TI INA381A4IDSGR
| Manufacturer | |
| MPN | INA381A4IDSGR |
| LCSC Part # | C2155685 |
| Packaging | WSON-8(2x2) |
| Customer # | |
| Key Attributes | -200mV~26V 105kHz 200V/V 500uV 80uA 1 WSON-8(2x2) Current Regulation/Management RoHS |
| Datasheet | TI INA381A4IDSGR |
| RoHS Compliance | 2 documents available |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Current Regulation/Management | |
| Manufacturer | TI | |
| Packaging | WSON-8(2x2) | |
| Features | Built-in comparator;Zero drift / auto-zero;High-side detection;Low-side detection;Analog output interface;Programmable threshold alarm;External shunt | |
| Vcm - Common Mode Voltage | -200mV~26V | |
| Output Current | - | |
| Bandwidth | 105kHz | |
| Input Voltage (Vin) | 2.7V~5.5V | |
| Operating Temperature | -40℃~+125℃ | |
| Gain | 200V/V | |
| Common Mode Rejection Ratio(CMRR) | 100dB | |
| Quiescent Current | 250uA | |
| Vos - Input Offset Voltage | 500uV | |
| Ib - Input Bias Current | 80uA | |
| Number of Channels | 1 | |
| Differential Voltage | ±26V | |
| Input Offset Voltage Drift(Vos TC) | 1uV/℃ |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Current Regulation/Management | |
| Manufacturer | TI | |
| Packaging | WSON-8(2x2) | |
| Features | Built-in comparator;Zero drift / auto-zero;High-side detection;Low-side detection;Analog output interface;Programmable threshold alarm;External shunt | |
| Vcm - Common Mode Voltage | -200mV~26V | |
| Output Current | - | |
| Bandwidth | 105kHz | |
| Input Voltage (Vin) | 2.7V~5.5V | |
| Operating Temperature | -40℃~+125℃ |
| Type | Description | |
|---|---|---|
| Gain | 200V/V | |
| Common Mode Rejection Ratio(CMRR) | 100dB | |
| Quiescent Current | 250uA | |
| Vos - Input Offset Voltage | 500uV | |
| Ib - Input Bias Current | 80uA | |
| Number of Channels | 1 | |
| Differential Voltage | ±26V | |
| Input Offset Voltage Drift(Vos TC) | 1uV/℃ |
Introduction
The INA381 includes a 26V common-mode current-sensing amplifier and a high-speed comparator. The device detects overcurrent conditions by measuring the voltage across a shunt resistor and comparing this voltage with a user-defined threshold limit (set via the comparator reference pin). This current shunt monitor can measure differential voltage signals over a common-mode voltage range of –0.2V to 26V, independent of the supply voltage. The open-drain alert output can be configured to operate in two modes: transparent or latched. In transparent mode, the output state follows the input state. In latched mode, the alert output clears only when the latch is reset. The large-signal alert response time of the independent comparator is less than 2μs, enabling fast detection of overcurrent events. The total system overcurrent protection response time provided by the INA381 is less than 10µs. The device is powered by a single 2.7V to 5.5V supply and consumes a maximum supply current of 350μA. The device has an operating temperature range of -40°C to +125°C and is available in 8-pin and 10-pin VSSOP packages.
Features
- Common-mode input range: -0.2V to +26V
- High-precision amplifier:
- Offset voltage at TA=25°C:
- 500μV (max) at VCM=12V
- 150μV (max) at VCM=0V
- Offset voltage drift: 1μV/°C (max)
- Gain error: 1% (max) at 25°C
- Gain error drift: 20ppm/°C (max)
- Available amplifier gain:
- INA381A3: 100V/V
- Open-drain comparator:
- Hysteresis: 50mV
- Propagation delay: 400ns (typical)
- Alert threshold set via external reference voltage
- Transparent and latch modes supported
Applications
- Commercial networking and server PSU
- Commercial DC/DC converters
- DC input BLDC motor drivers
- Cordless power tools
- Headsets, headphones, and earbuds
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Current Regulation/Management | |
| Manufacturer | TI | |
| Packaging | WSON-8(2x2) | |
| Features | Built-in comparator;Zero drift / auto-zero;High-side detection;Low-side detection;Analog output interface;Programmable threshold alarm;External shunt | |
| Vcm - Common Mode Voltage | -200mV~26V | |
| Output Current | - | |
| Bandwidth | 105kHz | |
| Input Voltage (Vin) | 2.7V~5.5V | |
| Operating Temperature | -40℃~+125℃ | |
| Gain | 200V/V | |
| Common Mode Rejection Ratio(CMRR) | 100dB | |
| Quiescent Current | 250uA | |
| Vos - Input Offset Voltage | 500uV | |
| Ib - Input Bias Current | 80uA | |
| Number of Channels | 1 | |
| Differential Voltage | ±26V | |
| Input Offset Voltage Drift(Vos TC) | 1uV/℃ |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Current Regulation/Management | |
| Manufacturer | TI | |
| Packaging | WSON-8(2x2) | |
| Features | Built-in comparator;Zero drift / auto-zero;High-side detection;Low-side detection;Analog output interface;Programmable threshold alarm;External shunt | |
| Vcm - Common Mode Voltage | -200mV~26V | |
| Output Current | - | |
| Bandwidth | 105kHz | |
| Input Voltage (Vin) | 2.7V~5.5V | |
| Operating Temperature | -40℃~+125℃ |
| Type | Description | |
|---|---|---|
| Gain | 200V/V | |
| Common Mode Rejection Ratio(CMRR) | 100dB | |
| Quiescent Current | 250uA | |
| Vos - Input Offset Voltage | 500uV | |
| Ib - Input Bias Current | 80uA | |
| Number of Channels | 1 | |
| Differential Voltage | ±26V | |
| Input Offset Voltage Drift(Vos TC) | 1uV/℃ |
Introduction
The INA381 includes a 26V common-mode current-sensing amplifier and a high-speed comparator. The device detects overcurrent conditions by measuring the voltage across a shunt resistor and comparing this voltage with a user-defined threshold limit (set via the comparator reference pin). This current shunt monitor can measure differential voltage signals over a common-mode voltage range of –0.2V to 26V, independent of the supply voltage. The open-drain alert output can be configured to operate in two modes: transparent or latched. In transparent mode, the output state follows the input state. In latched mode, the alert output clears only when the latch is reset. The large-signal alert response time of the independent comparator is less than 2μs, enabling fast detection of overcurrent events. The total system overcurrent protection response time provided by the INA381 is less than 10µs. The device is powered by a single 2.7V to 5.5V supply and consumes a maximum supply current of 350μA. The device has an operating temperature range of -40°C to +125°C and is available in 8-pin and 10-pin VSSOP packages.
Features
- Common-mode input range: -0.2V to +26V
- High-precision amplifier:
- Offset voltage at TA=25°C:
- 500μV (max) at VCM=12V
- 150μV (max) at VCM=0V
- Offset voltage drift: 1μV/°C (max)
- Gain error: 1% (max) at 25°C
- Gain error drift: 20ppm/°C (max)
- Available amplifier gain:
- INA381A3: 100V/V
- Open-drain comparator:
- Hysteresis: 50mV
- Propagation delay: 400ns (typical)
- Alert threshold set via external reference voltage
- Transparent and latch modes supported
Applications
- Commercial networking and server PSU
- Commercial DC/DC converters
- DC input BLDC motor drivers
- Cordless power tools
- Headsets, headphones, and earbuds
C2155685 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |



