LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

MICROCHIP MCP48FEB12-E/UN

Manufacturer
MPN
MCP48FEB12-E/UN
LCSC Part #
C636224
Packaging
MSOP-10
Customer #
Key Attributes
MCP48FEBXX 8-/10-/12bit Single/Dual Voltage Output Nonvolatile Digital-to-Analog Converters
DatasheetMICROCHIP MCP48FEB12-E/UN
RoHS Compliance2 documents available
Alternative Parts5
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Data Acquisition/Digital to Analog Converters (DAC)
ManufacturerMICROCHIP
PackagingMSOP-10
Settling Time7.8us
Quiescent Current (Iq)650nA
Operating Temperature-40℃~+125℃
Voltage - Supply1.8V~5.5V
FunctionIntegrated buffer;Built-in reference source;Programmable gain;Power-on reset;Power-down mode
Integral non - linearity0.4LSB;0.05LSB
Number of Channels2
Resolution (Bits)10;-
Interface TypeSPI

Introduction

AI Translation

The MCP48FEBXX are Single- and Dual-channel 8-bit, 10-bit, and 12-bit buffered voltage output Digital-to-Analog Converters (DAC) with nonvolatile memory and an SPI serial interface. The VREF pin, the device VDD or the internal band gap voltage can be selected as the DAC’s reference voltage. When VDD is selected, VDD is connected internally to the DAC reference circuit. When the VREF pin is used, the user can select the output buffer’s gain to be 1 or 2. When the gain is 2, the VREF pin voltage should be limited to a maximum of VDD/2. These devices have an SPI-compatible serial interface. Write commands are supported up to 20 MHz while read commands are supported up to 10 MHz.

Features

AI Translation
  • Operating Voltage Range: - 2.7V to 5.5V - full specifications - 1.8V to 2.7V - reduced device specifications
  • Output Voltage Resolutions: - 8-bit: MCP48FEB0X (256 Steps) - 10-bit: MCP48FEB1X (1024 Steps) - 12-bit: MCP48FEB2X (4096 Steps)
  • Rail-to-Rail Output
  • Fast Settling Time of 7.8 µs (typical)
  • DAC Voltage Reference Source Options: - Device VDD - External VREF pin (buffered or unbuffered) - Internal Band Gap (1.22V typical)
  • Output Gain Options: - Unity (1x) - 2x
  • Nonvolatile Memory (EEPROM): - User-programmed Power-on Reset (POR)/Brown-out Reset (BOR) output setting, recall and device configuration bits - Auto Recall of Saved DAC register setting - Auto Recall of Saved Device Configuration (Voltage Reference, Gain, Power-Down)
  • Power-on/Brown-out Reset Protection
  • Power-Down Modes: - Disconnects output buffer (High Impedance) - Selection of VOUT pull-down resistors (100 kΩ or 1 kΩ)
  • Low Power Consumption: - Normal operation: <180 μA (Single), 380 μA (Dual) - Power-down operation: 650 nA typical - EEPROM write cycle (1.9 mA maximum)
  • SPI Interface: - Supports 0 and 11 modes - Up to 20 MHz writes and 10 MHz reads - Input buffers support interfacing to low-voltage digital devices
  • Package Types: 10-lead MSOP
  • Extended Temperature Range: -40°C to +125°C

Applications

AI Translation
  • Set Point or Offset Trimming
  • Sensor Calibration
  • Low-Power Portable Instrumentation
  • PC Peripherals
  • Data Acquisition Systems
  • Motor Control