MAXIM MAX2371ETC+
| Manufacturer | |
| MPN | MAX2371ETC+ |
| LCSC Part # | C3187890 |
| Packaging | TQFN-12(3x3) |
| Customer # | |
| Key Attributes | 2.65V~3.3V 15dB 100MHz~1GHz 1.8dB 19.5dBm 5.5mA TQFN-12(3x3) RF Amplifiers RoHS |
| Datasheet | MAXIM MAX2371ETC+ |
| RoHS Compliance | 2 documents available |
| Alternative Parts | 4 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | RF and Wireless/RF Amplifiers | |
| Manufacturer | MAXIM | |
| Packaging | TQFN-12(3x3) | |
| Input Return Loss | -12dB | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage - Supply | 2.65V~3.3V | |
| Gain | 15dB | |
| Frequency Range | 100MHz~1GHz | |
| Output Return Loss | - | |
| Noise Figure | 1.8dB | |
| Features | Variable gain control;Low-power mode | |
| IP3 | -1dBm | |
| P1dB | 19.5dBm | |
| Current - Supply | 5.5mA |
| Type | Description | |
|---|---|---|
| Category | RF and Wireless/RF Amplifiers | |
| Manufacturer | MAXIM | |
| Packaging | TQFN-12(3x3) | |
| Input Return Loss | -12dB | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage - Supply | 2.65V~3.3V | |
| Gain | 15dB |
| Type | Description | |
|---|---|---|
| Frequency Range | 100MHz~1GHz | |
| Output Return Loss | - | |
| Noise Figure | 1.8dB | |
| Features | Variable gain control;Low-power mode | |
| IP3 | -1dBm | |
| P1dB | 19.5dBm | |
| Current - Supply | 5.5mA |
Introduction
The MAX2371/MAX2373 wideband low-noise amplifier (LNA) ICs are designed for direct conversion receiver (DCR) or very low intermediate frequency (VLIF) receiver applications. They contain single-channel, single-ended LNAs with switchable attenuator and automatic gain control (AGC) intended as a low-noise gain stage. These devices provide high gain-control range (typically 60dB) at radio frequency (RF) with excellent noise and reverse isolation characteristics. The MAX2371/MAX2373 can work over the frequency range from 100MHz to 1GHz. In practice, only a narrow band is needed in each application, so different matching circuits can be applied. The devices are dynamically configured through the digital/analog control pins to select either maximum gain and low noise figure or power-saving mode. In addition, the MAX2371/MAX2373 feature high/low-current modes, high/low attenuation modes, linearly controlled gain states, and shutdown mode.
Features
- Low Noise Figure (1.8dB typical)
- High Small-Signal Gain (15dB Nominal)
- Wide Frequency Range of Operation (100MHz to 1GHz)
- 20dB Step Attenuator
- 45dB AGC Range Excluding Step Attenuator
- 2.65V to 3.3V Single-Supply Operation
- Shutdown Mode
- 3.5mA Supply Current, Adjustable Down to 2.5mA
- 40dB Reverse Isolation
Applications
- Direct Conversion Receiver (DCR)
- Very Low IF Receiver
Products Specifications
| Type | Description | |
|---|---|---|
| Category | RF and Wireless/RF Amplifiers | |
| Manufacturer | MAXIM | |
| Packaging | TQFN-12(3x3) | |
| Input Return Loss | -12dB | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage - Supply | 2.65V~3.3V | |
| Gain | 15dB | |
| Frequency Range | 100MHz~1GHz | |
| Output Return Loss | - | |
| Noise Figure | 1.8dB | |
| Features | Variable gain control;Low-power mode | |
| IP3 | -1dBm | |
| P1dB | 19.5dBm | |
| Current - Supply | 5.5mA |
| Type | Description | |
|---|---|---|
| Category | RF and Wireless/RF Amplifiers | |
| Manufacturer | MAXIM | |
| Packaging | TQFN-12(3x3) | |
| Input Return Loss | -12dB | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage - Supply | 2.65V~3.3V | |
| Gain | 15dB |
| Type | Description | |
|---|---|---|
| Frequency Range | 100MHz~1GHz | |
| Output Return Loss | - | |
| Noise Figure | 1.8dB | |
| Features | Variable gain control;Low-power mode | |
| IP3 | -1dBm | |
| P1dB | 19.5dBm | |
| Current - Supply | 5.5mA |
Introduction
The MAX2371/MAX2373 wideband low-noise amplifier (LNA) ICs are designed for direct conversion receiver (DCR) or very low intermediate frequency (VLIF) receiver applications. They contain single-channel, single-ended LNAs with switchable attenuator and automatic gain control (AGC) intended as a low-noise gain stage. These devices provide high gain-control range (typically 60dB) at radio frequency (RF) with excellent noise and reverse isolation characteristics. The MAX2371/MAX2373 can work over the frequency range from 100MHz to 1GHz. In practice, only a narrow band is needed in each application, so different matching circuits can be applied. The devices are dynamically configured through the digital/analog control pins to select either maximum gain and low noise figure or power-saving mode. In addition, the MAX2371/MAX2373 feature high/low-current modes, high/low attenuation modes, linearly controlled gain states, and shutdown mode.
Features
- Low Noise Figure (1.8dB typical)
- High Small-Signal Gain (15dB Nominal)
- Wide Frequency Range of Operation (100MHz to 1GHz)
- 20dB Step Attenuator
- 45dB AGC Range Excluding Step Attenuator
- 2.65V to 3.3V Single-Supply Operation
- Shutdown Mode
- 3.5mA Supply Current, Adjustable Down to 2.5mA
- 40dB Reverse Isolation
Applications
- Direct Conversion Receiver (DCR)
- Very Low IF Receiver
C3187890 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |

