RENESAS R5F107AEGSP#X0

True Low Power Platform, High Resolution PWM and Rich Analog, 2.7 V to 5.5 V operation, 32 to 64 Kbyte Flash, for Inverter Control, Digital Power Control and Lighting Control Applications

• Ultra-Low Power Technology
  • 2.7 V to 5.5 V operation from a single supply
  • Stop (RAM retained): 0.23 µA, (LVD enabled): 0.31 µA
  • Halt (RTC + LVD): 0.60 µA
  • Operating: 156.25 µA/MHz
• 16-bit RL78 CPU Core
  • Delivers 41 DMIPS at maximum operating frequency of 32 MHz
  • Instruction execution: 86% of instructions can be executed in 1 to 2 clock cycles
  • CISC architecture (Harvard) with 3-stage pipeline
  • Multiply signed & unsigned: 16×16 to 32-bit result in 1 clock cycle
  • MAC: 16×16 to 32-bit result in 2 clock cycles
  • 16-bit barrel shifter for shift & rotate in 1 clock cycle
  • 1-wire on-chip debug function
• Main Flash Memory
  • Density: 32 KB to 64 KB
  • Block size: 1 KB
  • On-chip single voltage flash memory with protection from block erase/writing
  • Self-programming with secure boot swap function and flash shield window function
• Data Flash Memory
  • Data flash with background operation
  • Data flash size: 4 KB
  • Erase cycles: 1 million (typ.)
  • Erase/programming voltage: 2.7 V to 5.5 V
  • 2 KB to 4 KB size options
  • Supports operands or instructions
  • Back-up retention in all modes
• High-speed On-chip Oscillator
  • 32 MHz with +/-1% accuracy over voltage (2.7 V to 5.5 V) and temperature (-20℃ to 85℃)
  • Pre-configured settings: 32 MHz, 24 MHz, 16 MHz, 12 MHz, 8 MHz, 6 MHz, 4 MHz, 3 MHz, 2 MHz & 1 MHz
• Reset and Supply Management
  • Power-on reset (POR) monitor/generator
  • Low voltage detection (LVD) with 6 setting options (Interrupt and/or reset function)
• Data Memory Access (DMA) Controller
  • Up to 2 fully programmable channels
  • Transfer unit: 8- or 16-bit
• 16-bit timers KB0 to KB2, and KC0 for PWM output
  • 16-bit timers KB0 to KB2: maximum 6 outputs (3 channels × 2)
    • Smooth start function, dithering function, forced output stop function (unsynchronized with comparator or external interrupt) enables over-voltage protection, over-current protection and peak current control, and single/interleave PFC function
    • Average resolution <0.98 nsec output, 64 MHz (when using PLL) + dithering option
  • 16-bit timer KC0 (1 channel × 6 (output))
    • PWM output gating function by interlocking with 16-bit timers KB0, KB1, and KB2
• Extended-Function Timers
  • Multi-function 16-bit timers: Up to 8 channels
  • Real-time clock (RTC): 1 channel (full calendar and alarm function with watch correction function)
  • Interval timer: 12-bit, 1 channel
  • 15 kHz watchdog timer: 1 channel (window function)
• Multiple Communication Interfaces
  • Up to 1 channel × I²C multi-master (SMBus/PMBus support)
  • Up to 1 channel × CSI/SPI (7-, 8-bit)
  • Up to 3 channels × UART (7-, 8-, 9-bit), DALI support 1 channel (8-, 16-, 17-, 24-bit, master and slave)
  • Up to 1 channel × LIN
• Rich Analog
  • ADC: Up to 11 channels, 8/10-bit resolution, 2.125 µs conversion time
  • Supports 2.7 V
  • Internal voltage reference (1.45 V)
  • Comparator: High response time 70 ns (typ.), up to 6 channels, internal DAC 3 channels 8-bit resolution, window comparator mode
  • PGA (x4 to x32): 6 input channels
  • On-chip temperature sensor
• Safety Features (IEC or UL 60730 compliance)
  • Flash memory CRC calculation
  • RAM parity error check
  • RAM/SFR write protection
  • Illegal memory access detection
  • Clock stop/frequency detection
  • ADC self-test
• General Purpose I/O
  • 5-V tolerant, high-current (up to 8.5 mA per pin)
  • Open-drain, internal pull-up support
• Operating Ambient Temperature
  • Standard: -40℃ to +105℃
  • Extend: -40℃ to +125℃
• Package Type and Pin Count
  • SSOP: 20, 30, 38

• Inverter Control
• Digital Power Control
• Lighting Control