SANKEN SLA7070MPR
| Manufacturer | |
| MPN | SLA7070MPR |
| LCSC Part # | C7364124 |
| Packaging | ZIP-23 |
| Customer # | |
| Key Attributes | ZIP-23 Motor Drivers, Controllers RoHS |
| Datasheet | SANKEN SLA7070MPR |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | SANKEN | |
| Packaging | ZIP-23 | |
| Drive Type | Unipolar Drive | |
| Number of H-bridges | - | |
| Features | Motor step-out prevention function;Power-on reset;Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Dead-time / shoot-through protection | |
| Technology | Yes | |
| Interface | - | |
| Operating Temperature | - | |
| Step Resolution | 2 | |
| Output Current | 1A | |
| Control Voltage | 3V~5.5V | |
| RDS(on) | 700mΩ | |
| Motor Drive Voltage(Vm) | - |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | SANKEN | |
| Packaging | ZIP-23 | |
| Drive Type | Unipolar Drive | |
| Number of H-bridges | - | |
| Features | Motor step-out prevention function;Power-on reset;Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Dead-time / shoot-through protection | |
| Technology | Yes |
| Type | Description | |
|---|---|---|
| Interface | - | |
| Operating Temperature | - | |
| Step Resolution | 2 | |
| Output Current | 1A | |
| Control Voltage | 3V~5.5V | |
| RDS(on) | 700mΩ | |
| Motor Drive Voltage(Vm) | - |
Introduction
The SLA7070MPRT series are unipolar 2-phase stepping motor driver ICs. The SLA7070MPRT series employs a clock input method as a control signal input method, enabling full control of the device operation using only a few signal lines, instead of the conventional phase input method that requires about 10 signal lines. This allows simplification of the circuit design and a reduced workload on the control microprocessor. In addition, the SLA7070MPRT series is improved in its reliability by preventing the IC from damage due to abnormal conditions. For example, it has a flag output terminal to signal that a protection circuit has operated. The series also has a built-in protection circuitry against motor coil opens/shorts and thermal shutdown protection as well. All the SLA7070MPRT series ICs are compatible in their pin layouts and interface specifications, allowing customers the flexibility of choosing the IC that is optimal for the target equipment characteristics.
Features
- Power supply voltages, VBB: 46 V (max.), 10 to 44 V normal operating range
- Logic supply voltages, VDD: 3.0 to 5.5 V
- Maximum output currents: 1 A, 1.5 A, 2 A, 3 A
- Built-in sequencer
- Full-, half-, and microstepping available (microstepping options are capable of full-, half-, quarter-, eighth-, and sixteenth-stepping
- Built-in sense resistor, RSInt
- All variants are pin-compatible for enhanced design flexibility
- ZIP type 23-pin molded package (SLA package)
- Self-excitation PWM current control with fixed off-time (microstepping options off-time adjusted automatically by step reference current ratio; 3 levels)
- Built-in synchronous rectifying circuit reduces losses at PWM-off
- Synchronous PWM chopping function prevents motor noise in Hold mode
- Sleep mode for reducing the IC input current in stand-by state
- Built-in protection circuitry against motor coil opens/shorts and thermal shutdown protection options
Applications
- LBPs, PPCs, ATMs, industrial robots, and so forth
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 14.6828 | $ 14.68 |
| 180+ | $ 5.8586 | $ 1054.55 |
| 540+ | $ 5.6631 | $ 3058.07 |
| 1,080+ | $ 5.5661 | $ 6011.39 |
Standard Packaging180/Full Tube | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | SANKEN | |
| Packaging | ZIP-23 | |
| Drive Type | Unipolar Drive | |
| Number of H-bridges | - | |
| Features | Motor step-out prevention function;Power-on reset;Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Dead-time / shoot-through protection | |
| Technology | Yes | |
| Interface | - | |
| Operating Temperature | - | |
| Step Resolution | 2 | |
| Output Current | 1A | |
| Control Voltage | 3V~5.5V | |
| RDS(on) | 700mΩ | |
| Motor Drive Voltage(Vm) | - |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | SANKEN | |
| Packaging | ZIP-23 | |
| Drive Type | Unipolar Drive | |
| Number of H-bridges | - | |
| Features | Motor step-out prevention function;Power-on reset;Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Dead-time / shoot-through protection | |
| Technology | Yes |
| Type | Description | |
|---|---|---|
| Interface | - | |
| Operating Temperature | - | |
| Step Resolution | 2 | |
| Output Current | 1A | |
| Control Voltage | 3V~5.5V | |
| RDS(on) | 700mΩ | |
| Motor Drive Voltage(Vm) | - |
Introduction
The SLA7070MPRT series are unipolar 2-phase stepping motor driver ICs. The SLA7070MPRT series employs a clock input method as a control signal input method, enabling full control of the device operation using only a few signal lines, instead of the conventional phase input method that requires about 10 signal lines. This allows simplification of the circuit design and a reduced workload on the control microprocessor. In addition, the SLA7070MPRT series is improved in its reliability by preventing the IC from damage due to abnormal conditions. For example, it has a flag output terminal to signal that a protection circuit has operated. The series also has a built-in protection circuitry against motor coil opens/shorts and thermal shutdown protection as well. All the SLA7070MPRT series ICs are compatible in their pin layouts and interface specifications, allowing customers the flexibility of choosing the IC that is optimal for the target equipment characteristics.
Features
- Power supply voltages, VBB: 46 V (max.), 10 to 44 V normal operating range
- Logic supply voltages, VDD: 3.0 to 5.5 V
- Maximum output currents: 1 A, 1.5 A, 2 A, 3 A
- Built-in sequencer
- Full-, half-, and microstepping available (microstepping options are capable of full-, half-, quarter-, eighth-, and sixteenth-stepping
- Built-in sense resistor, RSInt
- All variants are pin-compatible for enhanced design flexibility
- ZIP type 23-pin molded package (SLA package)
- Self-excitation PWM current control with fixed off-time (microstepping options off-time adjusted automatically by step reference current ratio; 3 levels)
- Built-in synchronous rectifying circuit reduces losses at PWM-off
- Synchronous PWM chopping function prevents motor noise in Hold mode
- Sleep mode for reducing the IC input current in stand-by state
- Built-in protection circuitry against motor coil opens/shorts and thermal shutdown protection options
Applications
- LBPs, PPCs, ATMs, industrial robots, and so forth
C7364124 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS Compliant |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | ROHS Compliant |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |