Crystek Corporation CVHD-950-70.000
| Manufacturer | |
| MPN | CVHD-950-70.000 |
| LCSC Part # | C6162431 |
| Packaging | SMD-4P,14.2x9.1mm |
| Customer # | |
| Key Attributes | 70MHz SMD-4P,14.2x9.1mm Oscillators RoHS |
| Datasheet | Crystek Corporation CVHD-950-70.000 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Passives/Crystals, Oscillators, Resonators/Oscillators | |
| Manufacturer | Crystek Corporation | |
| Packaging | SMD-4P,14.2x9.1mm | |
| Current - Supply | 25mA | |
| Operating Temperature | 0℃~+70℃ | |
| Frequency Stability | ±20ppm | |
| Output Type | CMOS | |
| Frequency | 70MHz | |
| Voltage - Supply | 3.3V |
| Type | Description | |
|---|---|---|
| Category | Passives/Crystals, Oscillators, Resonators/Oscillators | |
| Manufacturer | Crystek Corporation | |
| Packaging | SMD-4P,14.2x9.1mm | |
| Current - Supply | 25mA | |
| Operating Temperature | 0℃~+70℃ |
| Type | Description | |
|---|---|---|
| Frequency Stability | ±20ppm | |
| Output Type | CMOS | |
| Frequency | 70MHz | |
| Voltage - Supply | 3.3V |
Introduction
The CVHD-950 is a 40 MHz to 130 MHz CMOS voltage-controlled crystal oscillator. High-Q crystal and third-overtone technology deliver ultra-low phase noise and low jitter performance with CMOS output. The oscillator is sub-harmonic free, with a phase noise floor of -168 dBc/Hz at 3.3V DC supply voltage, operating temperature range of -40°C to +85°C, housed in a 9×14mm SMT package.
Features
- Phase noise floor of -168 dBc/Hz at 3.3V DC input voltage
- Operating temperature range -40°C to +85°C
- 9×14mm SMT package
- No sub-harmonics
- Typical power supply pushing of 1.2 ppm/V
- Typical input current 15mA, maximum 25mA
- CMOS output
- Symmetry maximum 45/55% at 50% Vdd
- Rise/fall time maximum 3 nsec at 20% to 80% Vdd
- Logic "0" maximum 10% Vdd, "1" minimum 90% Vdd
- Load 15 pF
- Maximum output current ±24mA
- Modulation bandwidth >10 kHz at -3 dB
- Input impedance 51 kΩ
- Control voltage 1.65V ± 1.65V
- Typical tuning sensitivity +25 ppm/V
- Frequency pulling minimum ±20 ppm APR (including frequency stability, calibration, and aging)
- Linearity maximum ±5%
- Typical phase jitter at 100MHz of 40 fsec (12 kHz to 20 MHz)
- Typical phase noise at 100MHz: -140 dBc/Hz at 1 kHz, -155 dBc/Hz at 10 kHz
Applications
- HDTV
- Electronic low-phase signal sources
- Test & measurement
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Passives/Crystals, Oscillators, Resonators/Oscillators | |
| Manufacturer | Crystek Corporation | |
| Packaging | SMD-4P,14.2x9.1mm | |
| Current - Supply | 25mA | |
| Operating Temperature | 0℃~+70℃ | |
| Frequency Stability | ±20ppm | |
| Output Type | CMOS | |
| Frequency | 70MHz | |
| Voltage - Supply | 3.3V |
| Type | Description | |
|---|---|---|
| Category | Passives/Crystals, Oscillators, Resonators/Oscillators | |
| Manufacturer | Crystek Corporation | |
| Packaging | SMD-4P,14.2x9.1mm | |
| Current - Supply | 25mA | |
| Operating Temperature | 0℃~+70℃ |
| Type | Description | |
|---|---|---|
| Frequency Stability | ±20ppm | |
| Output Type | CMOS | |
| Frequency | 70MHz | |
| Voltage - Supply | 3.3V |
Introduction
The CVHD-950 is a 40 MHz to 130 MHz CMOS voltage-controlled crystal oscillator. High-Q crystal and third-overtone technology deliver ultra-low phase noise and low jitter performance with CMOS output. The oscillator is sub-harmonic free, with a phase noise floor of -168 dBc/Hz at 3.3V DC supply voltage, operating temperature range of -40°C to +85°C, housed in a 9×14mm SMT package.
Features
- Phase noise floor of -168 dBc/Hz at 3.3V DC input voltage
- Operating temperature range -40°C to +85°C
- 9×14mm SMT package
- No sub-harmonics
- Typical power supply pushing of 1.2 ppm/V
- Typical input current 15mA, maximum 25mA
- CMOS output
- Symmetry maximum 45/55% at 50% Vdd
- Rise/fall time maximum 3 nsec at 20% to 80% Vdd
- Logic "0" maximum 10% Vdd, "1" minimum 90% Vdd
- Load 15 pF
- Maximum output current ±24mA
- Modulation bandwidth >10 kHz at -3 dB
- Input impedance 51 kΩ
- Control voltage 1.65V ± 1.65V
- Typical tuning sensitivity +25 ppm/V
- Frequency pulling minimum ±20 ppm APR (including frequency stability, calibration, and aging)
- Linearity maximum ±5%
- Typical phase jitter at 100MHz of 40 fsec (12 kHz to 20 MHz)
- Typical phase noise at 100MHz: -140 dBc/Hz at 1 kHz, -155 dBc/Hz at 10 kHz
Applications
- HDTV
- Electronic low-phase signal sources
- Test & measurement
C6162431 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8541600000 |
| USHTS | 8541600080 |
| TARIC | 8541600000 |
| CAHTS | 8541600010 |
| BRHTS | 85416010 |
| INHTS | 85416000 |
| MXHTS | 8541.60.01 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8541600000 |
| USHTS | 8541600080 |
| TARIC | 8541600000 |
| Type | Details |
|---|---|
| CAHTS | 8541600010 |
| BRHTS | 85416010 |
| INHTS | 85416000 |
| MXHTS | 8541.60.01 |

