Images for reference only
EDA ModelsEasyEDA
ROHM PMR50HZPJV1L0
| Manufacturer | |
| MPN | PMR50HZPJV1L0 |
| LCSC Part # | C3916079 |
| Packaging | 2010 |
| Customer # | |
| Key Attributes | RES 1mΩ ±5% 1W 2010 |
| Datasheet | ROHM PMR50HZPJV1L0 |
| RoHS Compliance | 2 documents available |
| Alternative Parts | 10 |
Products Specifications
All
| Type | Description | |
|---|---|---|
| Category | Passives/Resistors/Chip Resistor - Surface Mount | |
| Manufacturer | ROHM | |
| Packaging | 2010 | |
| Power(Watts) | 1W | |
| Resistance | 1mΩ | |
| Operating Temperature | -55℃~+155℃ | |
| Type | - | |
| Temperature Coefficient | ±100ppm/℃ | |
| Tolerance | ±5% |
| Type | Description | |
|---|---|---|
| Category | Passives/Resistors/Chip Resistor - Surface Mount | |
| Manufacturer | ROHM | |
| Packaging | 2010 | |
| Power(Watts) | 1W | |
| Resistance | 1mΩ |
| Type | Description | |
|---|---|---|
| Operating Temperature | -55℃~+155℃ | |
| Type | - | |
| Temperature Coefficient | ±100ppm/℃ | |
| Tolerance | ±5% |
Help & FeedbackShow similar products (0) >
Features
AI Translation
- Cover tape peel strength: 0.1N ≤ peel strength ≤ 0.8N
- When the top tape is peeled, the embossed tape shall not adhere to the top tape; peeling direction as shown below
- Cover tape (top tape) durability: after 120 hours at 60 ± 3℃ and 90~95% relative humidity, the top tape shall not detach from the carrier tape
- Components placed in pockets, same orientation (resistor components facing up)
- Cumulative pitch tolerance over 10 pitches shall be within ±0.2mm
- When the tape is bent at a radius of 15mm, the tape and pockets shall not be damaged
- Components in pockets shall not adhere to the carrier tape/cover tape
- When removing components from pockets, components shall not be obstructed by tape debris or foreign matter
- Top tape shall not cover the sprocket holes of the carrier tape
- Missing components shall not exceed 0.1% of total component count (labeled quantity) or 1 piece (whichever is greater), and no more than two consecutive missing components are permitted
- Tape feed direction shall be as shown in the figure
- Leader section contains only cover tape and empty pockets (no resistors)
- Trailer section consists of empty pockets (no resistors); the trailer tape shall not be secured to the reel with adhesive and must be easily pullable from the reel
Out of Stock
Notify Me
Minimum: 1Multiple: 1Sales Unit: Piece
Add to BOM List
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 0.1799 | $ 0.18 |
| 200+ | $ 0.0697 | $ 13.94 |
| 500+ | $ 0.0672 | $ 33.60 |
| 1,000+ | $ 0.066 | $ 66.00 |
Standard Packaging2000/Full Reel | ||
Better price for more quantity?
$
Products Specifications
All
| Type | Description | |
|---|---|---|
| Category | Passives/Resistors/Chip Resistor - Surface Mount | |
| Manufacturer | ROHM | |
| Packaging | 2010 | |
| Power(Watts) | 1W | |
| Resistance | 1mΩ | |
| Operating Temperature | -55℃~+155℃ | |
| Type | - | |
| Temperature Coefficient | ±100ppm/℃ | |
| Tolerance | ±5% |
| Type | Description | |
|---|---|---|
| Category | Passives/Resistors/Chip Resistor - Surface Mount | |
| Manufacturer | ROHM | |
| Packaging | 2010 | |
| Power(Watts) | 1W | |
| Resistance | 1mΩ |
| Type | Description | |
|---|---|---|
| Operating Temperature | -55℃~+155℃ | |
| Type | - | |
| Temperature Coefficient | ±100ppm/℃ | |
| Tolerance | ±5% |
Help & FeedbackShow similar products (0) >
Features
AI Translation
- Cover tape peel strength: 0.1N ≤ peel strength ≤ 0.8N
- When the top tape is peeled, the embossed tape shall not adhere to the top tape; peeling direction as shown below
- Cover tape (top tape) durability: after 120 hours at 60 ± 3℃ and 90~95% relative humidity, the top tape shall not detach from the carrier tape
- Components placed in pockets, same orientation (resistor components facing up)
- Cumulative pitch tolerance over 10 pitches shall be within ±0.2mm
- When the tape is bent at a radius of 15mm, the tape and pockets shall not be damaged
- Components in pockets shall not adhere to the carrier tape/cover tape
- When removing components from pockets, components shall not be obstructed by tape debris or foreign matter
- Top tape shall not cover the sprocket holes of the carrier tape
- Missing components shall not exceed 0.1% of total component count (labeled quantity) or 1 piece (whichever is greater), and no more than two consecutive missing components are permitted
- Tape feed direction shall be as shown in the figure
- Leader section contains only cover tape and empty pockets (no resistors)
- Trailer section consists of empty pockets (no resistors); the trailer tape shall not be secured to the reel with adhesive and must be easily pullable from the reel
C3916079 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8533211000 |
| USHTS | 8533210020 |
| TARIC | 8533210000 |
| CAHTS | 8533210000 |
| BRHTS | 85332110 |
| INHTS | 85332111 |
| MXHTS | 8533.21.01 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8533211000 |
| USHTS | 8533210020 |
| TARIC | 8533210000 |
| Type | Details |
|---|---|
| CAHTS | 8533210000 |
| BRHTS | 85332110 |
| INHTS | 85332111 |
| MXHTS | 8533.21.01 |
Alternative Parts
| MPN | Manufacturer | Packaging | Availability | Unit Price | ||
|---|---|---|---|---|---|---|
| LR2010-21R001F2 | RALEC | 2010 | 10 | $ 0.2056 | ||
| LR10FTDAR001 | Viking | 2010 | 546 | $ 0.4179 | ||
| WSL20101L000JTA18 | VISHAY | 2010 | 0 | $ 1.6788 | ||
| WSL20101L000JEA18 | VISHAY | 2010 | 0 | $ 0.8394 | ||
| TLR2HDTE1L00F75 | KOA | 2010 | 0 | $ 0.2328 | ||
| TLR2HWDTE1L00F75 | KOA | 2010 | 0 | $ 0.2487 | ||
| MSMA2010R0010FDM | EATON | 2010 | 0 | $ 0.4258 | ||
| TLR2HDTE1L00F50 | KOA | 2010 | 0 | $ 0.2606 | ||
| TLR2HWDTE1L00F50 | KOA | 2010 | 0 | $ 0.3277 | ||
| WSL20101L000FBA18 | VISHAY | 2010 | 0 | $ 3.0546 |