- Pinout
- Footprint
onsemi NCP711BMT300TBG
| Manufacturer | |
| MPN | NCP711BMT300TBG |
| LCSC Part # | C892728 |
| Packaging | WDFN-6-EP(2x2) |
| Customer # | |
| Key Attributes | 3V Positive Fixed WDFN-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators RoHS |
| Datasheet | onsemi NCP711BMT300TBG |
| RoHS Compliance | 4 documents available |
| Alternative Parts | 10 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | |
| Manufacturer | onsemi | |
| Packaging | WDFN-6-EP(2x2) | |
| Output Voltage | 3V | |
| Number of Outputs | 1 | |
| Operating Temperature | -40℃~+125℃@(Tj) | |
| Supply Current (Iq) | 1.8uA | |
| Output Configuration | Positive | |
| Operating Voltage | 18V | |
| Output Current | 100mA | |
| Features | Enable control;Operating status indication;Built-in soft-start;Over Current Protection;Thermal shutdown;Input under-voltage protection | |
| Output Type | Fixed |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | |
| Manufacturer | onsemi | |
| Packaging | WDFN-6-EP(2x2) | |
| Output Voltage | 3V | |
| Number of Outputs | 1 | |
| Operating Temperature | -40℃~+125℃@(Tj) |
| Type | Description | |
|---|---|---|
| Supply Current (Iq) | 1.8uA | |
| Output Configuration | Positive | |
| Operating Voltage | 18V | |
| Output Current | 100mA | |
| Features | Enable control;Operating status indication;Built-in soft-start;Over Current Protection;Thermal shutdown;Input under-voltage protection | |
| Output Type | Fixed |
Introduction
The NCP711 device is based on unique combination of features − very low quiescent current, fast transient response and high input and output voltage ranges. The NCP711 is CMOS LDO regulator designed for up to 18 V input voltage and 100 mA output current. Quiescent current of only 1 μA makes this device ideal solution for battery− powered, always−on systems. Several fixed output voltage versions are available as well as the adjustable version. The device (version B) implements power good circuit (PG) which indicates that output voltage is in regulation. This signal could be used for power sequencing or as a microcontroller reset. Internal short circuit and over temperature protections saves the device against overload conditions.
Features
- Operating Input Voltage Range: 2.7 V to 18 V
- Output Voltage: 1.2 V to 17 V
- Capable of Sourcing 140 mA Peak Output Current
- Low Shutdown Current: 100 nA typ.
- Very Low Quiescent Current: 1 μA typ.
- Low Dropout: 215 mV typ. at 100 mA
- Output Voltage Accuracy ±1%
- Power Good Output (Version B)
- Stable with Small 1 μF Ceramic Capacitors
- Built−in Soft Start Circuit to Suppress Inrush Current
- Over−Current and Thermal Shutdown Protections
- Available in Small TSOP−5 and WDFN6 (2x2) Packages
- These Devices are Pb−Free and are RoHS Compliant
Applications
- Battery Power Tools and Equipment
- Home Automation
- RF Devices
- Metering
- Remote Control Devices
- White Goods
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 0.977 | $ 0.98 |
| 10+ | $ 0.9545 | $ 9.55 |
| 30+ | $ 0.94 | $ 28.20 |
| 100+ | $ 0.9255 | $ 92.55 |
Standard Packaging3000/Full Reel | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | |
| Manufacturer | onsemi | |
| Packaging | WDFN-6-EP(2x2) | |
| Output Voltage | 3V | |
| Number of Outputs | 1 | |
| Operating Temperature | -40℃~+125℃@(Tj) | |
| Supply Current (Iq) | 1.8uA | |
| Output Configuration | Positive | |
| Operating Voltage | 18V | |
| Output Current | 100mA | |
| Features | Enable control;Operating status indication;Built-in soft-start;Over Current Protection;Thermal shutdown;Input under-voltage protection | |
| Output Type | Fixed |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | |
| Manufacturer | onsemi | |
| Packaging | WDFN-6-EP(2x2) | |
| Output Voltage | 3V | |
| Number of Outputs | 1 | |
| Operating Temperature | -40℃~+125℃@(Tj) |
| Type | Description | |
|---|---|---|
| Supply Current (Iq) | 1.8uA | |
| Output Configuration | Positive | |
| Operating Voltage | 18V | |
| Output Current | 100mA | |
| Features | Enable control;Operating status indication;Built-in soft-start;Over Current Protection;Thermal shutdown;Input under-voltage protection | |
| Output Type | Fixed |
Introduction
The NCP711 device is based on unique combination of features − very low quiescent current, fast transient response and high input and output voltage ranges. The NCP711 is CMOS LDO regulator designed for up to 18 V input voltage and 100 mA output current. Quiescent current of only 1 μA makes this device ideal solution for battery− powered, always−on systems. Several fixed output voltage versions are available as well as the adjustable version. The device (version B) implements power good circuit (PG) which indicates that output voltage is in regulation. This signal could be used for power sequencing or as a microcontroller reset. Internal short circuit and over temperature protections saves the device against overload conditions.
Features
- Operating Input Voltage Range: 2.7 V to 18 V
- Output Voltage: 1.2 V to 17 V
- Capable of Sourcing 140 mA Peak Output Current
- Low Shutdown Current: 100 nA typ.
- Very Low Quiescent Current: 1 μA typ.
- Low Dropout: 215 mV typ. at 100 mA
- Output Voltage Accuracy ±1%
- Power Good Output (Version B)
- Stable with Small 1 μF Ceramic Capacitors
- Built−in Soft Start Circuit to Suppress Inrush Current
- Over−Current and Thermal Shutdown Protections
- Available in Small TSOP−5 and WDFN6 (2x2) Packages
- These Devices are Pb−Free and are RoHS Compliant
Applications
- Battery Power Tools and Equipment
- Home Automation
- RF Devices
- Metering
- Remote Control Devices
- White Goods
C892728 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | ECL99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | ECL99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Alternative Parts
| MPN | Manufacturer | Packaging | Availability | Unit Price | ||
|---|---|---|---|---|---|---|
| AP7383-30FDC-7 | DIODES | UDFN2020-6 | 30 | $ 0.1904 | ||
| TPS70930DRVR | TI | WSON-6-EP(2x2) | 10 | $ 1.5046 | ||
| NCV8711BMTW300TBG | onsemi | WDFN-6-EP(2x2) | 0 | $ 0.5396 | ||
| NCP730BMT300TBG | onsemi | WDFN-6-EP(2x2) | 0 | $ 0.7496 | ||
| TPS70930QDRVRQ1 | TI | WSON-6-EP(2x2) | 0 | $ 1.3353 | ||
| TPS70930DRVT | TI | WSON-6-EP(2x2) | 0 | $ 1.6553 | ||
| SGM2211-3.0XTDI6G/TR | SGMICRO | TDFN-2x2-6AL | 0 | $ 1.7856 | ||
| AP7387Q-30FDCW-7 | DIODES | UDFN2020-6 | 0 | $ 1.0161 | ||
| NCP716MT30TBG | onsemi | WDFN-6-EP(2x2) | 0 | $ 0.4039 | ||
| AP7387-30FDCR-7 | DIODES | UDFN2020-6 | 0 | $ 0.5425 |