Broadcom ACPL-M62L-560E

The ACPL-M62L is an optocoupler that combines an AlGaAs LED with an integrated high-gain photodetector to meet low power consumption requirements. This optocoupler features a maximum IDD current consumption as low as 1.5 mA across the entire temperature range. With a forward current as low as 2 mA, it can be driven directly by most microprocessors. The ACPL-M62L supports 3.3 V and 5 V supply voltages, with guaranteed AC and DC operating parameters over a temperature range of -40°C to +105°C. The detector IC output is open-drain type. An internal Faraday shield provides a common mode transient immunity specification of 20 kV/μs. This unique design achieves TTL/CMOS compatibility while providing maximum AC and DC circuit isolation. These optocouplers are suitable for high-speed logic interfaces with extremely low power consumption. A 0.1 μF bypass capacitor must be connected between the VDD pin and the GND pin.

• Ultra-low IDD current consumption: 1.5 mA max
• Low input current capability: 2 mA
• Open-drain output
• SO-5 package
• Minimum CMR of 20 kV/μs at VCM = 1000 V
• High speed: 10 MBd min
• AC and DC performance guaranteed over wide temperature range of -40°C to +105°C
• Safety and regulatory approvals (pending):
  • UL 1577 recognized - 3750 Vrms for 1 minute
  • CSA approved
  • IEC/EN/DIN EN 60747-5-5 reinforced insulation certified

• Communication interfaces: I²C bus, CAN bus
• Microprocessor system interfaces
• Digital isolation for A/D and D/A conversion