughput rate: 188 kSPS
  • Temperature range: - 40°C to +125°C
  • Sequencer operation
  • Automatic cycle interval mode
  • I²C -compatible serial interface
  • I²C interface supports standard, fast, and high speed modes
  • Out-of-range indicator/alert function
  • Pin-selectable addressing via AS
  • Shutdown mode: 1 μA max
  • 16-lead TSSOP package

Alternative Parts

MPNManufacturerPackagingAvailabilityUnit Price
AD7993BRUZ-1REELADITSSOP-160$ 4.9932
AD7993BRUZ-0ADITSSOP-160$ 2.1425
AD7993BRUZ-0REELADITSSOP-160$ 4.7626