TI TMP100EVM
| Manufacturer | |
| MPN | TMP100EVM |
| LCSC Part # | C19447217 |
| Packaging | - |
| Customer # | |
| Key Attributes | I2C Sensor Evaluation Boards |
| Datasheet | TI TMP100EVM |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Sensor Evaluation Boards | |
| Manufacturer | TI | |
| Packaging | - | |
| Voltage - Supply | - | |
| Diameter (φD) | - | |
| Interface | I2C | |
| Length | - | |
| Features | Low-power mode;Threshold detection / event detection | |
| Width | - | |
| Current - Supply | - | |
| Height | - | |
| Sensor Type | - | |
| Operating Temperature | - |
| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Sensor Evaluation Boards | |
| Manufacturer | TI | |
| Packaging | - | |
| Voltage - Supply | - | |
| Diameter (φD) | - | |
| Interface | I2C | |
| Length | - |
| Type | Description | |
|---|---|---|
| Features | Low-power mode;Threshold detection / event detection | |
| Width | - | |
| Current - Supply | - | |
| Height | - | |
| Sensor Type | - | |
| Operating Temperature | - |
Introduction
The TMP10xEVM evaluation module is designed to be as simple as possible. It draws power from the connected RS-232 port and uses a FET pair and op-amp to interface the TMP10x's I²C connection with the RS-232 port. Only three inputs on the computer are available, but they are sufficient to control the TMP10x. One pin, DTR, is used to power the board, while the DSR and transmit data lines control SCL and SDA. The dual MOSFET Q1 is used to translate the high-voltage RS-232 levels to the TMP10x's logic levels. Pull-up resistors R1 and R2 are relatively large to minimize current consumption in the logic low state.
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Sensor Evaluation Boards | |
| Manufacturer | TI | |
| Packaging | - | |
| Voltage - Supply | - | |
| Diameter (φD) | - | |
| Interface | I2C | |
| Length | - | |
| Features | Low-power mode;Threshold detection / event detection | |
| Width | - | |
| Current - Supply | - | |
| Height | - | |
| Sensor Type | - | |
| Operating Temperature | - |
| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Sensor Evaluation Boards | |
| Manufacturer | TI | |
| Packaging | - | |
| Voltage - Supply | - | |
| Diameter (φD) | - | |
| Interface | I2C | |
| Length | - |
| Type | Description | |
|---|---|---|
| Features | Low-power mode;Threshold detection / event detection | |
| Width | - | |
| Current - Supply | - | |
| Height | - | |
| Sensor Type | - | |
| Operating Temperature | - |
Introduction
The TMP10xEVM evaluation module is designed to be as simple as possible. It draws power from the connected RS-232 port and uses a FET pair and op-amp to interface the TMP10x's I²C connection with the RS-232 port. Only three inputs on the computer are available, but they are sufficient to control the TMP10x. One pin, DTR, is used to power the board, while the DSR and transmit data lines control SCL and SDA. The dual MOSFET Q1 is used to translate the high-voltage RS-232 levels to the TMP10x's logic levels. Pull-up resistors R1 and R2 are relatively large to minimize current consumption in the logic low state.
Compliance & Export Codes
| Type | Details |
|---|---|
| ECCN | - |
| CNHTS | 8517799000 |
| USHTS | 8517790000 |
| TARIC | 8517790000 |
| CAHTS | 8517790000 |
| BRHTS | 85177900 |
| INHTS | 85177990 |
| MXHTS | 8517.70.99 |
| Type | Details |
|---|---|
| ECCN | - |
| CNHTS | 8517799000 |
| USHTS | 8517790000 |
| TARIC | 8517790000 |
| Type | Details |
|---|---|
| CAHTS | 8517790000 |
| BRHTS | 85177900 |
| INHTS | 85177990 |
| MXHTS | 8517.70.99 |