TE Connectivity 5499141-4

For clarity, the pop-up latch is omitted from this view. See tables and notes on page 2. 1. Dimensioned coordinates apply from the basic position. The 10 and 14 pin sizes contain only one slot for a snap-in polarizer (polarization), located as shown. 3. The 10 pin size contains only one slot for dual polarization, located as shown. 4. Recommended PCB thickness is 1.57 [.062]. 5. Distance required for the ejector latch in the open position. Housing and latch: glass-filled nylon or polyester, UL94V-0 rated, color per table. Contacts: brass. 7. Contacts: flash gold over palladium-nickel plating, minimum total thickness 0.76μm [.000030] over selective plating area, minimum tin plating thickness 2.54μm [.000100] on solder tail, minimum nickel underplate thickness 1.27μm [.000050] over entire contact. Alternatively, minimum gold plating thickness 0.76μm [.000030] over selective plating area, minimum tin plating thickness 2.54μm [.000100] on solder tail, minimum nickel underplate thickness 1.27μm [.000050] over entire contact. Datums M and N are determined by the customer.