onsemi FPF2495BUCX
| Manufacturer | |
| MPN | FPF2495BUCX |
| LCSC Part # | C891246 |
| Packaging | WLCSP-9(1.2x1.2) |
| Customer # | |
| Key Attributes | 1 2.8A Active High Load Switch WLCSP-9(1.2x1.2) Power Distribution Switches, Load Drivers |
| Datasheet | onsemi FPF2495BUCX |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | onsemi | |
| Packaging | WLCSP-9(1.2x1.2) | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse current blocking;Soft-start | |
| number of channels | 1 | |
| Maximum Continuous Current | 2.8A | |
| Control Input Logic | Active High | |
| Operating Voltage | 2.5V~5.5V | |
| RDS(on) | 70mΩ | |
| Type | Load Switch |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | onsemi | |
| Packaging | WLCSP-9(1.2x1.2) | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse current blocking;Soft-start | |
| number of channels | 1 |
| Type | Description | |
|---|---|---|
| Maximum Continuous Current | 2.8A | |
| Control Input Logic | Active High | |
| Operating Voltage | 2.5V~5.5V | |
| RDS(on) | 70mΩ | |
| Type | Load Switch |
Introduction
The FPF2495B advanced load−management switch targets applications requiring a highly integrated solution. It disconnects loads powered from the DC power rail (<6 V) with stringent off−state current targets and high load capacitances (<100 μF). The FPF2495B consists of a slew−rate controlled low−impedance MOSFET switch (100 mΩ maximum) and integrated analog features. The slew−rate controlled turn−on characteristic prevents inrush current and the resulting excessive voltage droop on power rails. FPF2495B has over−voltage protection and over−temperature protection. The FPF2495B has a Reverse−Current Blocking (RCB) function that obstructs unwanted reverse current from VOUT to VIN during OFF states. The exceptionally low off−state current drain (<2 μA maximum) facilitates compliance with standby power requirements. The input voltage range operates from 2.5 V to 5.5 VDC to support a wide range of applications in consumer, optical, medical, storage, portable, and industrial−device power management. Switch control is managed by a logic input (active HIGH) capable of interfacing directly with low−voltage control signal / General−Purpose Input / Output (GPIO) without an external pull−down resistor. The device is packaged in advanced, fully “green” compliant, 1.22 mm x 1.22 mm, Wafer−Level Chip−Scale Package (WLCSP).
Features
- VIN: 2.5 V ~ 5.5 V
- 28 V Absolute Ratings at VOUT
- Current Capability: 2.8 A
- Adjustable Current Limit: 0.05 A ~ 2.5 A (Typ.), 0.1 A ~ 2.5 A with 10% Accuracy, <0.1 A with 15% Accuracy
- RON: Typ. 70 mΩ & Max. 100 mΩ at 5 VIN and 1 A IOUT
- Output OVP: Min. = 5.6 V, Typ. = 5.8 V, Max. = 6 V
- No Output Discharge During Off State
- Open−Drain OCP on FLAGB
- Thermal Shutdown
- Under−Voltage Lockout (UVLO)
- Reverse−Current Blocking (RCB) during OFF
- Logic CMOS IO Meets JESD76 Standard for GPIO Interface and Related Power Supply Requirements
- ESD Protected: Human Body Model: >2 kV, Charged Device Model: >2.5 kV, IEC 61000−4−2 Air Discharge: >15 kV, IEC 61000−4−2 Contact Discharge: >8 kV
Applications
- Smart Phones, Tablet PCs
- Storage, DSLR, and Portable Devices
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 0.4163 | $ 0.42 |
| 10+ | $ 0.3284 | $ 3.28 |
| 30+ | $ 0.2914 | $ 8.74 |
| 100+ | $ 0.2436 | $ 24.36 |
| 500+ | $ 0.2221 | $ 111.05 |
| 1,000+ | $ 0.2097 | $ 209.70 |
Standard Packaging3000/Full Reel | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | onsemi | |
| Packaging | WLCSP-9(1.2x1.2) | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse current blocking;Soft-start | |
| number of channels | 1 | |
| Maximum Continuous Current | 2.8A | |
| Control Input Logic | Active High | |
| Operating Voltage | 2.5V~5.5V | |
| RDS(on) | 70mΩ | |
| Type | Load Switch |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | onsemi | |
| Packaging | WLCSP-9(1.2x1.2) | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse current blocking;Soft-start | |
| number of channels | 1 |
| Type | Description | |
|---|---|---|
| Maximum Continuous Current | 2.8A | |
| Control Input Logic | Active High | |
| Operating Voltage | 2.5V~5.5V | |
| RDS(on) | 70mΩ | |
| Type | Load Switch |
Introduction
The FPF2495B advanced load−management switch targets applications requiring a highly integrated solution. It disconnects loads powered from the DC power rail (<6 V) with stringent off−state current targets and high load capacitances (<100 μF). The FPF2495B consists of a slew−rate controlled low−impedance MOSFET switch (100 mΩ maximum) and integrated analog features. The slew−rate controlled turn−on characteristic prevents inrush current and the resulting excessive voltage droop on power rails. FPF2495B has over−voltage protection and over−temperature protection. The FPF2495B has a Reverse−Current Blocking (RCB) function that obstructs unwanted reverse current from VOUT to VIN during OFF states. The exceptionally low off−state current drain (<2 μA maximum) facilitates compliance with standby power requirements. The input voltage range operates from 2.5 V to 5.5 VDC to support a wide range of applications in consumer, optical, medical, storage, portable, and industrial−device power management. Switch control is managed by a logic input (active HIGH) capable of interfacing directly with low−voltage control signal / General−Purpose Input / Output (GPIO) without an external pull−down resistor. The device is packaged in advanced, fully “green” compliant, 1.22 mm x 1.22 mm, Wafer−Level Chip−Scale Package (WLCSP).
Features
- VIN: 2.5 V ~ 5.5 V
- 28 V Absolute Ratings at VOUT
- Current Capability: 2.8 A
- Adjustable Current Limit: 0.05 A ~ 2.5 A (Typ.), 0.1 A ~ 2.5 A with 10% Accuracy, <0.1 A with 15% Accuracy
- RON: Typ. 70 mΩ & Max. 100 mΩ at 5 VIN and 1 A IOUT
- Output OVP: Min. = 5.6 V, Typ. = 5.8 V, Max. = 6 V
- No Output Discharge During Off State
- Open−Drain OCP on FLAGB
- Thermal Shutdown
- Under−Voltage Lockout (UVLO)
- Reverse−Current Blocking (RCB) during OFF
- Logic CMOS IO Meets JESD76 Standard for GPIO Interface and Related Power Supply Requirements
- ESD Protected: Human Body Model: >2 kV, Charged Device Model: >2.5 kV, IEC 61000−4−2 Air Discharge: >15 kV, IEC 61000−4−2 Contact Discharge: >8 kV
Applications
- Smart Phones, Tablet PCs
- Storage, DSLR, and Portable Devices
C891246 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| ECCN | - |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |
| Type | Details |
|---|---|
| ECCN | - |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| Type | Details |
|---|---|
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |