onsemi NIS6452MT2TWG
| Manufacturer | |
| MPN | NIS6452MT2TWG |
| LCSC Part # | C893387 |
| Packaging | WQFN-12(2x3) |
| Customer # | |
| Key Attributes | Electronic Fuse, +3.3/+5 Volt |
| Datasheet | onsemi NIS6452MT2TWG |
| RoHS Compliance | 4 documents available |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Current Regulation/Management | |
| Manufacturer | onsemi | |
| Packaging | WQFN-12(2x3) | |
| Features | Overcurrent Protection;Short-Circuit Protection;Overvoltage clamping protection;Thermal Protection;Overload protection;Under-voltage lockout;Soft-start | |
| Voltage - Supply | 5V | |
| Operating Temperature | -40℃~+125℃ | |
| Width | 2mm | |
| FET Type | Integrated FET | |
| Trigger Current | 4.3A | |
| Length | 3mm | |
| Threshold Voltage | - | |
| Height | 0.75mm | |
| Peak Output Current(Source) | - | |
| Number of Channels | - | |
| RDS(on) | 42mΩ | |
| Peak Output Current(Sink) | 12uA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Current Regulation/Management | |
| Manufacturer | onsemi | |
| Packaging | WQFN-12(2x3) | |
| Features | Overcurrent Protection;Short-Circuit Protection;Overvoltage clamping protection;Thermal Protection;Overload protection;Under-voltage lockout;Soft-start | |
| Voltage - Supply | 5V | |
| Operating Temperature | -40℃~+125℃ | |
| Width | 2mm | |
| FET Type | Integrated FET |
| Type | Description | |
|---|---|---|
| Trigger Current | 4.3A | |
| Length | 3mm | |
| Threshold Voltage | - | |
| Height | 0.75mm | |
| Peak Output Current(Source) | - | |
| Number of Channels | - | |
| RDS(on) | 42mΩ | |
| Peak Output Current(Sink) | 12uA |
Introduction
The NIS64x2 is a cost effective, resettable fuse which can greatly enhance the reliability of a hard drive or other circuit from both catastrophic and shutdown failures. It is designed to buffer the load device from excessive input voltage which can damage sensitive circuits and to protect the input side circuitry from reverse currents. It includes an overvoltage clamp circuit that limits the output voltage during transients but does not shut the unit down, thereby allowing the load circuit to continue its operation.
Features
- 42 mΩ Typical
- Digital and Tristate Enable
- Integrated Reverse Current Protection
- Thermally Protected
- Integrated Soft−Start Circuit
- Fast Response Overvoltage Clamp Circuit
- Internal Undervoltage Lockout Circuit
- Internal Charge Pump
- Load Current Monitor Pin
- ESD Ratings: Human Body Model (HBM); 2000 V Charged Device Model (CDM); 2000 V Latch−Up; Class 1
- These Devices are Pb−Free and are RoHS Compliant
Applications
- Hard Drives
- Solid State Drives
- Mother Boards
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 1.5238 | $ 1.52 |
| 10+ | $ 1.4921 | $ 14.92 |
| 30+ | $ 1.471 | $ 44.13 |
| 100+ | $ 1.4484 | $ 144.84 |
Standard Packaging3000/Full Reel | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Current Regulation/Management | |
| Manufacturer | onsemi | |
| Packaging | WQFN-12(2x3) | |
| Features | Overcurrent Protection;Short-Circuit Protection;Overvoltage clamping protection;Thermal Protection;Overload protection;Under-voltage lockout;Soft-start | |
| Voltage - Supply | 5V | |
| Operating Temperature | -40℃~+125℃ | |
| Width | 2mm | |
| FET Type | Integrated FET | |
| Trigger Current | 4.3A | |
| Length | 3mm | |
| Threshold Voltage | - | |
| Height | 0.75mm | |
| Peak Output Current(Source) | - | |
| Number of Channels | - | |
| RDS(on) | 42mΩ | |
| Peak Output Current(Sink) | 12uA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Current Regulation/Management | |
| Manufacturer | onsemi | |
| Packaging | WQFN-12(2x3) | |
| Features | Overcurrent Protection;Short-Circuit Protection;Overvoltage clamping protection;Thermal Protection;Overload protection;Under-voltage lockout;Soft-start | |
| Voltage - Supply | 5V | |
| Operating Temperature | -40℃~+125℃ | |
| Width | 2mm | |
| FET Type | Integrated FET |
| Type | Description | |
|---|---|---|
| Trigger Current | 4.3A | |
| Length | 3mm | |
| Threshold Voltage | - | |
| Height | 0.75mm | |
| Peak Output Current(Source) | - | |
| Number of Channels | - | |
| RDS(on) | 42mΩ | |
| Peak Output Current(Sink) | 12uA |
Introduction
The NIS64x2 is a cost effective, resettable fuse which can greatly enhance the reliability of a hard drive or other circuit from both catastrophic and shutdown failures. It is designed to buffer the load device from excessive input voltage which can damage sensitive circuits and to protect the input side circuitry from reverse currents. It includes an overvoltage clamp circuit that limits the output voltage during transients but does not shut the unit down, thereby allowing the load circuit to continue its operation.
Features
- 42 mΩ Typical
- Digital and Tristate Enable
- Integrated Reverse Current Protection
- Thermally Protected
- Integrated Soft−Start Circuit
- Fast Response Overvoltage Clamp Circuit
- Internal Undervoltage Lockout Circuit
- Internal Charge Pump
- Load Current Monitor Pin
- ESD Ratings: Human Body Model (HBM); 2000 V Charged Device Model (CDM); 2000 V Latch−Up; Class 1
- These Devices are Pb−Free and are RoHS Compliant
Applications
- Hard Drives
- Solid State Drives
- Mother Boards
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8536300000 |
| USHTS | 8536308000 |
| TARIC | 8536301010 |
| CAHTS | 8536302000 |
| BRHTS | 85363090 |
| INHTS | 85363000 |
| MXHTS | 8536.30.01 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8536300000 |
| USHTS | 8536308000 |
| TARIC | 8536301010 |
| Type | Details |
|---|---|
| CAHTS | 8536302000 |
| BRHTS | 85363090 |
| INHTS | 85363000 |
| MXHTS | 8536.30.01 |



