Imágenes ilustrativas
Modelos EDAEasyEDA
MICROCHIP PIC18F8393-I/PT
| Fabricante | |
| N.º de pieza fab. | PIC18F8393-I/PT |
| Nº LCSC | C635543 |
| Emb. | TQFP-80(12x12) |
| Número de Cliente | |
| Atrib. clave | PIC 8 Bit 40MHz TQFP-80(12x12) Microcontrollers RoHS |
| Hoja de Datos | MICROCHIP PIC18F8393-I/PT |
| Cumplimiento RoHS | 1 documentos disponibles |
| Piezas alternativas | 10 |
Especificaciones del Producto
Todo
| Tipo | Descripción | |
|---|---|---|
| Categoría | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Fabricante | MICROCHIP | |
| Emb. | TQFP-80(12x12) | |
| Number of I/O | 66 | |
| Operating Temperature | -40℃~+85℃ | |
| Program Memory Type | FLASH | |
| Voltage - Supply | 4.2V~5.5V | |
| EEPROM | - | |
| Program Storage Size | 8KB | |
| CPU Core | PIC | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 40MHz | |
| Oscillator Type | Built-in |
| Tipo | Descripción | |
|---|---|---|
| Categoría | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Fabricante | MICROCHIP | |
| Emb. | TQFP-80(12x12) | |
| Number of I/O | 66 | |
| Operating Temperature | -40℃~+85℃ | |
| Program Memory Type | FLASH | |
| Voltage - Supply | 4.2V~5.5V |
| Tipo | Descripción | |
|---|---|---|
| EEPROM | - | |
| Program Storage Size | 8KB | |
| CPU Core | PIC | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 40MHz | |
| Oscillator Type | Built-in |
Ayuda y comentariosMostrar productos similares (0) >
Características
Traducción por IA
- Direct Driving of LCD Panel
- Up to 192 Pixels: Software-Selectable
- Programmable LCD Timing module: Multiple LCD timing sources available; Up to four commons: Static, 1/2, 1/3 or 1/4 multiplex; Static, 1/2 or 1/3 bias configuration
- Can Drive LCD Panel while in Sleep mode for Low-Power Operation
- Run: CPU On, Peripherals On
- Idle: CPU Off, Peripherals On
- Sleep: CPU Off, Peripherals Off
- Ultra Low 50 nA Input Leakage
- Run mode Current Down to 14 μA Typical
- Idle mode Currents Down to 2.3 μA Typical
- Sleep mode Currents Down to 0.1 μA Typical
- Timer1 Oscillator: 1.0 μAᵢ, 32 kHz, 2V Typical
- Watchdog Timer: 1.7 μA Typical
- Two-Speed Oscillator Start-up
- Four Crystal modes, up to 40 MHz
- 4× Phase Lock Loop (available for crystal and internal oscillators)
- Two External RC modes, up to 4 MHz
- Two External Clock modes, up to 40 MHz
- Internal Oscillator Block: Fast wake from Sleep and Idle, 1 μs typical; Eight selectable frequencies, from 31 kHz to 8 MHz; Provides a complete range of clock speeds from 31 kHz to 32 MHz when used with PLL; User-tunable to compensate for frequency drift
- Secondary Oscillator Using Timer1 at 32 kHz
- Fail-Safe Clock Monitor: Allows for safe shutdown if peripheral clock stops
- 12-Bit, up to 12-Channel Analog-to-Digital (A/D) Converter module: Auto-acquisition capability; Conversion available during Sleep
- High-Current Sink/Source 25 mA/25 mA
- Four External Interrupts
- Four Input Change Interrupts
- Four 8-Bit/16-Bit Timer/Counter modules
- Real-Time Clock (RTC) Software module: Configurable 24-hour clock, calendar, automatic 100-year or 12,800-year, day-of-week calculator; Uses Timer1
- Up to Two Capture/Compare/PWM (CCP) modules
