MAXIM MAX2374EBT
| Manufacturer | |
| MPN | MAX2374EBT |
| LCSC Part # | C3189943 |
| Packaging | UCSP-6(1.1x1.6) |
| Customer # | |
| Key Attributes | 15dB 2.7V~5.5V 1.5dB 6dBm 8.5mA UCSP-6(1.1x1.6) RF Amplifiers |
| Datasheet | MAXIM MAX2374EBT |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | RF and Wireless/RF Amplifiers | |
| Manufacturer | MAXIM | |
| Packaging | UCSP-6(1.1x1.6) | |
| Operating Temperature | -40℃~+85℃ | |
| Gain | 15dB | |
| Input Return Loss | 14dB | |
| Voltage - Supply | 2.7V~5.5V | |
| Frequency Range | - | |
| Noise Figure | 1.5dB | |
| Output Return Loss | 14dB | |
| Features | Variable gain control;Low-power mode | |
| IP3 | 6.2dBm | |
| P1dB | 6dBm | |
| Current - Supply | 8.5mA |
| Type | Description | |
|---|---|---|
| Category | RF and Wireless/RF Amplifiers | |
| Manufacturer | MAXIM | |
| Packaging | UCSP-6(1.1x1.6) | |
| Operating Temperature | -40℃~+85℃ | |
| Gain | 15dB | |
| Input Return Loss | 14dB | |
| Voltage - Supply | 2.7V~5.5V |
| Type | Description | |
|---|---|---|
| Frequency Range | - | |
| Noise Figure | 1.5dB | |
| Output Return Loss | 14dB | |
| Features | Variable gain control;Low-power mode | |
| IP3 | 6.2dBm | |
| P1dB | 6dBm | |
| Current - Supply | 8.5mA |
Introduction
The MAX2374 silicon-germanium (SiGe), switchable gain, variable-linearity, low-noise amplifier (LNA) is designed for cellular-band, code-division multiple access (CDMA). It can be used for applications such as TDMA and PDC or wherever high dynamic range and low noise are required. This LNA provides a high intermodulation intercept point (IIP3), which is adjustable to meet specific system requirements by selecting an appropriate external resistor. To achieve high gain and low noise, the LNA is packaged in a tiny ultra-chip-scale package (UCSP) with six solder bumps. The LNA operates from a +2.7V to +5.5V single supply and consumes just 8.5mA while achieving a +6.2 dBm input IIP3. Supply current reduces to less than 1μA in shutdown mode. The MAX2374 provides two gain modes. High-gain mode optimizes system sensitivity, while low-gain mode optimizes system linearity.
Features
- +2.7V to +5.5V Single Supply
- Low Operating Current: 8.5mA for High Linearity, 4.5mA for Paging, 4.1mA in Low-Gain, High-Linearity Mode
- Low Noise Figure: 1.5dB Cellular
- Adjustable IIP3
- Two Gain Settings
- <1μA Shutdown Mode
- Ultra-Small 6-Bump UCSP (1mm x 1.5mm)
Applications
- CDMA Phones
- TDMA Phones
- Wireless Local Loop (WLL)
- GSM Handsets
- Land Mobile Radio
- Wireless Data
Products Specifications
| Type | Description | |
|---|---|---|
| Category | RF and Wireless/RF Amplifiers | |
| Manufacturer | MAXIM | |
| Packaging | UCSP-6(1.1x1.6) | |
| Operating Temperature | -40℃~+85℃ | |
| Gain | 15dB | |
| Input Return Loss | 14dB | |
| Voltage - Supply | 2.7V~5.5V | |
| Frequency Range | - | |
| Noise Figure | 1.5dB | |
| Output Return Loss | 14dB | |
| Features | Variable gain control;Low-power mode | |
| IP3 | 6.2dBm | |
| P1dB | 6dBm | |
| Current - Supply | 8.5mA |
| Type | Description | |
|---|---|---|
| Category | RF and Wireless/RF Amplifiers | |
| Manufacturer | MAXIM | |
| Packaging | UCSP-6(1.1x1.6) | |
| Operating Temperature | -40℃~+85℃ | |
| Gain | 15dB | |
| Input Return Loss | 14dB | |
| Voltage - Supply | 2.7V~5.5V |
| Type | Description | |
|---|---|---|
| Frequency Range | - | |
| Noise Figure | 1.5dB | |
| Output Return Loss | 14dB | |
| Features | Variable gain control;Low-power mode | |
| IP3 | 6.2dBm | |
| P1dB | 6dBm | |
| Current - Supply | 8.5mA |
Introduction
The MAX2374 silicon-germanium (SiGe), switchable gain, variable-linearity, low-noise amplifier (LNA) is designed for cellular-band, code-division multiple access (CDMA). It can be used for applications such as TDMA and PDC or wherever high dynamic range and low noise are required. This LNA provides a high intermodulation intercept point (IIP3), which is adjustable to meet specific system requirements by selecting an appropriate external resistor. To achieve high gain and low noise, the LNA is packaged in a tiny ultra-chip-scale package (UCSP) with six solder bumps. The LNA operates from a +2.7V to +5.5V single supply and consumes just 8.5mA while achieving a +6.2 dBm input IIP3. Supply current reduces to less than 1μA in shutdown mode. The MAX2374 provides two gain modes. High-gain mode optimizes system sensitivity, while low-gain mode optimizes system linearity.
Features
- +2.7V to +5.5V Single Supply
- Low Operating Current: 8.5mA for High Linearity, 4.5mA for Paging, 4.1mA in Low-Gain, High-Linearity Mode
- Low Noise Figure: 1.5dB Cellular
- Adjustable IIP3
- Two Gain Settings
- <1μA Shutdown Mode
- Ultra-Small 6-Bump UCSP (1mm x 1.5mm)
Applications
- CDMA Phones
- TDMA Phones
- Wireless Local Loop (WLL)
- GSM Handsets
- Land Mobile Radio
- Wireless Data
C3189943 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
| Type | Details |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |