LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
MICROCHIP MCP8025A-115H/PT product image
Images for reference only

MICROCHIP MCP8025A-115H/PT

Manufacturer
MPN
MCP8025A-115H/PT
LCSC Part #
C633723
Packaging
TQFP-48-EP(7x7)
Customer #
Key Attributes
6V~19V TQFP-48-EP(7x7) Motor Drivers, Controllers RoHS
DatasheetMICROCHIP MCP8025A-115H/PT
RoHS Compliance2 documents available
Out of Stock
Notify Me
Minimum: 1Multiple: 1Sales Unit: Piece
Add to BOM List
QtyUnit Price(Reference Only)Total Amount
1+$ 8.5509$ 8.55
250+$ 3.3092$ 827.30
500+$ 3.1935$ 1596.75
1,000+$ 3.1364$ 3136.40
Standard Packaging250/Full Tray
Better price for more quantity?
$

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers
ManufacturerMICROCHIP
PackagingTQFP-48-EP(7x7)
Drive TypeThree Phase
FeaturesInterleaved conduction protection
Voltage - Supply6V~19V
Technology-
Interface-
Operating Temperature-40℃~+150℃
Supply Current (Iq)175uA
Output Current-
Number of Half Bridges3
Peak Current500mA
RDS(on)-

Introduction

AI Translation

The MCP8025A/6 devices are three-phase BLDC motor power modules integrating three half-bridge drivers capable of driving three pairs of external NMOS/NMOS transistor pairs. The three half-bridge drivers provide 0.5A peak output current at 12V for driving high-side and low-side NMOS MOSFET transistors. The drivers feature shoot-through, overcurrent, and short-circuit protection. A sleep mode is included to achieve a typical "key-off" quiescent current of 5μA. The MCP8025A device integrates a comparator, a buck voltage regulator, two LDO regulators, power supply monitoring comparators, an over-temperature sensor, a LIN transceiver, zero-crossing detectors, a neutral point emulator, and an op-amp for motor current monitoring. A phase comparator and multiplexer allow hardware commutation detection. The neutral point emulator enables commutation detection without a motor neutral point tap. The buck converter delivers 750mW of power for supplying a companion microcontroller. The buck regulator can be disabled if not used. On-board 5V and 12V LDO regulators provide 30mA of current. The MCP8026 device replaces the LIN transceiver, neutral point emulator, and zero-crossing detectors found in the MCP8025A with two level shifters and two additional op-amps. The MCP8025A/6 operating temperature range is specified from -40°C to +150°C. Package options include a 40-pin 5×5mm QFN with exposed pad and a 48-pin 7×7mm TQFP.

Applications

AI Translation
  • Automotive fuel, water, and ventilation motors
  • Home appliances
  • Permanent magnet synchronous motor control
  • Hobby aircraft
  • Hobby boats