- Master Synchronous Serial Port (MSSP) module Supporting Three-Wire SPI (all four modes) and I2C Master and Slave modes
- Addressable USART module: Supports RS-485 and RS-232
- Enhanced Addressable USART module: Supports RS-485, RS-232 and LIN/J2602; Auto-wake-up on Start bit; Auto-Baud Detect
- Dual Analog Comparators with Input Multiplexing
- Programmable 16-Level High/Low-Voltage Detection (HLVD) module: Supports interrupt on High/Low-Voltage Detection
- C Compiler Optimized Architecture: Optional extended instruction set designed to optimize re-entrant code
- 1000 Erase/Write Cycle Flash Program Memory, Typical
- Flash Retention: 100 Years Typical
- Priority Levels for Interrupts
- 8×8 Single-Cycle Hardware Multiplier
- Extended Watchdog Timer (WDT): Programmable period from 4 ms to 132s; 2% stability over VDD and temperature
- In-Circuit Serial Programming (ICSP) via Two Pins
- In-Circuit Debug (ICD) via Two Pins
- Wide Operating Voltage Range: 2.0V to 5.5V
- Programmable Brown-out Reset (BOR) with Software Enable Option
Agotado
Avisarme
Mínimo: 1Múltiplo: 1Unidad de venta: Piece
Añadir a la Lista BOM
| Cant. | Prec. unit.(Solo como referencia) | Importo total |
|---|---|---|
| 1+ | $ 3.0063 | $ 3.01 |
| 10+ | $ 2.5651 | $ 25.65 |
| 30+ | $ 2.3045 | $ 69.14 |
| 100+ | $ 2.0392 | $ 203.92 |
| 500+ | $ 1.9173 | $ 958.65 |
| 1,000+ | $ 1.8618 | $ 1861.80 |
Encapsulado Estándar119/Full Tray | ||
¿Mejor precio por mayor cantidad?
$
Especificaciones del Producto
Todo
| Tipo | Descripción | |
|---|---|---|
| Categoría | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Fabricante | MICROCHIP | |
| Emb. | TQFP-80(12x12) | |
| Number of I/O | 66 | |
| Operating Temperature | -40℃~+85℃ | |
| Program Memory Type | FLASH | |
| Voltage - Supply | 4.2V~5.5V | |
| EEPROM | - | |
| Program Storage Size | 8KB | |
| CPU Core | PIC | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 40MHz | |
| Oscillator Type | Built-in |
| Tipo | Descripción | |
|---|---|---|
| Categoría | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Fabricante | MICROCHIP | |
| Emb. | TQFP-80(12x12) | |
| Number of I/O | 66 | |
| Operating Temperature | -40℃~+85℃ | |
| Program Memory Type | FLASH | |
| Voltage - Supply | 4.2V~5.5V |
| Tipo | Descripción | |
|---|---|---|
| EEPROM | - | |
| Program Storage Size | 8KB | |
| CPU Core | PIC | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 40MHz | |
| Oscillator Type | Built-in |
Ayuda y comentariosMostrar productos similares (0) >
Características
Traducción por IA
- Direct Driving of LCD Panel
- Up to 192 Pixels: Software-Selectable
- Programmable LCD Timing module: Multiple LCD timing sources available; Up to four commons: Static, 1/2, 1/3 or 1/4 multiplex; Static, 1/2 or 1/3 bias configuration
- Can Drive LCD Panel while in Sleep mode for Low-Power Operation
- Run: CPU On, Peripherals On
- Idle: CPU Off, Peripherals On
- Sleep: CPU Off, Peripherals Off
- Ultra Low 50 nA Input Leakage
- Run mode Current Down to 14 μA Typical
- Idle mode Currents Down to 2.3 μA Typical
- Sleep mode Currents Down to 0.1 μA Typical
- Timer1 Oscillator: 1.0 μAᵢ, 32 kHz, 2V Typical
- Watchdog Timer: 1.7 μA Typical
- Two-Speed Oscillator Start-up
- Four Crystal modes, up to 40 MHz
- 4× Phase Lock Loop (available for crystal and internal oscillators)
- Two External RC modes, up to 4 MHz
- Two External Clock modes, up to 40 MHz
- Internal Oscillator Block: Fast wake from Sleep and Idle, 1 μs typical; Eight selectable frequencies, from 31 kHz to 8 MHz; Provides a complete range of clock speeds from 31 kHz to 32 MHz when used with PLL; User-tunable to compensate for frequency drift
- Secondary Oscillator Using Timer1 at 32 kHz
- Fail-Safe Clock Monitor: Allows for safe shutdown if peripheral clock stops
- 12-Bit, up to 12-Channel Analog-to-Digital (A/D) Converter module: Auto-acquisition capability; Conversion available during Sleep
- High-Current Sink/Source 25 mA/25 mA
- Four External Interrupts
- Four Input Change Interrupts
- Four 8-Bit/16-Bit Timer/Counter modules
- Real-Time Clock (RTC) Software module: Configurable 24-hour clock, calendar, automatic 100-year or 12,800-year, day-of-week calculator; Uses Timer1
- Up to Two Capture/Compare/PWM (CCP) modules
- Master Synchronous Serial Port (MSSP) module Supporting Three-Wire SPI (all four modes) and I2C Master and Slave modes
- Addressable USART module: Supports RS-485 and RS-232
- Enhanced Addressable USART module: Supports RS-485, RS-232 and LIN/J2602; Auto-wake-up on Start bit; Auto-Baud Detect
- Dual Analog Comparators with Input Multiplexing
- Programmable 16-Level High/Low-Voltage Detection (HLVD) module: Supports interrupt on High/Low-Voltage Detection
- C Compiler Optimized Architecture: Optional extended instruction set designed to optimize re-entrant code
- 1000 Erase/Write Cycle Flash Program Memory, Typical
- Flash Retention: 100 Years Typical
- Priority Levels for Interrupts
- 8×8 Single-Cycle Hardware Multiplier
- Extended Watchdog Timer (WDT): Programmable period from 4 ms to 132s; 2% stability over VDD and temperature
- In-Circuit Serial Programming (ICSP) via Two Pins
- In-Circuit Debug (ICD) via Two Pins
- Wide Operating Voltage Range: 2.0V to 5.5V
- Programmable Brown-out Reset (BOR) with Software Enable Option
C635543 Biblioteca EasyEDA
Cumplimiento & Códigos de Exportación
| Tipo | Detalles |
|---|---|
| RoHS | ROHS Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Tipo | Detalles |
|---|---|
| RoHS | ROHS Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC |
| Tipo | Detalles |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |
Piezas alternativas
| MPN | Fabricante | Empaque | Disponibilidad | Precio unitario | ||
|---|---|---|---|---|---|---|
| PIC18F8390-I/PT | MICROCHIP | TQFP-80(12x12) | 5 | $ 10.1152 | ||
| PIC18F8390T-I/PT | MICROCHIP | TQFP-80(12x12) | 0 | $ 14.6949 | ||
| PIC18F8393T-I/PT | MICROCHIP | TQFP-80(12x12) | 0 | $ 3.034 | ||
| PIC18F8490-I/PT | MICROCHIP | TQFP-80(12x12) | 0 | $ 3.9688 | ||
| PIC18F8490T-I/PT | MICROCHIP | TQFP-80(12x12) | 0 | $ 7.9319 | ||
| PIC18F8493T-I/PT | MICROCHIP | TQFP-80(12x12) | 0 | $ 5.4825 | ||
| PIC18F8493-I/PT | MICROCHIP | TQFP-80(12x12) | 0 | $ 8.4814 | ||
| PIC18F8390-E/PT | MICROCHIP | TQFP-80(12x12) | 0 | $ 4.9793 | ||
| PIC18F8490-E/PT | MICROCHIP | TQFP-80(12x12) | 0 | $ 8.6389 | ||
| PIC18LF8390-I/PT | MICROCHIP | TQFP-80(12x12) | 0 | $ 7.4133 |