LCSC Electronics logoLCSC Electronics svg logo
Connexion
USD
ADI LTC3602IFE#TRPBF product image
Photos non contractuelles

ADI LTC3602IFE#TRPBF

Fabricant
Réf. Fab.
LTC3602IFE#TRPBF
Réf. LCSC
C685162
Condit.
TSSOP-16-EP
Numéro Client
Caract. clés
1MHz Step-down type Adjustable 2.5A 600mV~9.5V TSSOP-16-EP Voltage Regulators - DC DC Switching Regulators RoHS
Fiche TechniqueADI LTC3602IFE#TRPBF
Conformité RoHS1 documents disponibles
Pièces alternatives3
Rupture de stock
M'avertir
Minimum: 1Multiple: 1Unité de vente: Piece
Ajouter à la Liste BOM
QtéPrix unit.(Référence uniquement)Montant total
1+$ 8.7762$ 8.78
200+$ 3.3972$ 679.44
500+$ 3.2784$ 1639.20
1,000+$ 3.2182$ 3218.20
Boîtier Standard2500/Full Reel
Meilleur prix pour une plus grande quantité ?
$

Spécifications du Produit

Tout
TypeDescription
CatégorieIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
FabricantADI
Condit.TSSOP-16-EP
Operating Temperature-40℃~+85℃@(TA)
Frequency - Switching1MHz
FunctionStep-down type
Number of Outputs1
FeaturesFrequency synchronization;Operating status indication;Light load efficient mode;Adjustable soft-start;Output voltage tracking;Built-in LDO regulator
Output TypeAdjustable
TopologyBuck
Operating Voltage4.5V~10V
Switch tube (built-in/external)Built-in
Output Current2.5A
Output Voltage600mV~9.5V
Quiescent Current75uA

Description

Traduction par IA

The LTC3602 is a high efficiency, monolithic synchronous, step-down DC/DC converter utilizing a constant-frequency, current mode architecture. It operates from an input voltage range of 4.5V to 10V and provides an adjustable regulated output voltage from 0.6V to 9.5V while delivering up to 2.5A of output current. The internal synchronous power switch with 65mΩ on-resistance increases efficiency and eliminates the need for an external Schottky diode. The switching frequency can either be set by an external resistor or synchronized to an external clock. OPTI-LOOP compensation allows the transient response to be optimized over a wide range of loads and output capacitors. The LTC3602 can be configured for either Burst Mode operation or forced continuous operation. Forced continuous operation reduces noise and RF interference, while Burst Mode operation provides the high efficiency at light loads. In Burst Mode operation, external control of the burst clamp level allows the output voltage ripple to be adjusted according to the requirements of the application.

Caractéristiques

Traduction par IA
  • Wide Input Voltage Range: 4.5V to 10V
  • 2.5A Output Current
  • Low RDS(ON) Internal Switches: 65mΩ and 90mΩ
  • Programmable Frequency: 300kHz to 3MHz
  • Low Quiescent Current: 75μA
  • 0.6V±1% Reference Allows Low Output Voltage
  • 99% Maximum Duty Cycle
  • Adjustable Burst Mode Clamp
  • Synchronizable to External Clock
  • Power Good Output Voltage Monitor
  • Overtemperature Protection
  • Available in 16-Lead Exposed TSSOP and 4mm × 4mm QFN Packages

Applications

Traduction par IA
  • Point-of-Load Supplies
  • Portable Instruments
  • Server Backplane Power
  • Battery-Powered Devices

Pièces alternatives

MPNFabricantConditionnementDisponibilitéPrix unitaire
LTC3602EFE#PBFADITSSOP-16-EP0$ 7.7191
LTC3602EFE#TRPBFADITSSOP-16-EP0$ 7.5152
LTC3602IFE#PBFADITSSOP-16-EP0$ 8.7762