TI CDC2351QDBR
| Manufacturer | |
| MPN | CDC2351QDBR |
| LCSC Part # | C2672990 |
| Packaging | SSOP-24-208mil |
| Customer # | |
| Key Attributes | 3V~3.6V 100MHz 10 SSOP-24-208mil Clock Buffers, Drivers RoHS |
| Datasheet | TI CDC2351QDBR |
| RoHS Compliance | 1 documents available |
| Alternative Parts | 4 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Clock/Timing/Clock Buffers, Drivers | |
| Manufacturer | TI | |
| Packaging | SSOP-24-208mil | |
| Operating Temperature | -40℃~+125℃ | |
| Voltage - Supply | 3V~3.6V | |
| Features | Multi-channel fan-out/isolation drive;Output enable/shutdown;Internal termination and bias network | |
| Number of Inputs | 1 | |
| Output Frequency(Max) | 100MHz | |
| Number of outputs | 10 |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Clock/Timing/Clock Buffers, Drivers | |
| Manufacturer | TI | |
| Packaging | SSOP-24-208mil | |
| Operating Temperature | -40℃~+125℃ | |
| Voltage - Supply | 3V~3.6V |
| Type | Description | |
|---|---|---|
| Features | Multi-channel fan-out/isolation drive;Output enable/shutdown;Internal termination and bias network | |
| Number of Inputs | 1 | |
| Output Frequency(Max) | 100MHz | |
| Number of outputs | 10 |
Introduction
The CDC2351 is a high-performance clock driver that distributes 1 input (A) to 10 outputs (Y) for low-skew clock distribution. The output enable (OE) input disables the outputs to a high-impedance state. Each output features a built-in series damping resistor to improve signal integrity at the load. The CDC2351 operates at a nominal supply voltage of 3.3 V VCC. Propagation delay is factory-trimmed via the P0 and P1 pins to ensure minimum part-to-part skew within the specified range. The P0 and P1 pins are not available for customer use and should be connected to GND. The CDC2351 operates over a temperature range of 0°C to 70°C. The CDC2351Q operates over the full automotive temperature range of –40°C to 125°C.
Features
- Low output skew
- Low pulse skew
- 3.3 V VCC operating voltage
- LVTTL-compatible I/O
- Mixed-mode signal operation support (5 V I/O voltage at 3.3 V VCC)
- 1-to-10 clock distribution
- Built-in series damping resistors on outputs for reduced transmission line effects
- Distributed VCC and ground pins for reduced switching noise
- EPIC-IIB BiCMOS design for significantly reduced power consumption
- Available in plastic small-outline (DW) and shrink small-outline (DB) packages
- Q-Temp automotive high-reliability configuration available with automotive qualification
Applications
- Clock distribution
- Clock generation
- Automotive high-reliability applications
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Clock/Timing/Clock Buffers, Drivers | |
| Manufacturer | TI | |
| Packaging | SSOP-24-208mil | |
| Operating Temperature | -40℃~+125℃ | |
| Voltage - Supply | 3V~3.6V | |
| Features | Multi-channel fan-out/isolation drive;Output enable/shutdown;Internal termination and bias network | |
| Number of Inputs | 1 | |
| Output Frequency(Max) | 100MHz | |
| Number of outputs | 10 |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Clock/Timing/Clock Buffers, Drivers | |
| Manufacturer | TI | |
| Packaging | SSOP-24-208mil | |
| Operating Temperature | -40℃~+125℃ | |
| Voltage - Supply | 3V~3.6V |
| Type | Description | |
|---|---|---|
| Features | Multi-channel fan-out/isolation drive;Output enable/shutdown;Internal termination and bias network | |
| Number of Inputs | 1 | |
| Output Frequency(Max) | 100MHz | |
| Number of outputs | 10 |
Introduction
The CDC2351 is a high-performance clock driver that distributes 1 input (A) to 10 outputs (Y) for low-skew clock distribution. The output enable (OE) input disables the outputs to a high-impedance state. Each output features a built-in series damping resistor to improve signal integrity at the load. The CDC2351 operates at a nominal supply voltage of 3.3 V VCC. Propagation delay is factory-trimmed via the P0 and P1 pins to ensure minimum part-to-part skew within the specified range. The P0 and P1 pins are not available for customer use and should be connected to GND. The CDC2351 operates over a temperature range of 0°C to 70°C. The CDC2351Q operates over the full automotive temperature range of –40°C to 125°C.
Features
- Low output skew
- Low pulse skew
- 3.3 V VCC operating voltage
- LVTTL-compatible I/O
- Mixed-mode signal operation support (5 V I/O voltage at 3.3 V VCC)
- 1-to-10 clock distribution
- Built-in series damping resistors on outputs for reduced transmission line effects
- Distributed VCC and ground pins for reduced switching noise
- EPIC-IIB BiCMOS design for significantly reduced power consumption
- Available in plastic small-outline (DW) and shrink small-outline (DB) packages
- Q-Temp automotive high-reliability configuration available with automotive qualification
Applications
- Clock distribution
- Clock generation
- Automotive high-reliability applications
C2672990 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |