LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
ADI LTC3649EUFD#TRPBF product image
Images for reference only

ADI LTC3649EUFD#TRPBF

Manufacturer
MPN
LTC3649EUFD#TRPBF
LCSC Part #
C685659
Packaging
QFN-28-EP(4x5)
Customer #
Key Attributes
60V, 4A Synchronous Step-Down Regulator with Rail-to-Rail Programmable Output
DatasheetADI LTC3649EUFD#TRPBF
RoHS Compliance1 documents available
Alternative Parts2
Out of Stock
Notify Me
Minimum: 1Multiple: 1Sales Unit: Piece
Add to BOM List
QtyUnit Price(Reference Only)Total Amount
1+$ 20.0198$ 20.02
30+$ 19.0271$ 570.81
Standard Packaging2500/Full Reel
Better price for more quantity?
$

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
ManufacturerADI
PackagingQFN-28-EP(4x5)
Operating Temperature-40℃~+125℃@(TJ)
Frequency - Switching300kHz~3MHz
FunctionStep-down type
Number of Outputs1
FeaturesAdjustable current limiting;Cycle-by-cycle current limiting;Adjustable soft-start;Frequency synchronization;Cable compensation;Built-in LDO regulator;Operating status indication;Overcurrent Protection
Output TypeAdjustable
TopologyBuck
Operating Voltage3.1V~60V
Switch tube (built-in/external)Built-in
Output Current4A
Output Voltage0V~55V
Quiescent Current440uA

Introduction

AI Translation

The LTC3649 is a high efficiency 60V, 4A synchronous monolithic step-down regulator. The regulator features a single resistor programmable output voltage, internal compensation and high efficiencies over a wide VOUT range. The step-down regulator operates from an input voltage range of 3.1V to 60V and provides an adjustable rail-to-rail output range from (VIN - 0.5V) to ground while delivering up to 4A of output current. The switching frequency is also adjusted with an external resistor. A user-selectable mode input is provided to allow the user to trade off ripple noise for efficiency at light loads; Burst Mode operation provides the highest efficiency at light loads, while forced continuous mode provides low output ripple. The MODE/ SYNC pin can also be used to allow the user to synchronize the switching frequency to an external clock. The LTC3649 operates with a peak current mode architecture that allows for fast transient response with inherent cycle-to-cycle current limit protection. It also features programmable output current limit, current monitoring and input voltage regulation.

Features

AI Translation
  • Wide VIN Range: 3.1V to 60V
  • Wide VOUT Range: 0V to (VIN - 0.5V)
  • Single Resistor VOUT Programming
  • Integrated 110mΩ Top N-Channel/50mΩ Bottom N-Channel MOSFETs
  • 95% Efficiency with 12VIN and 5VOUT
  • Regulated 10:1 Current Limit, Shutdown IQ: 18µA
  • Accurate Current Monitoring (±4%) without Sense Resistor
  • Accurate Resistor Programmable Frequency (300kHz to 3MHz) with ±50% Frequency Sync Range
  • Accurate Programmable Output Current
  • Input Voltage Regulation for MPPT Applications
  • ±0.8% Output Voltage Accuracy
  • Peak Current Mode Operation
  • Programmable Wire Drop Compensation
  • Burst Mode Operation, Forced Continuous Mode
  • Internal Compensation and Programmable Soft-Start
  • Overtemperature Protection
  • Available in Thermally Enhanced 28-Lead (4mm × 5mm) QFN and TSSOP Packages

Applications

AI Translation
  • Industrial Applications
  • Automotive Applications

Alternative Parts

MPNManufacturerPackagingAvailabilityUnit Price
LTC3649IUFD#PBFADIQFN-28-EP(4x5)0$ 11.8524
LTC3649IUFD#TRPBFADIQFN-28-EP(4x5)0$ 11.8524