ADI LTC3526EDC#TRPBF

The LTC3526, /LTC3526B are synchronous, fixed frequency step-up DC/DC converters with output disconnect. Synchronous rectification enables high efficiency in the low profile 2mm×2mm DFN package. Battery life in single AA/AAA powered products is extended further with an 850mV start-up voltage and operation down to 500mV once started. A switching frequency of 1MHz minimizes solution footprint by allowing the use of tiny, low profile inductors and ceramic capacitors. The current mode PWM design is internally compensated, reducing external parts count. The LTC3526 features automatic Burst Mode operation at light load conditions, while the LTC3526B features continuous switching at light loads. Anti-ringing control circuitry also reduces EMI concerns by damping the inductor in discontinuous mode. Additional features include a low shutdown current of under 1µA and thermal shutdown. The LTC3526/LTC3526B are housed in 2mm×2mm×0.75mm DFN package.

• Delivers 3.3V at 100mA from a Single Alkaline/ NiMH Cell or 3.3V at 200mA from Two Cells
• VIN Start-Up Voltage: 850mV
• 1.61 to 5.25V VOUT Range
• Up to 94% Efficiency
• Output Disconnect
• 1MHz Fixed Frequency Operation
• VIN > VOUT Operation
• Integrated Soft-Start
• Current Mode Control with Internal Compensation
• Automatic Burst Mode Operation with 9µA Quiescent Current (LTC3526)
• Low Noise PWM Operation (LTC3526B)
• Internal Synchronous Rectifier
• Logic Controlled Shutdown (IQ < 1µA)
• Anti-Ringing Control
• Low Profile (2mm×2mm×0.75mm) DFN Package

• Medical Instruments
• Flash-Based MP3 Players
• Noise Canceling Headphones
• Wireless Mice
• Bluetooth Headsets